Garnet vs Plastic Blasting Media: Which One Should You Buy?
Garnet and urea plastic blasting media do different jobs: garnet preps metal surfaces for coating, while plastic media strips paint and coatings from vehicles and steel.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
55 LBS-Garnet #120 Grit Sandblaster Sand Sand9.6/10View on Amazon - 2
Blast Media Garnet Abrasive, 80 Grit, 55 lb Box9.4/10View on Amazon - 3
Urea Plastic Blast Media - Mesh Size 40/609.3/10View on Amazon - 4
Urea Plastic Blast Media - Mesh Size 20/309.3/10View on Amazon
Verdict. Garnet preps bare metal for coating, while urea plastic media strips paint and coatings from finished parts. Pick garnet for mill scale removal and surface prep, and pick plastic media for stripping paint from cars, aircraft and other coated parts.
A blasting cabinet job usually starts one of two ways: bare metal that needs a profile before coating, or a coated part that needs its paint off. Garnet vs plastic blasting media is the choice between those two jobs, and the four listings here show the split clearly.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The four picks

55 LBS-Garnet #120 Grit Sandblaster Sand Sand
A 55 lb box of #120 grit garnet media rated for blasting rates up to 330 ft2/hr, with a stated size of 250-125 microns for surface prep on stainless steel, aluminum, titanium and glass etching.
Pros
- Blasting rate up to 330 ft2/hr per the listing
- Size stated as 250-125 microns for fine surface prep work
- Non-toxic, inert and natural, with crystalline silica less than 1%
- 55 lb box for larger surface prep jobs
Cons
- Part number reads 120 Git against a 120 Grit title
- No pressure range stated in the listing
- No reuse count stated in the listing
- No warranty term stated in the listing

Blast Media Garnet Abrasive, 80 Grit, 55 lb Box
A 55 lb box of 80 grit garnet media at 150-297 microns, rated for 60-100 psi and 4-6 cycles, aimed at industrial blasting.
Pros
- Pressure range stated at 60-100 psi
- Reuse stated at 4-6 cycles
- Particle diameter stated at 150-297 microns
- 55 lb box, the same pack weight as the JRUKM garnet
Cons
- No blasting rate stated in the listing
- No consumption rate stated in the listing
- No safety or silica statement in the listing
- No warranty term stated in the listing

Urea Plastic Blast Media - Mesh Size 40/60
A 5 lb bag of urea plastic blast media in 40/60 mesh for stripping paint and removing coatings from cars, aircraft, trucks, trailers, trains, vans, buses and steel.
Pros
- Stated for stripping paint and coatings from vehicles and steel
- Mesh size stated as 40/60
- 5 lb pack suits small stripping jobs
- Color stated as multi-colored in the spec table
Cons
- No pressure range stated in the listing
- No reuse count stated in the listing
- No grit or micron figure stated in the listing
- No warranty term stated in the listing

