Best Hole Saw Under $50 (2026): 3 Picks for the Shop
Three hole saws and kits under $50 compared by tooth type, size range, cutting depth, what ships in the box and stated materials.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
3 in Bi-Metal SawVIKITON 3 In Saw9.6/10View on Amazon - 2
Deep-Cut 3 in SawDiablo DHS30009.6/10View on Amazon - 3
9-Piece KitAmazon Basics 9-Pc9.6/10View on Amazon
Cutting a clean round hole for a junction box, a header panel or a sink cabinet starts with the right saw on the drill. The best hole saw under 50 is a bi-metal saw or kit that states its sizes, its tooth build and what ships in the box, without asking for a second purchase. This guide compares three picks by size range, tooth build, cutting depth, box contents and stated materials, using only what each listing publishes. Size range, depth and box contents separate the picks more than the tooth build, since all three use bi-metal construction.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- 3 in Bi-Metal Saw VIKITON 3 In Saw: 3 in bi-metal saw with arbor and bits in the box Check price on Amazon
- Deep-Cut 3 in Saw Diablo DHS3000: 2-3/8 in depth, variable tooth, Snap-Lock fit Check price on Amazon
- 9-Piece Kit Amazon Basics 9-Pc: 9 pieces, 6 saws, two arbors, case Check price on Amazon
The machines
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | 3 inch Hole Saw for Wood, Metal | 9.6/10 | Buy on Amazon |
| 2 | Diablo Bi-Metal Hole Saw - 3" Diameter | 9.6/10 | Buy on Amazon |
| 3 | Amazon Basics 9-Piece Bi-Metal High Speed Steel | 9.6/10 | Buy on Amazon |

3 inch Hole Saw for Wood, Metal
A 3 in bi-metal hole saw with arbor, drill bits and hex key, for wood, metal, plastic and drywall.
Pros
- Bi-metal build with high-speed steel teeth and a flexible steel body
- Arbor with drill bit, a replacement pilot bit and a hex key in the box
- States clean cuts on wood, plastic, drywall and thin metals, excluding stainless steel
- Lightweight build at 0.35 kg listed, with fast chip removal stated
Cons
- No warranty term is stated
- Not for brittle materials: glass, ceramic, tile, stone and masonry are excluded
- Single 3 in size only; no range of diameters
- Thin metals only; no thick plate rating is stated

Diablo Bi-Metal Hole Saw - 3" Diameter
A 3 in bi-metal hole saw with 2-3/8 in cutting depth and variable tooth design, for the Snap-Lock Plus mandrel system.
Pros
- 2-3/8 in cutting depth, the deepest stated here
- Variable tooth design stated for faster cuts with less vibration
- Fits the Snap-Lock Plus mandrel system, and all Diablo saws from 5/8 in to 6 in
- Tool-free plug ejection speeds material removal
Cons
- Mandrel not included; the box lists only the saw blade
- Warranty description names only Warranty, with no term stated
- Compatible materials list only engineered wood and wood in the spec table

