Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Tabletop End Mill (2026): 5 Picks Compared

5 tabletop end mills compared by flute count, material, coating, shank and size, for tabletop mills and CNC work in a home shop.

Best Tabletop End Mill (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1WEXWE DLC Carbide End MillBest OverallWEXWE DLC Carbide End Mill9.7/10View on Amazon
  2. 2Hunricho 8-Piece End Mill SetBest SetHunricho 8-Piece End Mill Set9.7/10View on Amazon
  3. 3HHIP 5802-0750 End MillBest for SteelHHIP 5802-0750 End Mill9.6/10View on Amazon
  4. 4HHIP 5801-0501 End MillBest for AluminumHHIP 5801-0501 End Mill9.6/10View on Amazon
  5. 5LU&MN Carbide End MillSmallest DiameterLU&MN Carbide End Mill9.5/10View on Amazon

A small steel bracket needs a slot milled to size, and the cutter on the bench has to hold an edge through the cut. The best tabletop end mill for that job is the cutter whose flute count, material and coating match the metal on the table. This guide compares end mills by flute count, material, coating, shank and size, using only what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall WEXWE DLC Carbide End Mill: DLC coating at HV7000, HRC62 carbide, 3 flutes for aluminum and copper alloys Check price on Amazon
  • Best Set Hunricho 8-Piece End Mill Set: 8 metric sizes from 2 to 12 mm in a carbide set for CNC work Check price on Amazon
  • Best for Steel HHIP 5802-0750 End Mill: 3/4 in HSS mill with a Weldon shank for steel and stainless steel Check price on Amazon
  • Best for Aluminum HHIP 5801-0501 End Mill: 1/2 in HSS mill with 2 flutes for chip clearance in aluminum Check price on Amazon
  • Smallest Diameter LU&MN Carbide End Mill: 1/16 in carbide mill in a 2-piece set for precision work Check price on Amazon

The machines

WEXWE Tools DLC Series Carbide Square End Mill

WEXWE Tools DLC Series Carbide Square End Mill

WEXWE9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece DLC-coated carbide end mill with a 3-flute design, a 1/4 in shank and HRC62 tungsten carbide for aluminum, copper and magnesium alloys.

Pros

  • Diamond-like coating with HV7000 surface hardness stated
  • HRC62 ultrafine grain tungsten carbide for wear resistance
  • Low friction of 0.08 to 0.15 stated for adhesion resistance
  • 3-flute design with a U groove for sharper cutting

Cons

  • No warranty term is stated in the listing
  • No cutting diameter is stated, only a 1/4 in shank
  • No cutting length or overall length is stated
  • Only 2 pieces in the pack
8pcs 2-12mm CNC Square Nose End Mills,Carbide

8pcs 2-12mm CNC Square Nose End Mills,Carbide

Hunricho9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-piece carbide end mill set in sizes from 2 mm to 12 mm, with 4 flutes and a straight shank, for CNC and metal work.

Pros

  • 8 diameter sizes from 2 mm to 12 mm in a single set
  • Tungsten carbide with cobalt for wear and heat resistance
  • Large chip flute design for smoother chip removal
  • Stated for CNC machining, metal processing and engineering

Cons

  • No warranty term is stated in the listing
  • No shank size is stated, only a straight shank
  • No cutting length or overall length is stated
  • Metric sizes only, with no inch sizes stated
HHIP 5802-0750 3/4 X 1/2 4 Flute HSS Single END

HHIP 5802-0750 3/4 X 1/2 4 Flute HSS Single END

HHIP9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A HSS single-end center-cut end mill with a 3/4 in cutting diameter, a 1/2 in Weldon shank and 4 flutes for steel and stainless steel.

Pros

  • 3/4 in cutting diameter with a 1-5/8 in cutting length
  • 1/2 in Weldon shank with a flat for a firm fit
  • Center-cut design for plunge cutting, slotting and pocketing
  • 4-flute geometry for steel, stainless steel and harder materials

Cons

  • No warranty term is stated in the listing
  • Single piece only, with no pack option stated
  • HSS, not carbide, for heat resistance
  • No stated use for aluminum or softer materials
HHIP 5801-0501 1/2 X 1/2 2 Flute HSS Single End

HHIP 5801-0501 1/2 X 1/2 2 Flute HSS Single End

HHIP9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A HSS single-end center-cut end mill with a 1/2 in cutting diameter, a 1/2 in Weldon shank and 2 flutes for aluminum, brass and plastics.

