Best Band Saw Blade Under $35 (2026)
Three band saw blades under $35 for metal cutting in home and farm shops, compared on length, tooth count, material, fit and pack size.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallFOXBC 44-7/8 Inch Bandsaw Blades9.6/10View on Amazon - 2
Best Portable 27FOXBC 27 Inch Bandsaw Blades9.6/10View on Amazon - 3
Finest TeethBosch BS6412-24M Band Saw Blade9.6/10View on Amazon
A clean cut starts with the right tooth count and the right blade length for the saw on the bench. When a portable saw chews through angle iron, a stationary saw squares a bar, or a small benchtop saw trims thin stock, the blade decides how fast the cut goes and how clean the edge stays. This guide covers the best band saw blade under 35 for metal cutting in home, farm and small fabrication shops, comparing length, tooth count, material and pack size.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall FOXBC 44-7/8 Inch Bandsaw Blades: Bi-Metal M42, 18 TPI, 3 pack, and the widest portable saw fit list here. Check price on Amazon
- Best Portable 27 FOXBC 27 Inch Bandsaw Blades: Hook teeth, 18 TPI, and stated thickness guidance for compact and sub-compact portable saws. Check price on Amazon
- Finest Teeth Bosch BS6412-24M Band Saw Blade: 24 TPI metal cutting blade for stationary saws, in premium grade steel. Check price on Amazon
The machines

FOXBC 44-7/8-inch Bandsaw Blades 18 TPI
A 3 pack of 44-7/8 inch bi-metal M42 blades with 18 TPI, a 1/2 inch width and a stated cutting range of 5/16 inch to 1/2 inch thick material.
Pros
- Bi-Metal M42 high speed steel with heat resistance
- Precision machined teeth for clean cuts
- Fits Milwaukee M18 FUEL and corded saws plus DeWalt, Bosch, Makita and Wen models
- 3 pack covers repeat blade changes
Cons
- No warranty term is stated
- No safety certification is stated
- Portable saws only: no stationary saw fit is stated
- Only sold as a 3 pack, no single blade stated

FOXBC 27 Inch Bandsaw Blades 18 TPI for DeWalt
A 3 pack of 27 inch bi-metal M42 blades with 18 TPI, a hook tooth profile and stated thickness guidance for common and very hard materials.
Pros
- Bi-Metal M42 high speed steel with heat resistance and weld design
- Hook teeth profile with precision-sharpened teeth
- Stated thickness guidance: 5/32 to 3/16 inch common, 3/16 to 5/16 inch very hard
- Fits DeWalt compact saws and Milwaukee M12 sub-compact saws
Cons
- No warranty term is stated
- No safety certification is stated
- Short 27 inch length fits only compact and sub-compact portable saws