Amazon Basics 9-Piece Bi-Metal High Speed Steel
A 9-piece bi-metal hole saw kit with 6 saws from 25/32 in to 2-11/16 in, two arbors and a carrying case.
Pros
- Six saws from 25/32 in to 2-11/16 in cover most shop holes
- Two hex arbors with pilot drills plus a hex key in the box
- States cutting for mild steel, aluminum, plastic and plasterboard
- HSS-M3 bi-metal with powder-coated finish and a carrying case
Cons
- No warranty term is stated
- 2.2 lb listed weight, heavier than the single saws
- No cutting depth is stated
- Largest saw 2-11/16 in; no 3 in or larger option
Other welders and gear to compare
8 inch Hole Saw for WoodCheck price on Amazon
2 inch Hole Saw for WoodCheck price on Amazon
4 inch Hole Saw for WoodCheck price on Amazon
6 inch Hole Saw for WoodCheck price on Amazon
5 inch Hole Saw for WoodCheck price on Amazon
Spec sheet comparison
| Saw | Gear Score | Size / range | Tooth / build | In the box | Warranty |
|---|---|---|---|---|---|
| VIKITON 3 In Saw | 9.6/10 | 3 in | Bi-metal, HSS teeth | Arbor, 2 bits, hex key | Not stated |
| Diablo DHS3000 | 9.6/10 | 3 in, 2-3/8 in deep | Bi-metal, variable tooth | Saw blade only | Not stated |
| Amazon Basics 9-Pc | 9.6/10 | 25/32 in to 2-11/16 in | HSS-M3 bi-metal | 2 arbors, case | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (22 October 2026). Where a listing states a figure two ways, the table shows both.
How to choose the best hole saw under 50 for shop work
Bi-metal teeth across the picks
All three listings are bi-metal with high-speed steel teeth: the VIKITON saw, the Diablo and the Amazon Basics kit. The Amazon Basics kit states cutting for mild steel, aluminum, plastic and plasterboard, and suits carpentry, construction and plumbing. Bi-metal suits thin metals as well as wood and plastic, and the VIKITON listing explicitly excludes stainless steel. Match the tooth build to the material, and see the cobalt vs bi-metal hole saw comparison for how the builds differ.
Diameter and depth
Sizes here run from 25/32 in in the kit to 3 in for the single saws. The two singles are both 3 in; the Amazon Basics kit covers 25/32 in to 2-11/16 in with six saws. Only the Diablo states a cutting depth, 2-3/8 in; the other listings give no depth figure. The Diablo bullets claim 40% deeper holes in a single pass than standard hole saws, and the kit sizes run 25/32 in, 1 in, 1-3/8 in, 1-9/16 in, 2 in and 2-11/16 in. The Diablo mandrel fits all Diablo hole saw sizes from 5/8 in to 6 in in diameter. For thin sheet metal, a step drill bit can beat a hole saw; the step drill bit vs hole saw guide covers that choice. A drill press vs hand drill comparison helps decide what to run the saw in.
What ships in the box
Box contents decide whether the saw is ready to run. The VIKITON 3 in ships with an arbor, a drill bit, a replacement pilot bit and a hex key. The Amazon Basics arbors take 14 to 30mm saws on the 1/4 in hex arbor and 32 to 152mm saws on the 7/16 in hex arbor. The Amazon Basics kit ships two arbors with pilot drills, a hex key and a carrying case. The Diablo ships the saw blade only, so the Snap-Lock Plus mandrel is a second purchase.
Arbors and mandrels
The arbor decides whether the saw runs straight out of the box. The VIKITON saw ships an arbor with a drill bit and a replacement pilot bit, and the listing describes assembly plainly: insert the arbor pilot bit through the center hole at the back of the hole saw, then rotate the arbor to tighten. That one assembly step covers the single saw, with a hex key in the box for the change. The Amazon Basics kit takes a different route, with two hex arbors in the case: the 1/4 in hex arbor carries a 75mm pilot drill and connects 14 to 30mm saws, while the 7/16 in hex arbor carries a 75mm pilot drill and connects 32 to 152mm saws. Check which arbor matches the saw diameter before drilling, since the two arbors cover different size bands.
The Diablo saw sits apart from the other two picks on this point. It fits the Snap-Lock Plus mandrel system, which the listing states allows quick and easy hole saw change without downtime, and the mandrel fits all Diablo hole saw sizes from 5/8 in to 6 in in diameter. The box lists only the saw blade, so a shop without that mandrel buys it separately. Tool-free plug ejection then speeds material removal once the saw is mounted, which matters on repeat holes where stopping to clear plugs slows the job. A shop already on the Diablo mandrel system gains depth and quick changes; a first-time buyer weighs the mandrel purchase against the ready-to-run VIKITON saw and the Amazon Basics kit.
Read the box contents against the job before ordering. A single saw with an arbor, a replacement pilot bit and a hex key covers a one-size job with nothing left to buy, while a kit with two arbors and a carrying case covers a run of different hole sizes in one case. The Diablo saw suits a shop that already owns the Snap-Lock Plus mandrel, since the blade alone leaves that purchase open. Tool-free plug ejection on the Diablo saw speeds clearing the cut plug between holes, and the VIKITON listing pairs its saw with fast chip removal and a lightweight build at 0.35 kg listed. The Amazon Basics kit lists a powder-coated finish on HSS-M3 bi-metal saws and a durable carrying case, which keeps the saws, arbors and hex key together between jobs.
Materials: what they cut and what they do not
Wood, plastic and drywall are common ground across these listings. The bi-metal saws add thin metals, with the VIKITON listing explicitly excluding stainless steel, and the Amazon Basics kit states mild steel, aluminum and plasterboard as well. Brittle materials are out: the listings exclude glass, ceramic, tile, granite, marble, porcelain, brick, masonry and natural stone. For thicker plate where a hole saw runs out of depth, the annular cutter vs hole saw guide covers the alternative.
Cutting safety. Hole saws throw hot chips and the teeth stay sharp after the cut. Wear eye protection and gloves, clamp the workpiece, keep hands clear of the spinning saw, and let the saw cool before touching it; the listings warn the surface runs hot after drilling. Stop immediately if abnormal vibration starts.
Before You Strike an Arc
- Check the box on arrival: the arbor, pilot bit and hex key should all be there; the Diablo ships the saw blade only.
- Match the arbor to the saw: the Amazon Basics arbors list which saw sizes each one takes.
- Cool the saw between holes in metal; the listings advise water or coolant with reduced feed speed.
FAQ for welders
What size hole saw do I need?
Match the saw to the hole. The kit runs from 25/32 in to 2-11/16 in, and the singles are both 3 in.
Can a hole saw cut stainless steel?
The VIKITON listing explicitly excludes stainless steel and rates its saw for thin metals. None of these listings states a stainless rating.
Do these hole saws include the arbor?
The VIKITON 3 in and the Amazon Basics kit both ship arbors with pilot bits. The Diablo ships the saw blade only, so the mandrel is extra.
Does the Diablo saw ship with a mandrel?
No. The box lists only the saw blade, so the Snap-Lock Plus mandrel is a separate purchase. That mandrel fits all Diablo hole saw sizes from 5/8 in to 6 in in diameter.
Why does my hole saw smoke?
Heat from friction. The listings advise applying water or coolant when drilling metals, reducing feed speed, and letting the saw cool before touching it.
Which pick covers the widest size range?
The Amazon Basics kit covers six saws from 25/32 in to 2-11/16 in. The two singles are both 3 in only, so the kit is the range pick of the three.
Related: cobalt vs bi-metal hole saw, step drill bit vs hole saw for sheet metal, annular cutter vs hole saw, best hole saw for sheet metal, best hole saw for metal, bi-metal vs carbide hole saw and best hole saw under 30.
Scoring, line by line
Each saw is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Performance here means stated tooth build and size coverage; build means stated materials and finish; value means what ships in the box for the format. None of these listings states a safety certification or a warranty term with a concrete time frame, so safety and warranty scored zero across the board. A spec the listing does not publish scores nothing.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VIKITON 3 In Saw | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Diablo DHS3000 | 9.6 | 30 | 21 | 19 | n/a | 0 |
| Amazon Basics 9-Pc | 9.6 | 29 | 20 | 21 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.




