Best End Mill Set (2026)
Five end mill sets for the home shop compared: piece count, size range, flutes, coating and material, from what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallACCUSIZE 20PC TIN METRIC9.7/10View on Amazon - 2
Best CarbideSISONA 5PC CARBIDE9.6/10View on Amazon - 3
Best 20-Piece InchALL INDUSTRIAL 20PC TIN9.7/10View on Amazon - 4
Best 8-PieceAUTOTOOLHOME 8PC HSS9.6/10View on Amazon - 5
Best 10-Piece MetricASNOMY 10PC HSS METRIC9.6/10View on Amazon
The plate is clamped in the vise, the edge needs a clean shoulder, and the wrong cutter chatters and burns its way through the pass. The best end mill set for a home shop covers the sizes you reach for, in a material and coating that suit your machine. This guide compares five end mill sets on what each listing states: piece count, size range, flutes, coating and material.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.
Quick picks
- Best Overall ACCUSIZE 20PC TIN METRIC: 20 pieces, TiN coated high speed steel, 3 to 20 mm, mixing 2 and 4 flute. Check price on Amazon
- Best Carbide SISONA 5PC CARBIDE: 5 pieces of solid tungsten carbide, TiN coated, 1/8 to 3/8 in, 4 flute flat end. Check price on Amazon
- Best 20-Piece Inch ALL INDUSTRIAL 20PC TIN: 20 pieces, TiN coated high speed steel, 3/16 to 3/4 in, 2 and 4 flute, center cutting. Check price on Amazon
- Best 8-Piece AUTOTOOLHOME 8PC HSS: 8 pieces of M2 high speed steel, 1/16 to 1/2 in, 4 flute straight shank. Check price on Amazon
- Best 10-Piece Metric ASNOMY 10PC HSS METRIC: 10 pieces of high speed steel, 2 to 12 mm, 4 flute straight shank. Check price on Amazon
The machines

Accusize Industrial Tools 20 Pc H.S.S. Tin Coated
A 20 piece metric end mill set in TiN coated high speed steel, cutting diameters from 3 mm to 20 mm, mixing 2 flute and 4 flute cutters, model 1810-0104.
Pros
- 20 pieces, the widest metric range here, 3 to 20 mm
- TiN coated high speed steel
- Mix of 2 flute and 4 flute cutters
- Straight shank, metric system
Cons
- No warranty term is stated
- No safety listing is stated
- Bullets are thin, most detail is in the title
- No timed or performance figure is stated

End Mill Set, 20 Pieces 2 & 4 Flute
A 20 piece inch end mill set in TiN coated high speed steel, 3/16 to 3/4 in by 16ths, mixing 2 flute and 4 flute cutters, ground from solid and center cutting.
Pros
- 20 pieces, 3/16 to 3/4 in by 16ths
- TiN coated for long life, per the listing
- Mix of 2 flute and 4 flute, center cutting
- Ground from solid, per the listing
Cons
- No warranty term is stated
- No safety listing is stated
- 3.6 lb box is the heaviest here
- No timed or performance figure is stated

1/8" 3/16" 1/4" 5/16" 3/8" Carbide End Mills Set
A 5 piece set of solid tungsten carbide end mills, TiN coated, 1/8 to 3/8 in, 4 flute flat end, listed for carbon steel, alloy steel, hardened steel and cast iron.
Pros
- Solid tungsten carbide with cobalt
- TiN coating for heat resistance and less wear, per the listing
- 4 flute flat end, square nose
- Listed for hardened steel and cast iron
Cons
- Only 5 pieces, the fewest here
- No warranty term is stated

10Pcs 4-Flute End Mill Set
A 10 piece metric end mill set in high speed steel, with 10 diameter sizes from 2 mm to 12 mm, 4 flute straight shank, for aluminium, cast iron, copper, plastics and wood.
Pros
- 10 diameter sizes from 2 mm to 12 mm
- High speed steel with high abrasion resistance
- 4 flute straight shank for profiling, shoulder milling and finishing
- Suits aluminium, cast iron, copper, plastics and wood
Cons
- No warranty term is stated
- No flute length or shank diameter is stated
- Metric range tops out at 12 mm, below the 20 mm top of the Accusize set
- Finish is listed only as titanium, with no TiN coating claim