Pros

  • 1/2 in cutting diameter with a 1 in cutting length
  • 1/2 in Weldon shank with a flat for a firm fit
  • Center-cut design for plunge cutting, slotting and pocketing
  • 2-flute geometry for chip clearance in softer materials

Cons

  • No warranty term is stated in the listing
  • Single piece only, with no pack option stated
  • HSS, not carbide, for heat resistance
  • No stated use for steel or harder materials
LU&MN Carbide Square End Mill, 4 Flute, 1/16"

LU&MN Carbide Square End Mill, 4 Flute, 1/16"

LU&MN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece carbide square end mill with a 4-flute design and a 1/16 in diameter for precision cutting in alloy steels and hardened steel.

Pros

  • Carbide build for durability, heat resistance and sharpness
  • 4-flute design for chip removal and smoother finishes
  • Stated for alloy steels, hardened steel, metal and composites
  • 2 pieces included in the pack

Cons

  • No warranty term is stated in the listing
  • No shank size is stated
  • No cutting length or overall length is stated
  • 1/16 in is the smallest diameter in this guide

Other welders and gear to compare

Spec sheet comparison

End Mill Gear Score Diameter Flutes Material Shank Pack
WEXWE DLC Carbide End Mill 9.7/10 Not stated 3 Carbide, DLC 1/4 in 2 pieces
Hunricho 8-Piece End Mill Set 9.7/10 2 to 12 mm 4 Tungsten carbide Not stated 8 pieces
HHIP 5802-0750 End Mill 9.6/10 3/4 in 4 HSS 1/2 in Weldon 1 piece
HHIP 5801-0501 End Mill 9.6/10 1/2 in 2 HSS 1/2 in Weldon 1 piece
LU&MN Carbide End Mill 9.5/10 1/16 in 4 Carbide Not stated 2 pieces

All specs here repeat what the maker rates and the listing prints, copied down 11 November 2026. None of the 5 state a warranty term or a safety certification.

Buying guide: choosing the best tabletop end mill

Flute count and the metal

Flute count is the number to check, and it decides how the cutter clears chips and how smooth the finish runs. The 2-flute HHIP mill is built for chip clearance in softer materials: aluminum, brass and plastics, with superior chip evacuation stated. The 4-flute mills suit harder materials: the HHIP 4-flute is particularly effective for steel and stainless steel, and the LU&MN 4-flute is stated for alloy steels and hardened steel. The WEXWE sits between them at 3 flutes, for aluminum, copper, magnesium alloys, high silicon aluminum and composite materials. Pick the flute count from the metal: 2 flutes for soft metal and plastic, 4 flutes for steel, and 3 flutes for the alloys the WEXWE lists. For more on aluminum, see the best end mill bit for cutting aluminum.

Carbide or HSS

Carbide and HSS are the materials here, and they behave differently at the cut. Carbide holds hardness and heat resistance: the WEXWE states HRC62 tungsten carbide, the Hunricho states stronger heat resistance than HSS, and the LU&MN states durability, heat resistance and long-lasting sharpness. HSS is known for wear resistance and longevity, per the HHIP listings, and the HHIP mills are HSS. Carbide suits hard metal and long runs; HSS suits general milling where toughness matters more than hardness. For a closer look, see carbide vs HSS end mill.

Diameter and shank

Diameter decides the width of the cut, and shank decides what collet or holder the mill fits. The diameters here run from 1/16 in on the LU&MN to 3/4 in on the HHIP 5802, with the HHIP 5801 at 1/2 in and the Hunricho set covering 2 to 12 mm. The shanks stated are 1/4 in on the WEXWE and 1/2 in Weldon on the HHIP mills, with a flat for a firm fit; the LU&MN and the Hunricho set state no shank size. Check the collet accepts the shank before ordering, and check the cutting diameter against the slot or pocket. For CNC work, see the best 1/4 inch end mill for CNC.

Coating and hardness

Only the WEXWE states a coating: a diamond-like coating with a surface hardness of HV7000 and a friction coefficient of 0.08 to 0.15, with strong adhesion resistance stated. The HRC62 ultrafine grain tungsten carbide underneath states toughness, hardness and wear resistance. The other mills state no coating: the HHIP mills are plain HSS, the LU&MN is plain carbide, and the Hunricho set is tungsten carbide. The coating is the WEXWE’s edge; the other mills rely on the base material alone.