Urea Plastic Blast Media - Mesh Size 20/30
A 5 lb bag of urea plastic blast media in 20/30 mesh for stripping paint and removing coatings from cars, aircraft, trucks, trailers, trains, vans, buses and steel.
Pros
- Stated for stripping paint and coatings from vehicles and steel
- Mesh size stated as 20/30, the lower mesh number of the two plastic examples
- 5 lb pack suits small stripping jobs
- Same stated uses as the 40/60 example, so mesh size is the difference between the two media
Cons
- Title ends in a bare 5.0 with no unit; the table clarifies it as pounds
- No pressure range stated in the listing
- No reuse count stated in the listing
- No warranty term stated in the listing
Other welders and gear to compare
ElaraBerry Paint Removal Blast Media 20/30 MeshCheck price on Amazon
Premium Garnet Abrasive Blast Media 30/60 MeshCheck price on Amazon
Eastwood 50-Lb of Glass Beads Blasting Abrasive Media 140-230Check price on Amazon
Garnet Blasting AbrasiveCheck price on Amazon
Sand blasting media 55 LBS Garnet #100 Grit Sandblaster sandCheck price on Amazon
50 LBSCheck price on Amazon
Side by side
| JRUKM Garnet 120 Grit | Elite Tool Garnet 80 Grit | IMS Urea Plastic Media 40/60 | IMS Urea Plastic Media 20/30 | |
|---|---|---|---|---|
| Gear Score | 69 | 56 | 52 | 51 |
| Grit | #120 grit | 80 grit | 40/60 mesh | 20/30 mesh |
| Particle size | 250-125 microns | 150-297 microns | Not stated | Not stated |
| Pack weight | 55 lb | 55 lb | 5.0 pounds | 5.0 pounds |
| Pressure range | Not stated | 60-100 psi | Not stated | Not stated |
| Reuse | Not stated | 4-6 cycles | Not stated | Not stated |
| Stated use | Surface prep and mill scale removal | Industrial blasting | Paint and coating stripping | Paint and coating stripping |
| Warranty | Not stated | Not stated | Not stated | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 6 November 2026. Only the Elite Tool Center garnet states a pressure range or a reuse count, and none of the four listings states a warranty term.
Garnet vs plastic blasting media: grit and particle size
The garnet examples state grit and particle size. The JRUKM garnet is #120 grit at 250-125 microns, and the Elite Tool Center garnet is 80 grit at 150-297 microns, with a minimum mesh of 40 and a maximum mesh of 80. The plastic examples state mesh only: 40/60 for the finer bag and 20/30 for the coarser one, with no grit or micron figure in either listing.
That gap matters when you match media to the job. Grit and microns let you compare the two garnet examples directly, while the plastic examples can only be compared against each other on mesh number. See our best blasting media guide for how these media types sit beside aluminum oxide and glass bead.
What each side is for
The garnet listings aim at surface prep: the JRUKM listing names mill scale removal and surface prep on stainless steel, aluminum, titanium and glass etching, and describes the grains as leaving a uniform texture for coating adhesion. The Elite listing aims its garnet at industrial blasting.
The plastic listings aim at removal, not prep: both name stripping paint and removing coatings from cars, aircraft, trucks, trailers, trains, vans, buses and steel, and both add blast cleaning, non-skid additive and filler uses. Neither plastic listing claims a surface profile for coating, and neither garnet listing claims paint stripping.
Pressure, reuse and pack size
Only one listing states a pressure range: the Elite Tool Center garnet at 60-100 psi. It is also the only listing that states reuse, at 4-6 cycles. The JRUKM garnet states performance instead, with a blasting rate up to 330 ft2/hr and a consumption rate of 1.25-2.0 lb/ft2, but no pressure and no reuse count.
Pack size splits these four examples cleanly. Both garnet examples come in 55 lb boxes, while both plastic examples come in 5 lb bags. The garnet boxes suit longer surface prep sessions; the plastic bags suit small stripping jobs.
Choose garnet if
- You are prepping bare metal for coating and want a stated surface profile; only the JRUKM listing states one.
- You want stated grit and particle size to compare one media against another.
- You blast in longer sessions and want a 55 lb box.
- You want the stated blasting rate of up to 330 ft2/hr from the JRUKM listing.
Choose plastic blasting media if
- You are stripping paint and coatings from cars, aircraft or other coated parts.
- You work in small batches and a 5 lb bag is enough.
- You want to compare two mesh sizes, 40/60 and 20/30, for the same job.
- You do not need a stated pressure range or reuse count in the listing.
Before You Strike an Arc
- Wear a respirator rated for the dust your media makes, eye protection, gloves and long sleeves before blasting.
- Blast with ventilation and clear anything flammable from the area.
- Check the pressure range your media listing states, and stay inside it; only the Elite Tool Center garnet states 60-100 psi here.
- Check the media on arrival: confirm the grit or mesh on the bag matches the listing, and look for the part number on the box.
- Keep the blast cabinet sealed and the dust collector running while you work.
FAQ for welders
Can garnet blasting media be reused?
The Elite Tool Center garnet listing states reuse of 4-6 cycles. The JRUKM garnet listing states no reuse count, so there is no stated figure to compare it against.
What pressure does garnet blasting media need?
The Elite Tool Center garnet listing states a pressure range of 60-100 psi. The JRUKM garnet listing states no pressure range, and neither plastic media listing states one either.
Does plastic blasting media remove paint without cutting the base material?
The plastic listings describe the media for stripping paint and removing coatings from cars, aircraft, trucks and steel. Neither listing states what happens to the base material underneath, so match the mesh to a small area first and check the surface before committing to the whole part.
Which grit is finer, 80 or 120?
The listings state the figures directly: the JRUKM #120 grit garnet lists 250-125 microns, and the Elite 80 grit garnet lists 150-297 microns. The #120 range sits lower at the fine end, 125 microns against 150 microns for the 80 grit.
How much media comes in a box?
Both garnet examples come in 55 lb boxes, and both plastic examples come in 5 lb bags. The garnet boxes suit longer prep sessions, while the plastic bags suit small stripping jobs.
Related: garnet vs aluminum oxide blasting media, glass bead vs aluminum oxide blasting media, sandblasting vs wire wheel for rust removal, and our soda blaster vs sandblaster comparison.
Scoring, line by line
Each pick is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| JRUKM Garnet 120 Grit | 9.6 | 30 | 21 | 20 | 7 | 0 |
| Elite Tool Garnet 80 Grit | 9.4 | 28 | 20 | 20 | 0 | 0 |
| IMS Urea Plastic Media 40/60 | 9.3 | 26 | 19 | 19 | 0 | 0 |
| IMS Urea Plastic Media 20/30 | 9.3 | 24 | 19 | 19 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