8PCS HSS 4-Flute End Mill Set CNC Milling Bits
An 8 piece set of M2 high speed steel end mills, 1/16 to 1/2 in, 4 flute straight shank, listed for milling, slotting and profiling in metal and wood.
Pros
- M2 high speed steel, 8 common sizes from 1/16 to 1/2 in
- 4 flute, straight shank for solid clamping
- Listed for carbon steel, tool steel, cast iron, titanium and aluminum
- 30 degree helix angle, per the spec table
Cons
- Cutting length 0.75 in against flute length 1 in in the table
- No warranty term is stated
Other welders and gear to compare
Accusize 3 Pc Little Hogger SetCheck price on Amazon
3/16" inch Cobalt Double Ends Drill Bits SetCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Pieces | Sizes | Flutes | Coating | Material | Warranty |
|---|---|---|---|---|---|---|---|
| ACCUSIZE 20PC TIN METRIC | 9.7/10 | 20 | 3 to 20 mm | 2 and 4 flute | TiN | High speed steel | None stated |
| ALL INDUSTRIAL 20PC TIN | 9.7/10 | 20 | 3/16 to 3/4 in | 2 and 4 flute | TiN | High speed steel | None stated |
| SISONA 5PC CARBIDE | 9.6/10 | 5 | 1/8 to 3/8 in | 4 flute | TiN | Solid tungsten carbide | None stated |
| ASNOMY 10PC HSS METRIC | 9.6/10 | 10 | 2 to 12 mm | 4 flute | Titanium | High speed steel | None stated |
| AUTOTOOLHOME 8PC HSS | 9.6/10 | 8 | 1/16 to 1/2 in | 4 flute | Unfinished | M2 high speed steel | None stated |
Ratings in this table are the makers’ own claims taken from each product page (22 October 2026). Where a listing contradicts itself, both figures are shown.
What the listings tell you
We read five end mill set listings. Piece counts run 5, 8, 10, 20 and 20. Four sets are high speed steel and one, the sisona, is solid tungsten carbide. TiN coating is stated on three listings, one is unfinished, and one lists a titanium finish. Two sets mix 2 flute and 4 flute cutters; the other three are 4 flute throughout. One listing contradicts its own spec table: the AUTOTOOLHOME table says carbide and 55 HRC against M2 high speed steel and HRC 30 in the title and bullets. Trust the titles and bullets over the tables. The AUTOTOOLHOME listing names carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium and aluminum among its materials, and the sisona listing names carbon steel, alloy steel, hardened steel and cast iron. The ASNOMY listing names aluminium, cast iron, copper, plastics and wood. The All Industrial set carries part number ALL-11942-fba and model LMS1244, and the Accusize set carries model 1810-0104. The AUTOTOOLHOME set weighs 6.72 oz, and the All Industrial box weighs 3.6 lb, and the ASNOMY set weighs 0.27 kg. The sisona listing also contradicts itself on the item count and the coating name, both noted in its review below.
Buying guide: best end mill set for the home shop
HSS vs carbide
Four sets here are high speed steel: the AUTOTOOLHOME in M2, the Accusize, the All Industrial and the ASNOMY. One set, the sisona, is solid tungsten carbide with cobalt, TiN coated, listed for steel including carbon steel, alloy steel, hardened steel and cast iron. Carbide holds an edge longer in hard material. HSS forgives more in a light machine or a shaky setup. The sisona listing also claims a good surface finish in steel, stated as the maker’s own result, not a figure you can check before you buy. The AUTOTOOLHOME listing states its M2 steel suits machining metal materials with hardness of HRC 30 or higher, and its 4 flute configuration allows for faster feed rates and improved chip removal, per the listing. The All Industrial set is ground from solid and center cutting, per the listing. The AUTOTOOLHOME bullets list milling, slotting and profiling, with side milling, end milling and finish machining among the uses.
Flutes and coatings
