2×72 Belt Grinder Parts: Replacement Guide
2x72 belt grinder parts are the belts that wear out first: match the grit, pack and stated use to weld removal, deburring or knife sharpening.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Red Label Abrasives 2 X 72 Inch 36 Grit Metal9.6/10View on Amazon - 2
12 PCS 2 x 72 Inch Silicon Carbide Sanding Belts9.6/10View on Amazon - 3
HARFINGTON 2 x 72 Inch Sanding Belts9.6/10View on Amazon
A knife edge comes back from the grinder with a dull bevel, a weld bead stands proud of the joint, and the belt on the machine feels smooth where it once cut. The belt is the part that wears out first, and 2×72 belt grinder parts means the belts that fit that size, the grits that match the job, and the joints and backing that hold up while the belt runs. This guide sorts the belts in this guide by grit, pack and stated use, so the belt on the machine matches the work on the bench.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | Red Label Abrasives 2 X 72 Inch 36 Grit Metal | 9.6/10 | Buy on Amazon |
| 2 | 12 PCS 2 x 72 Inch Silicon Carbide Sanding Belts | 9.6/10 | Buy on Amazon |
| 3 | HARFINGTON 2 x 72 Inch Sanding Belts | 9.6/10 | Buy on Amazon |

Red Label Abrasives 2 X 72 Inch 36 Grit Metal
A 2 x 72 inch ceramic belt in 36 grit, in a 6 pack, made for heavy grinding, weld removal and deburring on ferrous metal.
Pros
- Ceramic grain stated for heavy grinding, weld removal and deburring
- Top coat stated to cut heat buildup for cooler grinding
- Runs wet or dry, per the maker
- Heavy duty Y weight backing, built in USA per the maker
Cons
- 36 grit only, so fine finishing needs a separate belt
- 6 pack covers 36 grit only, so a grit range needs more packs
- Ceramic grain suits heavy work, so light finishing may cut too fast
- Metal work is the stated use, so wood sanding is not covered by the stated uses

12 PCS 2 x 72 Inch Silicon Carbide Sanding Belts
A 12 pack of 2 x 72 inch silicon carbide belts in grits from 80 to 1000, with 2 pieces of each grit, for knife sharpening and metalworking.
Pros
- Grits 80, 120, 240, 400, 800 and 1000 in the pack
- 2 pieces of each grit, so a worn belt has a spare in the pack
- Runs wet or dry, per the maker
- Resin over resin bonding and anti-clogging stearate stated for belt life
Cons
- Silicon carbide is stated for light metal finishing, not heavy grinding
- No 36 grit in the set, so coarse weld removal needs a separate belt
- No warranty term is stated
- 2 x 72 inch size only, so it fits a 2 x 72 inch grinder and no other size

HARFINGTON 2 x 72 Inch Sanding Belts
A 6 pack of 2 x 72 inch zirconia belts in 36 grit for woodworking, metal polishing and knife sharpening.
Pros
- Zirconia particles stated for high hardness and long sharpness
- Diagonal overlapping joint stated to keep the interface firm
- Electrostatic sand coating stated to cut abrasive loss during use
- Stated uses cover wood, metal, knife sharpening and removing paint, burrs and welds
Cons
- 36 grit only, so fine finishing needs a separate belt
- No warranty term is stated
- 6 pack covers 36 grit only, so a grit range needs more packs
- 36 grit cuts coarse, so it can leave marks that a fine grit smooths after
2×72 belt grinder parts: what wears out
A belt wears at the grit, the joint and the backing. Grit dulls as it cuts, a joint that lifts will bump on every pass, and backing that cracks will not track straight. The belts in this guide state the grit and the pack size, and 2 of them state the joint, so a buyer can match the belt to the job before ordering.
How to match grit to the job
Coarse grit suits weld removal and heavy stock removal, while fine grit suits smoothing and sharpening. The 36 grit belts in this guide suit weld removal, deburring and coarse shaping, and the grits from 80 to 1000 suit a progression from shaping to a fine edge. A belt that runs wet or dry gives a shop the choice of dry grinding or wet sanding, and the maker states which belts allow wet use.
- 36 grit. Weld removal, deburring and coarse shaping on metal.
- 80 to 240 grit. Shaping and smoothing after coarse work.
- 400 to 1000 grit. Fine finishing and knife sharpening.
Side by side
| Product | Belt size | Grit | Pack | Gear Score |
|---|---|---|---|---|
| Red Label Abrasives 36 Grit Ceramic | 2 X 72 inch | 36 | 6 | 9.6/10 |
| Tonmp Silicon Carbide Assortment | 2 x 72 inch | 80, 120, 240, 400, 800, 1000 | 12 | 9.6/10 |
| HARFINGTON Zirconia 36 Grit | 2 x 72 inch | 36 | 6 | 9.6/10 |
The table above uses the stated size, grit and pack for each belt. A coarse belt and a fine set serve different steps, so the right pick depends on the step that needs doing, not on the pack size alone.
The belts for the bench
The belts below cover the steps above, from weld removal with 36 grit to a fine finish with the grits up to 1000, each in the 2 x 72 inch size this guide covers.
How to fit and run a belt
Fit the belt as the maker states: the HARFINGTON belt (on Amazon) has arrows on the back showing the sanding direction, and the Tonmp joint is bi-directional. Check that the joint sits flat before the machine runs. A belt that tracks off the wheels or rides on the edge will wear unevenly, so check the tracking and the tension the machine manual states before grinding. Clamp the work, keep guards in place, and keep gloves away from rotating parts. Keep hands clear of the belt while it runs, wear eye protection, and clear the bench of dust and loose material before starting.
Wet or dry belts state wet use, so a belt that does not state wet use stays dry. Store belts flat and dry, and check the joint and the grit before each use.
FAQ for welders
What size belt fits a 2×72 belt grinder?
A 2×72 belt grinder takes a belt stated as 2 x 72 inch, and HARFINGTON states the same size as 50 mm by 1829 mm. Check the size the machine states before ordering, as a belt of another size will not fit the wheels and platen.
Which grit removes a weld bead?
A 36 grit belt suits weld removal and deburring, and the ceramic and zirconia belts in this guide state that use. Start with the coarse grit for the bead, then move to a finer grit for smoothing, as a coarse belt alone leaves a rough surface.
Can a 2×72 belt run wet or dry?
Some belts state wet or dry use, and the Tonmp and Red Label Abrasives belts (on Amazon) in this guide state that the belt can run wet or dry. A belt that states dry use stays dry, and the HARFINGTON belt in this guide does not state wet use.
How many belts come in a pack?
The packs in this guide hold 12 belts or 6 belts, with the Tonmp pack holding 12 belts and the other packs holding 6 belts each. A pack of 12 covers a full grit range when the pack holds 2 pieces of each grit, while a 6 pack covers 36 grit only.
What grit suits knife sharpening?
Knife sharpening suits a fine grit for the edge, and the Tonmp set runs from 80 grit to 1000 grit for a progression from shaping to a fine edge. The HARFINGTON belt also states knife sharpening, in 36 grit for coarse work on a blade.
Related: belt grinder picks for welders, belt grinder picks for knife making, and the metal fab tools hub.




