Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Parts Washer Ultrasonic: What to Look For Before Buying

An ultrasonic parts washer cleans threads, bores and blind holes that hand scrubbing misses. How tank size, power, heat and basket fit decide which of these three machines suits the parts on the bench.

Parts Washer Ultrasonic: What to Look For Before Buying
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR 15L Ultrasonic CleanerVEVOR 15L Ultrasonic Cleaner9.6/10View on Amazon
  2. 2VEVOR 6L Ultrasonic CleanerVEVOR 6L Ultrasonic Cleaner9.6/10View on Amazon
  3. 3CREWORKS 30L Digital Ultrasonic Cleaning MachineCREWORKS 30L Digital Ultrasonic Cleaning Machine9.5/10View on Amazon

A greasy carburetor, a set of oily bolts, a wrench crusted with shop grime. Hand scrubbing reaches the flat faces and misses the threads, bores and blind holes where old oil and carbon sit. A parts washer ultrasonic machine cleans those hidden surfaces with sound waves in a tank of cleaning solution, and this guide explains what to match to the parts on the bench.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

VEVOR 15L Ultrasonic Cleaner

VEVOR 15L Ultrasonic Cleaner

VEVOR9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15L ultrasonic cleaner with 360W of ultrasonic power, a 400W heater and a stated UL certification, sized for engine parts and hand tools.

Pros

  • 360W ultrasonic power from 6 transducers at 40kHz
  • 400W heater with a stated range of 0 to 80 degrees Celsius
  • Tank size of 13 x 11.8 x 5.9 inches with a stated maximum workpiece size
  • 304 stainless steel tank with a matching basket included

Cons

  • No warranty term is stated in the listing
  • Weighs 21.4 lb before water, solution and parts go in
  • Maximum workpiece size of 10.6 x 8.7 x 4.1 inches limits full immersion to smaller parts
  • No drain valve is stated, so emptying the tank takes extra care
VEVOR 6L Ultrasonic Cleaner

VEVOR 6L Ultrasonic Cleaner

VEVOR9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6L ultrasonic cleaner with 180W of ultrasonic power and a 200W heater, built for small parts, fasteners and pieces that fit a small tank.

Pros

  • 180W ultrasonic power from 3 transducers at 40kHz
  • 200W heater with a stated range of 0 to 80 degrees Celsius
  • 304 stainless steel tank with a matching basket included
  • Lists a weight of 6.83 lb, the lowest stated weight here

Cons

  • No warranty term is stated in the listing
  • Tank of 12.8 x 6.9 x 5.9 inches limits the parts it takes
  • No drain valve is stated
  • Lowest ultrasonic power of the three machines
CREWORKS 30L Digital Ultrasonic Cleaning Machine

CREWORKS 30L Digital Ultrasonic Cleaning Machine

CREWORKS9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30L ultrasonic cleaner with 600W of ultrasonic power, a 600W heater, inset handles and a built-in drain valve, sized for large machine parts.

Pros

  • 600W ultrasonic power with a 600W heater, the strongest pairing here
  • 30L capacity, the largest tank of the three machines
  • Built-in drain valve simplifies emptying the tank
  • Inset handles and a 304 stainless steel tank and basket

Cons

  • No safety certification is stated in the listing
  • No warranty term is stated in the listing
  • No tank dimensions or maximum workpiece size are stated
  • No weight is stated, so bench load cannot be checked from the listing

How a parts washer ultrasonic cleaner works

An ultrasonic cleaner fills a steel tank with cleaning solution and drives transducers that send high frequency sound through the liquid. The sound forms tiny bubbles that collapse against the part surface and lift grease and carbon from threads, bores and blind holes. The two VEVOR machines in this guide list a frequency of 40kHz, and all three machines pair the sound with a heater and a timer, so heat and time do the soaking while the sound does the scrubbing.

Heat matters because warm solution cuts grease faster than cold solution. The VEVOR machines list a temperature range of 0 to 80 degrees Celsius, while the CREWORKS machine lists 20 to 80 degrees Celsius. A timer matters because cycle length can be matched to the part, short for delicate items and longer for crusted ones, and all three machines list a timer that runs to 30 minutes.