Three sets are 4 flute throughout. The Accusize and All Industrial sets mix 2 flute and 4 flute cutters, which covers both slotting and finishing in one box. On coating, three listings state TiN: Accusize, All Industrial and sisona. The AUTOTOOLHOME is unfinished, and the ASNOMY lists a titanium finish. The All Industrial listing says its titanium coating is for long life, and the sisona listing says its TiN surface improves heat resistance and reduces wear. The AUTOTOOLHOME set lists 8 common sizes from 1/16 to 1/2 in, and the sisona set lists cutting lengths from 3/8 to 1 in with overall lengths from 1-1/2 to 2-1/2 in. The sisona set lists a flat end with a square nose, and the All Industrial set lists center cutting.
Inch vs metric
Buy the system your machine speaks. The AUTOTOOLHOME runs 1/16 to 1/2 in, the sisona 1/8 to 3/8 in, and the All Industrial 3/16 to 3/4 in. The Accusize runs 3 to 20 mm and the ASNOMY runs 2 to 12 mm. Match the sizes to your collets and your DRO before you order; a set in the wrong system is a box of paperweights. The sisona listing notes its bits are compatible with most desktop CNC machines and industrial CNC machines, with the correct-sized collet for your device.
Piece count and range
Piece counts here are 5, 8, 10, 20 and 20. The two 20 piece sets cover the widest ranges: 3 to 20 mm for the Accusize and 3/16 to 3/4 in for the All Industrial. More pieces means fewer single cutters to buy later, but a 5 piece carbide set beats a 20 piece HSS set if the work is hard steel. Note what the counts cover: the 20 piece sets include both 2 and 4 flute cutters, while the 5, 8 and 10 piece sets are 4 flute only. The AUTOTOOLHOME set lists a straight shank for clamping in CNC routers, milling machines and drill presses, and the All Industrial set lists a range of 3/16 to 3/4 in by 16ths. The sisona set lists shank diameters from 1/8 to 3/8 in to match its cutting diameters.
Before You Strike an Arc
- Match the shank to your collets before you order; these sets list straight shanks.
- Check the flute count and coating against the order when the box lands; two sets here mix 2 and 4 flute.
- Inspect each cutter for chipped edges on arrival; a chipped flute only gets worse in the cut.
- The AUTOTOOLHOME listing contradicts its own spec table; confirm sizes against the title, not the table.
FAQ for welders
What is an end mill?
An end mill is a rotary cutter for milling, slotting, profiling and finishing in a mill or CNC machine. Unlike a drill bit, it cuts on its sides as well as its end.
How do I choose end mill size?
Match the cutter to the slot or shoulder you need to cut. The sets here run from 1/16 in to 3/4 in and 2 mm to 20 mm, so pick the set whose range covers your common work.
Can I use an end mill in a drill press?
The AUTOTOOLHOME listing names drill presses among the compatible equipment for its straight shank cutters. The other listings name mills, CNC machines and routers.
How long do end mills last?
No listing here states tool life. Two listings point to coating for life: the All Industrial says its titanium coating is for long life, and the sisona says its TiN surface reduces wear.
What does a TiN coating do?
The sisona listing says its TiN surface improves heat resistance and reduces wear. Three of the five sets here state TiN coating.
What materials can these sets cut?
The AUTOTOOLHOME listing names carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium and aluminum. The sisona listing names carbon steel, alloy steel, hardened steel and cast iron.
Related: the drill press vs mill comparison, the best drill press for metalworking, the best cutting fluid for metal, the cobalt vs HSS drill bits for steel comparison and our metal fab tools hub.
Scoring, line by line
Each set is scored on a fixed scale for performance, build, value, safety and warranty. End mills carry no safety listing to state, so every set here scores zero on safety. No listing states a warranty term, so every set scores zero on warranty too. The ranking comes from the other three.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ACCUSIZE 20PC TIN METRIC | 9.7 | 32 | 22 | 21 | n/a | 0 |
| ALL INDUSTRIAL 20PC TIN | 9.7 | 30 | 22 | 21 | n/a | 0 |
| SISONA 5PC CARBIDE | 9.6 | 32 | 22 | 19 | n/a | 0 |
| ASNOMY 10PC HSS METRIC | 9.6 | 30 | 20 | 21 | n/a | 0 |
| AUTOTOOLHOME 8PC HSS | 9.6 | 29 | 20 | 21 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.




