Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Flap Disc Uses: Grinding, Blending and Finishing

Flap disc uses for steel work: grinding, blending and finishing, with grit, shape and size explained and four 40-grit zirconia discs compared.

Flap Disc Uses: Grinding, Blending and Finishing
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Merryland 20 Pack 40 Grit Flap Disc 5 inch MetalMerryland 20 Pack 40 Grit Flap Disc 5 inch Metal9.5/10View on Amazon
  2. 2Sali 100 Pack Zirconia Flap Disc 40 Grit 4.5" xSali 100 Pack Zirconia Flap Disc 40 Grit 4.5" x9.5/10View on Amazon
  3. 3WORKPRO 20-Pack Zirconia Flap DiscsWORKPRO 20-Pack Zirconia Flap Discs9.5/10View on Amazon
  4. 4BHA 4-1/2 x 7/8 Zirconia Flap Disc T27 AngleBHA 4-1/2 x 7/8 Zirconia Flap Disc T27 Angle9.5/10View on Amazon

A weld bead that stands proud of the plate, a rust patch on a gate, a rough edge on a cut bracket: a flap disc is the tool that takes them down with a pass of the grinder. It grinds like a grinding wheel and finishes like sandpaper, and the choice is grit, shape and size. These flap disc uses cover grinding, blending and finishing on steel, with the discs that do each job.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Merryland 20 Pack 40 Grit Flap Disc 5 inch Metal

Merryland 20 Pack 40 Grit Flap Disc 5 inch Metal

Merryland9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 inch T29 flap disc in 40 grit with blue zirconium corundum, a reinforced fiberglass backing and a 12,250 max RPM rating.

Pros

  • 5 inch disc for wider coverage than the 4-1/2 inch discs here
  • Max RPM 12,250 with EN 13743 and MPA certification stated
  • Reinforced fiberglass backing absorbs vibrations without smearing
  • 40 grit for heavy material removal, deburring and coarse blending

Cons

  • 12,250 max RPM is the lowest here, so it does not fit grinders that spin faster
  • No warranty term is stated
  • 5 inch size needs a 5 inch grinder, not a 4-1/2 inch one
  • 40 grit only in this pack, so finer finishing needs another disc
Sali 100 Pack Zirconia Flap Disc 40 Grit 4.5" x

Sali 100 Pack Zirconia Flap Disc 40 Grit 4.5" x

SALI9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100-pack of 4.5 inch T29 zirconia flap discs in 40 grit, with a fiberglass backing and a 13,300 max RPM rating.

Pros

  • 100 discs in the box, the largest pack here by far
  • Zirconia abrasive holds up to high temperatures and pressure
  • Bevel type 29 angled for contours, edge and weld blending
  • Rated up to 13,300 RPM for fast grinders

Cons

  • 100 discs is a lot to store for a small shop
  • 40 grit only in this pack, so finer finishing needs another disc
  • Listed for metals, wood and plastics, with no concrete or stone use stated
  • 4.5 inch size only, with no 5 inch option in this pack
WORKPRO 20-Pack Zirconia Flap Discs

WORKPRO 20-Pack Zirconia Flap Discs

WORKPRO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20-pack of 4-1/2 inch T29 zirconia flap discs in 40 grit, with a fiberglass backing plate and a 13,000 max RPM rating.

Pros

  • Zirconia alumina lasts longer than standard aluminum oxide abrasives
  • T29 angled flaps suit edge work and contoured surfaces
  • Fiberglass backing plate absorbs vibration and will not contaminate the surface
  • 20 discs for metal, wood, concrete, stone and rust removal

Cons

  • 40 grit only in this pack, so finer finishing needs another disc
  • 4-1/2 inch size only, with no 5 inch option in this pack
  • 20 discs is a small pack next to the 100-pack here
  • Listed for metals and non-ferrous materials, with no stainless steel use stated
BHA 4-1/2 x 7/8 Zirconia Flap Disc T27 Angle

BHA 4-1/2 x 7/8 Zirconia Flap Disc T27 Angle

BHA9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of 4-1/2 inch T27 flat zirconia flap discs in 40 grit, with less than 0.1% iron, sulfur and chlorine for contaminant-free work on stainless.