Sets or singles

The Hunricho set covers 8 sizes in a single buy, from 2 mm to 12 mm, for a shop that mills a range of small parts. The LU&MN and the WEXWE come as 2-piece sets, and the HHIP mills are single pieces. A set suits a shop that is still finding its sizes; a single suits a shop that knows the diameter it needs. Count the pieces on arrival: the set states 8, the 2-piece sets state 2, and the HHIP mills state 1 each.

Use as directed. Milling throws hot chips, so wear eye protection and keep hands clear of the cutter while the spindle turns. Clamp the work down before cutting, check the cutter is seated in the collet or holder, and keep the work area clear of anything that can catch a chip. Never exceed the speeds and feeds the machine and cutter maker state for the material.

Before You Strike an Arc

  • Check the shank size against the collet or holder: the HHIP mills state a 1/2 in Weldon shank, and the WEXWE states a 1/4 in shank.
  • Check the cutting diameter against the slot or pocket: the HHIP mills state 3/4 in and 1/2 in, and the LU&MN states 1/16 in.
  • Match the flute count to the metal: 2 flutes for aluminum, brass and plastics, 4 flutes for steel and stainless steel.
  • Count the pieces on arrival: the Hunricho set states 8 pieces, the LU&MN and WEXWE state 2 pieces each, and the HHIP mills state 1 piece each.

FAQ for welders

What is the difference between a 2-flute and a 4-flute end mill?

The 2-flute HHIP mill is built for chip clearance in softer materials: aluminum, brass and plastics, with superior chip evacuation stated. The 4-flute mills give more cutting edge engagement and a smoother finish, and the HHIP 4-flute is particularly effective for steel, stainless steel and harder materials. For hardened steel, see the best end mill for cutting hardened steel.

Should I buy carbide or HSS end mills?

Carbide holds hardness and heat resistance: the WEXWE states HRC62 tungsten carbide with a DLC coating, and the Hunricho states stronger heat resistance than HSS. HSS is known for wear resistance and longevity, per the HHIP listings. For more on HSS, see the best high speed steel end mill.

What size end mill do I need for a tabletop mill?

It depends on the cut: the LU&MN states 1/16 in for fine precision work, the HHIP mills state 1/2 in and 3/4 in for larger cuts, and the Hunricho set covers 2 to 12 mm. Check the shank fits the collet: the WEXWE states a 1/4 in shank and the HHIP mills state a 1/2 in Weldon shank.

What does the DLC coating on the WEXWE do?

The diamond-like coating states a surface hardness of HV7000 and a friction coefficient of 0.08 to 0.15, with strong adhesion resistance. The HRC62 ultrafine grain tungsten carbide underneath states toughness, hardness and wear resistance. The listing states the mill is for aluminum, copper, magnesium alloys, high silicon aluminum and composite materials.

Can I use these end mills on a CNC router?

The Hunricho set states it is for CNC machining, metal processing and engineering, and the listing also calls the cutters router bits. The WEXWE and LU&MN state no CNC use, and the HHIP mills state general milling. Check the shank fits the router collet before ordering.

Related: best end mill set, best end mill bit for cutting aluminum, carbide vs HSS end mill, and the metal fab tools hub.

Scoring, line by line

Each end mill is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. End mills carry no safety certification to state, so no end mill here earns safety or warranty points; the ranking comes from performance, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
WEXWE DLC Carbide End Mill 9.7 32 22 21 n/a 0
Hunricho 8-Piece End Mill Set 9.7 30 21 22 n/a 0
HHIP 5802-0750 End Mill 9.6 30 21 20 n/a 0
HHIP 5801-0501 End Mill 9.6 29 21 20 n/a 0
LU&MN Carbide End Mill 9.5 28 20 19 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides

Metal Fab Tools ·

End Mill Types Explained for Metalworking

End mill types differ by nose shape, flute count, shank and coating, and the right type follows the cut: flat bottoms, round pockets, or…

Metal Fab Tools ·

End Mill Sizes: Diameter and Shank Chart

End mill sizes run from 1/8 inch to 3/4 inch in the sets here, and this guide maps cutting diameters, shank sizes, cut lengths…