Tank size decides what fits

Tank size is the first limit to check, because a part that does not fit in the tank cannot be fully immersed. The CREWORKS machine (on Amazon) holds 30L, the VEVOR JPS-60A holds 15L, and the VEVOR TH-30A holds 6L. Small fasteners and hand tools fit the smallest tank, while large machine parts suit the largest one.

The 15L VEVOR lists a tank of 13 x 11.8 x 5.9 inches and a maximum workpiece size of 10.6 x 8.7 x 4.1 inches, so the fit of a part can be checked before buying. The 6L VEVOR lists a tank of 12.8 x 6.9 x 5.9 inches. The CREWORKS listing states no tank dimensions or maximum workpiece size, so its 30L capacity is the only size figure to go on.

Power, heat and transducers

The CREWORKS lists 600W of ultrasonic power and a 600W heater. The 15L VEVOR lists 360W of ultrasonic power from 6 transducers and a 400W heater. The 6L VEVOR lists 180W of ultrasonic power from 3 transducers and a 200W heater. More transducers spread the sound across the tank.

All three machines use a 304 stainless steel tank with a matching basket to hold small parts in place. The VEVOR listings state FCC, CE, RoHS and UL certification, while the CREWORKS listing states no safety certification, a gap to weigh against its size and power.

The three cleaners side by side

Pick Tank size Ultrasonic power Heater power
VEVOR 15L 15L 360W 400W
VEVOR 6L 6L 180W 200W
CREWORKS 30L 30L 600W 600W

The 15L VEVOR pairs a mid-size tank with the most complete set of stated figures. The 6L VEVOR is the small tank pick for fasteners and small tools. The CREWORKS 30L is the large tank pick, with the most power and a drain valve, but the least stated detail.

Parts washer ultrasonic picks for the shop

Cleaning engine parts, tools and hardware starts with matching the tank and the power to the dirtiest part on the bench. The three machines below cover small, mid-size and large tanks, and each one lists a heater, a timer and a basket.

FAQ for welders

What size ultrasonic cleaner do I need for engine parts?

Match the tank to the largest part that has to go in. The 6L VEVOR suits fasteners and small tools that fit a tank of 12.8 x 6.9 x 5.9 inches. The 15L VEVOR lists a maximum workpiece size of 10.6 x 8.7 x 4.1 inches, which covers many engine parts. The 30L CREWORKS is the pick for large machine parts, though its listing states no tank dimensions or maximum workpiece size.

Does the heater matter in an ultrasonic parts washer?

Yes, because warm solution cuts grease faster than cold solution. The VEVOR machines list a temperature range of 0 to 80 degrees Celsius, and the CREWORKS machine lists 20 to 80 degrees Celsius. Set the temperature on the digital panel, and follow the machine manual for the parts being cleaned.

Can an ultrasonic cleaner damage parts?

The VEVOR listings state that the cleaning leaves items without damage, and both VEVOR machines use a 304 stainless steel tank with a basket to hold parts in place. All three timers run to 30 minutes, so a short cycle can be set for delicate items. Check the manual for parts that should not go in an ultrasonic tank.

What goes in the basket, and what stays out?

The baskets hold small parts in place during cleaning, and the listings name wrenches, screwdrivers, watches, jewelry, circuit boards and machine parts among the uses. Parts that cannot be fully immersed, or that the manual says to keep out, stay out.

How long does a cleaning cycle take?

All three machines list a timer that runs to 30 minutes: the VEVOR machines list 0 to 30 minutes, and the CREWORKS machine lists up to 30 minutes. Set the time on the digital control panel.

Related: best high temp spray paint for metal, best auto body hammer and dolly set, and the metal fab tools hub.

More buying guides

Metal Fab Tools ·

Ultrasonic Parts Cleaner Solution Guide

An ultrasonic parts cleaner solution lifts grease, varnish and dirt off metal parts in the tank, and the right one matches the metal and…