Best Emery Cloth Roll (2026)
Rolls for metal, wood and plastic compared by stated grit range, roll size, backing and dispenser, from 6-grit assortment boxes to long one-grit rolls.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPukamam 6-Grit Roll Set9.6/10View on Amazon - 2
Best Labeled SetHL-YMXQ 6-Grit Roll Set9.6/10View on Amazon - 3
Best Long RollsBates 6-Grit Roll Set9.6/10View on Amazon - 4
Best Long RollShineboc 120 Grit Roll9.5/10View on Amazon - 5
Best Fine Grit RollNewkita 600 Grit Roll9.4/10View on Amazon
Rust on a weldment, a rough edge on a cut, a coat that needs keying before paint: all of it comes down to hand sanding at the bench. The best emery cloth roll matches the grit to the job and holds up wet or dry without tearing. This list compares rolls by stated grit range, roll size, backing and dispenser, so the roll fits the work.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Pukamam 6-Grit Roll Set: 6 grits from 80 to 600 grit with a nylon backing and dispenser Check price on Amazon
- Best Labeled Set HL-YMXQ 6-Grit Roll Set: 6 grits with a dispenser labeled by size Check price on Amazon
- Best Long Rolls Bates 6-Grit Roll Set: 6 grits at 20 feet per roll with a dispenser Check price on Amazon
- Best Long Roll Shineboc 120 Grit Roll: 120 grit in an 82 feet roll Check price on Amazon
- Best Fine Grit Roll Newkita 600 Grit Roll: 600 grit for fine polishing Check price on Amazon
The machines

6 PCS Emery Cloth Roll 80-600 Grit 1" x 19.7'
A 6-roll assortment from 80 to 600 grit, each roll 1 inch x 19.7 feet, with aluminum oxide on a tear-resistant nylon backing in a dispenser box.
Pros
- 6 grits from 80 to 600 grit for rough grinding to fine polishing
- Aluminum oxide abrasive with a tear-resistant nylon backing
- Dispenser box keeps the rolls organized for quick access
- Thin, flexible design sands edges, curves and hard-to-reach spots
Cons
- No warranty term is stated
- No one-grit long roll is included, unlike the 82 feet Shineboc roll
- Each roll is only 1 inch wide, so wide surfaces take more passes
- No 150 grit step: the set jumps from 120 grit to 240 grit

Emery Cloth Roll, 6 Grits 1'' x 19.7' Sand Paper
A 6-grit assortment from 80 to 600 grit, each roll 1 inch x 19.7 feet, with aluminum oxide on a nylon cloth backing in a labeled dispenser box.
Pros
- 6 grits from 80 to 600 grit, including a 150 grit step
- Aluminum oxide with grit uniformly distributed, as the listing states
- Nylon cloth backing stated as more tough and lasting for wet sanding
- Each dispenser is labeled with the size for quick grit selection
Cons
- No warranty term is stated
- Each roll is only 1 inch wide, so wide surfaces take more passes
- No one-grit long roll is included, unlike the 82 feet Shineboc roll
- Rolls are 19.7 feet each, slightly shorter than the 20 feet Bates rolls

Bates- Emery Cloth Roll, 1" x 20 FT
A 6-roll assortment from 80 to 600 grit, each roll 1 inch x 20 feet, with a dispenser box for mess-free tearing to length.
Pros
- 6 grits from 80 to 600 grit, including a 150 grit step
- 20 feet per roll, the longest assortment rolls here
- Dispenser box allows quick, mess-free tearing to the desired length
- Stated for sanding, smoothing and polishing metal, wood and more
Cons
- No warranty term is stated
- Abrasive material is not named, unlike the aluminum oxide listings here
- No wet sanding use is stated, unlike the other sets here
- Each roll is only 1 inch wide

Shineboc Emery Cloth Roll 120 Grit
One 120 grit roll, 1 inch x 82 feet, with aluminum oxide on a cloth backing for wet and dry sanding.
Pros
- 82 feet of cloth-backed roll, the longest roll here
- Aluminum oxide, anti-static and wear resisting, stated to prevent clogging
- Grit printed on the back for easy identification
- Cloth backing stated as abrasion-resistant, durable and stretch-resistant
Cons
- No warranty term is stated
- 120 grit roll only; no grit range is included
- No dispenser box is stated
- No finer grit is included for finish work