Bosch BS6412-24M 64-1/2 In. 24 TPI Metal Cutting
A single 64-1/2 inch metal cutting blade with 24 TPI, premium grade steel and a 1/2 inch width for stationary band saws.
Pros
- Finest tooth count here at 24 TPI
- Premium grade steel with heat buildup resistance
- 64-1/2 inch length fits most common band saw sizes, per the listing
- Metal cutting blade for stationary saws
Cons
- Single blade only, no multi-pack stated
- No thickness range is stated for cutting
- No warranty term is stated
- No safety certification is stated
Other welders and gear to compare
FOXBC 35-3/8 Inch Bandsaw Blade 24 TPI for MilwaukeeCheck price on Amazon
DEWALT Portable Band Saw BladeCheck price on Amazon
Morse Master Cobalt Bi-Metal Portable Band Saw Blade 44 7/8 xCheck price on Amazon
FOXBC 35-3/8 Inch Bandsaw Blade 18 TPI for MilwaukeeCheck price on Amazon
Starrett Duratec SFB Band Saw BladeCheck price on Amazon
FOXBC 32-7/8 Inch Bandsaw Blade 18 TPI for DeWalt DCS371BCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Length | Width | Teeth | Material | Pack |
|---|---|---|---|---|---|---|
| FOXBC 44-7/8 Inch Bandsaw Blades | 9.6/10 | 44-7/8 in | 1/2 in | 18 TPI | Bi-Metal M42 | 3 pack |
| FOXBC 27 Inch Bandsaw Blades | 9.6/10 | 27 in | 0.5 in | 18 TPI | Bi-Metal M42 | 3 pack |
| Bosch BS6412-24M Band Saw Blade | 9.6/10 | 64-1/2 in | 1/2 in | 24 TPI | Premium grade steel | 1 blade |
All specs here repeat what the maker rates and the listing prints, copied down 28 October 2026. Where a listing states a figure two ways, the table shows both.
Buying guide: what matters in the best band saw blade under 35
Tooth count and material thickness
Tooth count runs 24 TPI on the Bosch and 18 TPI on both FOXBC blades. The FOXBC 27 inch blade states thickness guidance: common materials 5/32 inch to 3/16 inch thick, and very hard materials 3/16 inch to 5/16 inch thick. The FOXBC 44-7/8 inch blade states cutting from 5/16 inch to 1/2 inch thick. The Bosch listing states no thickness range for metal, so match that blade to the saw and the stock by tooth count alone.
Blade length and saw fit
Length decides fit before anything else. The Bosch at 64-1/2 inches suits stationary saws, with lengths stated to fit most common band saw sizes. The FOXBC 27 inch blade fits DeWalt compact saws and the Milwaukee M12 sub-compact saw. The FOXBC 44-7/8 inch blade fits Milwaukee M18 FUEL and corded saws plus DeWalt, Bosch, Makita and Wen models.
Bi-metal M42 and premium grade steel
Both FOXBC blades state Bi-Metal M42 high speed steel with heat resistance and a weld design for extended blade life. The Bosch states premium grade steel with heat buildup resistance for long life. Bi-metal M42 is the stronger stated case for metal cutting here.
Pack size and single blades
Two picks ship as a 3 pack, and the Bosch ships as a single blade. A 3 pack covers repeat blade changes without a second order, which matters where blades wear on hard stock. A single blade suits a saw that runs one length and one tooth count all year. Pack size does not change the cut, but it changes how soon a dull blade gets swapped.
Metal cutting first
Match the blade to the material the listing names. The Bosch listing names metal cutting first, with compatible materials of Metal and Wood. Both FOXBC listings name Metal as the compatible material. On a metal job, match the blade to the material being cut most.
Before You Strike an Arc
- Match blade length to the saw: the listings state 64-1/2 inches, 27 inches and 44-7/8 inches.
- Match tooth count to stock thickness using the stated ranges: 5/32 inch to 3/16 inch, 3/16 inch to 5/16 inch, and 5/16 inch to 1/2 inch.
- Check width and thickness against the saw: widths of 1/2 inch and 0.5 inch, and thickness figures of 0.020 inch and 0.02 inches are stated.
- Check the weld point on arrival, since the FOXBC listings claim a weld design.
- Confirm the pack contents on arrival: three blades in the 3 packs, and one blade with the Bosch.
FAQ for welders
What tooth count suits thin metal?
Finer teeth suit thinner stock. The Bosch at 24 TPI is the finest tooth count here, and the FOXBC blades at 18 TPI state thickness guidance from 5/32 inch up to 1/2 inch.
How do I match a blade to my portable band saw?
Match the stated length and the named saw models. The 27 inch FOXBC blade names DeWalt compact saws and the Milwaukee M12 sub-compact saw. The 44-7/8 inch FOXBC blade names Milwaukee M18 FUEL and corded saws plus DeWalt, Bosch, Makita and Wen models. Measure the old blade and check the model list before ordering.
What is the difference between bi-metal M42 and premium grade steel blades?
Bi-metal M42 blades pair a high speed steel tooth edge with a backing built for heat resistance, which is the claim on both FOXBC listings. The Bosch listing states premium grade steel without naming a bi-metal construction.
Can one blade cut wood and metal?
Some listings claim both. The Bosch listing names metal cutting first, with compatible materials of Metal and Wood. Both FOXBC listings name Metal as the compatible material, so match the blade to the material being cut most.
How many blades come in a pack?
Two picks ship as a 3 pack: both FOXBC blades. The Bosch ships as a single blade, with a single item count and one blade in the box. Pack size is stated in each listing’s set name and item count.
Related: best band saw blade for metal, best portable band saw for metal, bi-metal vs carbide band saw blade, and the metal fab tools hub.
Scoring, line by line
Each blade is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| FOXBC 44-7/8 Inch Bandsaw Blades | 9.6 | 30 | 21 | 21 | n/a | 0 |
| FOXBC 27 Inch Bandsaw Blades | 9.6 | 29 | 21 | 21 | n/a | 0 |
| Bosch BS6412-24M Band Saw Blade | 9.6 | 28 | 21 | 19 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




