Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Emery Cloth Grit 360 (2026): 5 Rolls Compared

Five emery cloth rolls compared on grit, size, backing and use, from the exact 360 grit roll to a 1000 grit finishing roll.

Best Emery Cloth Grit 360 (2026): 5 Rolls Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1LYHLYA 360 Grit RollBest OverallLYHLYA 360 Grit Roll9.6/10View on Amazon
  2. 2Tonmp Assorted 4-Roll SetBest AssortmentTonmp Assorted 4-Roll Set9.6/10View on Amazon
  3. 3Newkita 320 Grit RollBest Grit RangeNewkita 320 Grit Roll9.6/10View on Amazon
  4. 4CHAMPNET 180 Open Mesh RollBest for Copper PipeCHAMPNET 180 Open Mesh Roll9.5/10View on Amazon

A weld bead that needs smoothing, a cut edge with a burr, a copper pipe that needs cleaning before a joint: each job wants an abrasive that cuts without tearing the work apart. The best emery cloth grit 360 picks below range from the exact focus grit to a fine finishing grit, with sizes, backings and uses taken from what each listing states. For each roll the guide lists what the listing states and says plainly what it does not.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall LYHLYA 360 Grit Roll: Exact 360 grit, 1 inch x 8.7 yards, aluminum oxide, folds and cuts to length Check price on Amazon
  • Best Assortment Tonmp Assorted 4-Roll Set: Four grits, 80, 120, 220 and 400, with 5 yards per roll and nylon backing Check price on Amazon
  • Best Grit Range Newkita 320 Grit Roll: 320 grit roll on cloth backing, cut to length Check price on Amazon
  • Best for Copper Pipe CHAMPNET 180 Open Mesh Roll: Open mesh 180 grit, 1.5 inches x 10 yards, for copper pipe and burrs Check price on Amazon

The machines

360 Grit Continuous Sandpaper Roll 1" x 8.7 Yard

360 Grit Continuous Sandpaper Roll 1" x 8.7 Yard

LYHLYA9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 360 grit aluminum oxide emery cloth roll, 1 inch x 8.7 yards, that folds, tears or cuts to length for wood, metal, crafts and synthetic materials.

Pros

  • Exact 360 grit, the focus grit here
  • 1 inch x 8.7 yards, cut or torn to length
  • Soft texture with low dust, per the listing
  • Suits wood, metal, crafts and synthetic materials

Cons

  • 1 inch width only, no wider option stated
  • No warranty term stated on the listing
  • Single grit per roll; other grits are separate rolls
  • Backing material not stated in the listing
Total 20 Yard 2 Inch Wide Emery Cloth Sandpaper

Total 20 Yard 2 Inch Wide Emery Cloth Sandpaper

Tonmp9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A four-roll assorted emery cloth set in 80, 120, 220 and 400 grits, 2 inches wide with 5 yards per roll, on nylon cloth backing for wet and dry use.

Pros

  • Four grits in one set: 80, 120, 220, 400
  • Four rolls, 5 yards each, 20 yards total
  • Nylon cloth backing for strength
  • Wet and dry use, grit printed on the back

Cons

  • No 360 grit roll in the set
  • No warranty term stated on the listing
  • 2 inch width only
  • Assorted grits mean switching rolls between stages
320 Grit Emery Cloth Sandpaper Roll

320 Grit Emery Cloth Sandpaper Roll

Newkita9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 320 grit aluminum oxide emery cloth roll, 1 inch x 19 feet, on cloth backing that cuts to the length each job needs.

Pros

  • 320 grit, near the focus grit
  • 1 inch x 19 feet, cut to length
  • Aluminum oxide on cloth backing
  • Wet and dry use for wood, metal and drywall mud

Cons

  • Not the exact 360 grit
  • No warranty term stated on the listing
  • 1 inch width only
  • Single roll, no assortment
ChampNet Emery Cloth Roll Grit 180 Plumbers

ChampNet Emery Cloth Roll Grit 180 Plumbers

CHAMPNET9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 180 grit open mesh emery cloth roll, 1.5 inches x 10 yards, double sided aluminum oxide for copper pipe cleaning and burr removal.

Pros

  • Open mesh double side design, resists clogging
  • 180 grit for copper pipe cleaning and burr removal
  • 1.5 inches x 10 yards, ample length
  • Aluminum oxide construction

Cons

  • 180 grit, not the 360 focus grit
  • No warranty term stated on the listing
  • Wet or dry use not stated in the listing
  • Single grit per roll
MiJunHD 1000 Grit Sandpaper Roll

MiJunHD 1000 Grit Sandpaper Roll

MiJunHD9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1000 grit aluminum oxide emery cloth roll, 1 metre x 115 mm, for wet and dry sanding, polishing and finishing.