600 Grit Emery Cloth Sandpaper Roll
One 600 grit roll, 1 inch x 19 feet, with aluminum oxide on a cloth backing for wet and dry sanding and fine polishing.
Pros
- 600 grit for fine surface finishes and meticulous polishing
- Aluminum oxide with cloth backing
- Roll cuts to the desired length, minimizing waste
- Stated for drywall mud, rusty metal, wood, pots and pans, and car parts
Cons
- No warranty term is stated
- 600 grit roll only; no coarse grit is included
- Smallest roll here at 19 feet
- No dispenser box is stated
Other welders and gear to compare
Bates- Emery Cloth RollCheck price on Amazon
240 Grit Emery Cloth Sandpaper RollCheck price on Amazon
Benchmark Abrasives 1-1/2" x 150’ Shop Roll Emery ClothCheck price on Amazon
ChampNet Emery Cloth Roll Grit 180 Plumbers Sanding ClothCheck price on Amazon
Emery Cloth RollCheck price on Amazon
Spec sheet comparison
| Roll | Gear Score | Grits | Roll size | Backing | Dispenser |
|---|---|---|---|---|---|
| Pukamam 6-Grit Roll Set | 9.6/10 | 80, 120, 240, 320, 400, 600 | 1 inch x 19.7 feet each | Nylon, tear-resistant | Yes |
| HL-YMXQ 6-Grit Roll Set | 9.6/10 | 80, 150, 240, 320, 400, 600 | 1 inch x 19.7 feet each | Nylon cloth | Yes, labeled |
| Bates 6-Grit Roll Set | 9.6/10 | 80, 150, 240, 320, 400, 600 | 1 inch x 20 feet each | Not stated | Yes |
| Shineboc 120 Grit Roll | 9.5/10 | 120 | 1 inch x 82 feet | Cloth | Not stated |
| Newkita 600 Grit Roll | 9.4/10 | 600 | 1 inch x 19 feet | Cloth | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 29 October 2026.
Buying guide: the best emery cloth roll
Grit range
Grit numbers run from 80 at the coarse end to 600 at the fine end across these listings. The assortment sets cover 80 to 600 grit with 6 grits in the box, while the one-grit rolls here are 120 grit and 600 grit. The smaller the number, the coarser the sand, as the Shineboc listing states, so start coarse for rust and rough shaping and step up toward 600 grit for a fine finish.
Roll length and width
The assortment rolls are 1 inch wide and 19.7 feet or 20 feet long each. The Shineboc roll is 1 inch wide and 82 feet long. Cut the roll to the length the job needs, as the HL-YMXQ and Newkita listings state, and keep the rest on the roll. The strip disc vs flap disc comparison covers two other abrasive shapes.
Backing and wet sanding
The Pukamam and HL-YMXQ listings state a nylon backing that resists tearing, and the Shineboc listing states a cloth backing that resists tearing. The Pukamam, HL-YMXQ, Newkita and Shineboc listings state wet and dry sanding, while the Bates listing does not state wet sanding. For power-tool stock removal, the diamond vs abrasive cut-off wheel comparison covers wheel choice.
Before You Strike an Arc
- Check the grit on the roll before sanding: the assortment boxes hold 80 to 600 grit, and the one-grit rolls here are 120 grit and 600 grit.
- Cut the roll to the length the job needs; the HL-YMXQ and Newkita listings state the rolls can be cut to any length.
- Match wet or dry use to the listing: the Pukamam, HL-YMXQ, Newkita and Shineboc listings state wet and dry sanding.
- Check the dispenser label for the grit before pulling a length, as the HL-YMXQ listing states each dispenser is labeled with the size.
FAQ for welders
What is emery cloth grit?
Grit is the abrasive grade on the roll. The listings here run from 80 grit at the coarse end to 600 grit at the fine end, and the smaller the number, the coarser the sand, as the Shineboc listing states.
Is emery cloth aluminum oxide?
The Pukamam, HL-YMXQ, Newkita and Shineboc listings state aluminum oxide. The Bates listing states premium abrasive material without naming the abrasive.
Is emery cloth for metal?
Yes. The Pukamam listing states metal, wood and plastic, and the HL-YMXQ listing states wood, plastic, metal and drywall. The Newkita listing also states rusty metal and car parts.
Is emery cloth silicon carbide?
None of the listings here state silicon carbide. The listings that name an abrasive state aluminum oxide.
What length emery cloth roll should I buy?
The assortment rolls here are 1 inch x 19.7 feet or 1 inch x 20 feet each, while the Shineboc roll is 1 inch x 82 feet. The HL-YMXQ and Newkita listings state the rolls can be cut to any length, so buy the roll that covers the grits the job needs.
Scoring, line by line
Each roll is scored on performance (stated grit range and sanding use), build (abrasive and backing), value, safety and warranty. No listing states a safety standard or a warranty term, so safety and warranty contribute nothing for any roll here.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Pukamam 6-Grit Roll Set | 9.6 | 30 | 21 | 21 | n/a | 0 |
| HL-YMXQ 6-Grit Roll Set | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Bates 6-Grit Roll Set | 9.6 | 29 | 20 | 20 | n/a | 0 |
| Shineboc 120 Grit Roll | 9.5 | 26 | 20 | 21 | n/a | 0 |
| Newkita 600 Grit Roll | 9.4 | 23 | 19 | 18 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.
More welding guides
Related: metal fab tools, best angle grinder for car restoration, belt grinder vs angle grinder and strip disc vs flap disc.