Pros

  • T27 flat profile for smooth, controlled work on flat metal surfaces
  • Less than 0.1% iron, sulfur and chlorine, so it stays contaminant-free on stainless
  • Self-sharpening zirconia grain exposes fresh cutting edges as it wears
  • Rated up to 13,300 RPM for fast grinders

Cons

  • No warranty term is stated
  • 10 discs is the smallest pack here
  • T27 flat profile suits flat work, not contours and edges
  • 40 grit only in this pack, so finer finishing needs another disc

Flap disc uses: grinding, blending and finishing

Grinding comes first. A 40 grit flap disc takes down weld beads, strips rust and removes stock fast, and every disc here is 40 grit for that job. The WORKPRO and SALI discs (on Amazon) list heavy stock removal, the Merryland disc (on Amazon) lists heavy material removal and shaping hard metals, and the BHA disc (on Amazon) starts with 40 grit for aggressive stock removal, stripping rust and grinding down welds.

Blending comes next. The T29 discs have angled flaps that suit contours, edges and weld blending, and the SALI bevel type 29 is angled for radius grinding as well. The T27 flat disc works at a 0 to 15 degree angle on flat metal, so it suits flat surfaces and leaves a smooth, controlled finish. Pick T29 for curves and edges, and T27 for flat plate.

Finishing comes last. Move up in grit for blending and surface prep, and finish with 120 grit for a smooth, refined surface, as the BHA line directs. A flap disc finishes like sandpaper because the flaps wear down as they cut. The BHA disc’s zirconia grain is self-sharpening, exposing fresh cutting edges as it wears. Change the disc when it stops cutting instead of pressing harder.

Side by side

Disc Gear Score Size Grit Type Max RPM Pack
Merryland 5in T29 40 Grit 9.5/10 5 in x 7/8 in 40 T29 12,250 20
SALI 4.5in T29 40 Grit 100-Pack 9.5/10 4.5 in x 7/8 in 40 T29 13,300 100
WORKPRO 4.5in T29 40 Grit 20-Pack 9.5/10 4.5 in x 7/8 in 40 T29 13,000 20
BHA 4.5in T27 40 Grit 10-Pack 9.5/10 4.5 in x 7/8 in 40 T27 13,300 10

All four discs are 40 grit zirconia on a 7/8 inch arbor, so the choice is size, shape, pack and max RPM. Ratings are as the makers state them.

The discs: four 40-grit flap discs

Disc choice is the abrasive step: every disc here is 40 grit zirconia, so pick by size, shape and how many discs the box holds.

Picking the right disc

Size first. Three discs here are 4-1/2 inch and one is 5 inch, and all four take a 7/8 inch arbor. Match the disc to the grinder, and check the max RPM on the disc against the grinder: the WORKPRO disc (on Amazon) is rated up to 13,000 RPM, the SALI and BHA discs up to 13,300 RPM, and the Merryland disc to a max of 12,250 RPM. A disc rated below the grinder speed does not belong on that grinder.

Shape next. T29 is the angled shape for contours, edges and weld blending, and T27 is the flat shape for flat surfaces at a 0 to 15 degree working angle. Grit last: 40 grit is the coarse start for stock removal, and finer grits blend and finish. The BHA line also comes in 60, 80 and 120 grit.

Grinder safety. A flap disc spins fast and throws sparks and grit, so wear eye and face protection, keep the guard in place, and clamp the work before grinding. Never run a disc rated below the grinder speed, and check the disc for damage before mounting it. See the OSHA machine guarding overview.

FAQ for welders

What is a flap disc used for?

Grinding, blending and finishing metal with an angle grinder. The discs here grind weld beads, strip rust, remove stock, blend welds and finish surfaces on steel, stainless steel and iron, and the SALI and WORKPRO discs also list wood and plastics.

What is the difference between T27 and T29 flap discs?

T27 is flat and works at a 0 to 15 degree angle on flat metal, while T29 is angled for contours, edges and weld blending. The BHA disc here is T27, and the WORKPRO, SALI and Merryland discs are T29.

What grit flap disc should I start with?

40 grit for aggressive stock removal, stripping rust and grinding down welds. Move up to 60 or 80 grit for blending and surface prep, and finish with 120 grit for a smooth, refined surface.

What size flap disc fits a 4-1/2 inch grinder?

A 4-1/2 inch disc with a 7/8 inch arbor, rated for the grinder speed. The WORKPRO, SALI and BHA discs here are 4-1/2 inch with a 7/8 inch arbor, and the Merryland disc is 5 inch for a 5 inch grinder.

Related: metal fab tools, angle grinder types, grinding wheel size and angle grinder guard types. For cutting discs, see the best cut off wheels for angle grinder and the best face shield for grinding metal.

More buying guides