Pros

  • 1000 grit, the finest grit here
  • 1 metre x 115 mm roll, fold and cut to length
  • Wet and dry use
  • Aluminum oxide, wear-resistant per the listing

Cons

  • 1000 grit, not the 360 focus grit
  • No warranty term stated on the listing
  • Fine grit suits finishing, not heavy removal
  • Single roll, single grit

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Grit Size Backing Warranty
LYHLYA 360 Grit Roll 9.6/10 360 1 inch x 8.7 yards Not stated Not stated
Tonmp Assorted 4-Roll Set 9.6/10 80, 120, 220, 400 2 inch x 5 yards per roll Nylon cloth Not stated
Newkita 320 Grit Roll 9.6/10 320 1 inch x 19 feet Cloth Not stated
CHAMPNET 180 Open Mesh Roll 9.5/10 180 1.5 inch x 10 yards Cloth Not stated
MiJunHD 1000 Grit Roll 9.5/10 1000 1 metre x 115 mm Not stated Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 30 October 2026. A figure from one listing describes that listing only.

Buying guide: the best emery cloth grit 360 options

Grit numbers

Grit numbers describe the abrasive grain: a lower number means a coarser grain that removes material faster, and a higher number means a finer grain for smoothing and finishing. The LYHLYA roll states 360 grit, the exact focus grit here. The Newkita roll states 320 grit, near the focus grit, while the Tonmp set covers 80, 120, 220 and 400 grits for stepping from coarse removal to finer finishing. The CHAMPNET roll states 180 grit for cleaning copper pipe and removing burrs, and the MiJunHD roll states 1000 grit for fine finishing work. Match the grit to the stage of the job: coarse grits shape and clean, fine grits finish.

Roll size and backing

Roll size decides how much abrasive you have and how wide a pass each strip covers. The Tonmp rolls state 2 inches wide with 5 yards per roll, while the CHAMPNET roll states 1.5 inches x 10 yards and the LYHLYA and Newkita rolls state 1 inch wide. The MiJunHD roll states 1 metre x 115 mm. Backing matters for tearing and flex: the Tonmp set states a nylon cloth backing, the Newkita roll states a cloth backing, and the CHAMPNET roll uses an open mesh design that clears debris instead of clogging. Rolls that cut to length, like the LYHLYA, Newkita and MiJunHD rolls, let you tear or cut only what the job needs.

Wet or dry use

Some rolls state wet and dry use. The Newkita roll, the MiJunHD roll and the Tonmp set state wet and dry use in their listings. Wet use is not stated for the LYHLYA and CHAMPNET rolls, so check the listing before running one wet.

Cut to length

Rolls beat sheets when the job needs a strip, not a sheet. The Newkita roll cuts to the desired length, the LYHLYA roll folds, tears or cuts to desired lengths, and the MiJunHD roll folds and cuts into different lengths as needed. The Tonmp rolls also cut to any length, with grit numbers printed on the back for quick identification. Cut only what you need and keep the rest of the roll for the next job.

Before You Strike an Arc

  • Check the grit: the LYHLYA roll states 360 grit; the Tonmp set prints grit numbers on the back.
  • Cut to length: the LYHLYA, Newkita and MiJunHD rolls cut or tear to the length the job needs.
  • Match wet or dry: the Newkita, MiJunHD and Tonmp listings state wet and dry use.
  • Clear debris: the CHAMPNET open mesh design clears debris instead of clogging.

FAQ for welders

What is emery cloth?

Emery cloth is a cloth-backed abrasive: abrasive grain bonded to a cloth strip that you cut or tear to length. The rolls here use aluminum oxide grain for sanding, polishing, deburring and cleaning metal, wood and other materials.

Is 360 grit coarse or fine?

360 grit sits in the middle of this set: coarser than the 1000 grit MiJunHD roll and finer than the 180 grit CHAMPNET roll and the 80, 120 and 220 grits in the Tonmp set. It suits smoothing and finishing after coarser grits, rather than heavy material removal.

Can emery cloth be used wet?

Some rolls state wet and dry use: the Newkita roll, the MiJunHD roll and the Tonmp set. Wet use is not stated for the LYHLYA and CHAMPNET rolls, so check the listing before running one wet.

How do I choose a roll size?

Match width and length to the job. The LYHLYA and Newkita rolls state 1 inch wide, the CHAMPNET roll states 1.5 inches wide, and the Tonmp rolls state 2 inches wide, while the MiJunHD roll states 115 mm wide. Longer rolls, like the CHAMPNET roll at 10 yards and the Tonmp set at 20 yards total, cover more jobs before running out.

Does emery cloth work on copper pipe?

The CHAMPNET roll states cleaning copper pipe as a use, with an open mesh design in 180 grit that clears debris.

Related: our metal fab tools hub.

Scoring, line by line

Each roll is scored on performance, build, value, safety and warranty, using only what the listing publishes. The weights are on our How We Pick page. No listing states a safety certification or a warranty term, so every roll scores zero on safety and warranty, and the ranking turns on grit, size, backing and use.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
LYHLYA 360 Grit Roll 9.6 30 21 21 n/a 0
Tonmp Assorted 4-Roll Set 9.6 29 20 21 n/a 0
Newkita 320 Grit Roll 9.6 28 21 20 n/a 0
CHAMPNET 180 Open Mesh Roll 9.5 27 20 20 n/a 0
MiJunHD 1000 Grit Roll 9.5 27 20 19 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides