Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Grinding Wheel Size Guide

Grinding wheel size means diameter, arbor, thickness and grit, and each has to match the grinder and the job; this guide matches three sets to the bench and mini grinders they fit.

Grinding Wheel Size Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Truper Silicon Carbide Grinding Wheel for BenchTruper Silicon Carbide Grinding Wheel for Bench9.6/10View on Amazon
  2. 23 inch Grinding Disc Set3 inch Grinding Disc Set9.6/10View on Amazon
  3. 3WORKEASE 4Pcs Bench Grinder Wheel Set for 6 InchWORKEASE 4Pcs Bench Grinder Wheel Set for 6 Inch9.6/10View on Amazon

A wheel that will not mount is a wheel that never grinds. The guard, the spindle and the job all ask for a size, and grinding wheel size is the answer: the diameter, the arbor hole, the thickness and the grit. Match each of them to the grinder on the bench and the metal in front of you, and the wheel does the work it was made for.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Truper Silicon Carbide Grinding Wheel for Bench

Truper Silicon Carbide Grinding Wheel for Bench

Truper9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 inch silicon carbide wheel, 60 grit, with a 1 inch arbor and adapters for smaller arbors, rated to 4,500 RPM.

Pros

  • States diameter, thickness, arbor, grit and RPM in one place
  • Adapters let the 1 inch hole fit 1/2, 5/8 and 3/4 inch spindles
  • 60 grit silicon carbide suits tungsten carbide tools and non-ferrous metal
  • Rated to 4,500 RPM

Cons

  • Only one wheel in the box
  • No warranty term is stated
  • 3/4 inch thick suits bench grinding, not thin cutting work
  • Needs the right adapter fitted before it mounts on a smaller arbor
3 inch Grinding Disc Set

3 inch Grinding Disc Set

YKLP9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20 pack of 3 inch discs for a mini angle grinder: cutting discs, flap discs, wool felt discs and HSS saw blades.

Pros

  • 20 pieces cover cutting, flap sanding, polishing and sawing in one pack
  • 10 cutting discs and 5 flap discs make up most of the 20 piece pack
  • 80 grit discs suit heavier removal and sanding
  • HSS saw blades add sawing for wood and metal work

Cons

  • Only 3 wool felt discs and 2 HSS blades, so the polishing and sawing shares run out first
  • No warranty term is stated
  • 3 inch discs fit a mini angle grinder only, not a bench grinder
  • Wool felt discs suit fine polishing only, not stock removal
WORKEASE 4Pcs Bench Grinder Wheel Set for 6 Inch

WORKEASE 4Pcs Bench Grinder Wheel Set for 6 Inch

WORKEASE9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4 piece bench grinder set for a 6 inch grinder with a 1/2 inch arbor: wire wheel, 60 grit wheel, buffing wheel and polishing paste.

Pros

  • Four pieces in one set cover rust removal, grinding, buffing and polishing
  • 60 grit silicon carbide wheel suits sharpening drill bits, knives and blades
  • Wire wheel strips burrs and rust from metal workpieces
  • Buffing wheel and polishing paste are listed for smooth metal finishes

Cons

  • Fits a 6 inch bench grinder with a 1/2 inch arbor only; it does not fit a mini angle grinder
  • Paste and buffing wheel suit polishing only, not stock removal
  • Heavy rust needs the wire wheel first and the grinding wheel second, so two steps per piece
  • Only one grinding wheel is in the set, at 60 grit, with no finer wheel included

What grinding wheel size means

Diameter decides whether the wheel fits under the guard. A bench grinder here takes a 6 inch wheel, while a mini angle grinder takes a 3 inch disc, and swapping them is not an option. The arbor hole has to match the spindle too: the WORKEASE set takes a 1/2 inch arbor, and the Truper wheel (on Amazon) takes a 1 inch arbor with adapters for 1/2, 5/8 and 3/4 inch spindles.

Thickness and grit decide what the wheel does once it spins. The Truper wheel here is 3/4 inch thick and listed for grinding and rectifying, while the YKLP cutting discs are 0.1 cm thick and listed for fast burr cutting. The bench wheels here run 60 grit, and the YKLP set includes 80 grit discs that the maker lists for heavier removal and sanding.

How to pick the size for the job

Start with the grinder, then the job. The grinder sets the diameter and the arbor, and the job sets the thickness and the grit.

  • Bench grinding and sharpening. A 6 inch wheel fits the bench grinders here; the WORKEASE set takes a 1/2 inch arbor and the Truper wheel takes a 1 inch arbor with adapters for smaller spindles. 60 grit suits sharpening drill bits, knives and blades.
  • Carbide tools and non-ferrous metal. A silicon carbide wheel suits tungsten carbide tools, bronze, brass and copper, and the Truper wheel adds adapters for 1/2, 5/8 and 3/4 inch spindles.
  • Small cutting and sanding. A 3 inch disc set suits a mini angle grinder, with cutting discs for thin stock and flap discs for heavier removal and sanding.
  • Rust removal and polishing. A wire wheel strips burrs and rust, and a buffing wheel with polishing paste finishes the metal.

Side by side

Truper PIES-63460T YKLP 3 inch Disc Set WORKEASE 4Pcs Wheel Set
Diameter 6 inch 3 inch 6 inch
Arbor hole 1 inch Not stated 1/2 inch
Thickness 3/4 inch 0.1 cm cutting discs Not stated
Grit 60 grit 80 grit flap discs 60 grit
Pack 1 wheel 20 pieces 4 pieces
Use Tungsten carbide tools, bronze, brass, copper Metal, wood, stainless steel Stainless steel, aluminum, copper, titanium, carbide

The two bench wheels share a 6 inch diameter and 60 grit, and they differ on arbor and pack. The WORKEASE thickness is not stated. The mini set trades diameter for count: 20 pieces across four disc types for a 3 inch grinder.

The gear for the job

Each set below fits a step in the sizing answer above: diameter and arbor for the bench grinder, and a small disc set for the mini angle grinder.

Grinder safety. Grinding throws sparks and grit, so wear eye and face protection, clamp the work, keep guards in place, and keep gloves away from rotating parts. Check the wheel for cracks before mounting, and match the wheel rating to the grinder. See the best respirator for grinding metal guide for dust protection.

For more options, see our metal fab tools guides.

FAQ for welders

What size grinding wheel fits a bench grinder?

The bench sets here take a 6 inch wheel. The WORKEASE set takes a 1/2 inch arbor, and the Truper wheel takes a 1 inch arbor with adapters for 1/2, 5/8 and 3/4 inch spindles. Check the diameter and the arbor hole on the grinder before ordering, and keep the guard on.

How do I match the arbor hole?

Match the wheel arbor hole to the spindle on the grinder. A 1/2 inch arbor wheel mounts on a 1/2 inch spindle, and the Truper wheel includes adapters so a 1 inch hole fits smaller spindles. Never force a wheel onto a spindle it does not fit.

What does grit mean on a grinding wheel?

Grit describes the abrasive on the wheel. The bench wheels here run 60 grit, and the YKLP set includes 80 grit discs that the maker lists for heavier removal and sanding. Match the grit to the job the wheel has to do.

Can I use a 3 inch disc on a bench grinder?

No. A 3 inch disc is made for a mini angle grinder, and the bench sets here take a 6 inch wheel. A disc that does not match the grinder diameter and arbor will not mount safely.

What thickness should a grinding wheel be?

It depends on the job. The Truper wheel here is 3/4 inch thick and listed for grinding and rectifying, while the YKLP cutting discs are 0.1 cm thick and listed for fast burr cutting. Check the thickness the job needs before ordering, and never use a cutting disc for side grinding.

Related: grinding wheel types, flap disc vs grinding wheel, best grinding disc for metal, and sanding disc vs grinding wheel.

More buying guides

Metal Fab Tools ·

Grinding Wheel Dresser How to Use

A grinding wheel dresser cleans, trues and opens a glazed wheel, and this guide shows the steps with a diamond dresser, a dressing stick…

Metal Fab Tools ·

Grinding Wheel Types: Which Disc to Use

Grinding wheel types cover cutting, grinding, blending and finishing, and the disc shape decides which job it suits; this guide matches each type to…