Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Grinding Wheel Types: Which Disc to Use

Grinding wheel types cover cutting, grinding, blending and finishing, and the disc shape decides which job it suits; this guide matches each type to the work and compares four packs from current listings.

Grinding Wheel Types: Which Disc to Use
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1WORKPRO 10-Pack Zirconia Flap DiscsWORKPRO 10-Pack Zirconia Flap Discs9.6/10View on Amazon
  2. 2WORKPRO 4-1/2 x 7/8 Inch Cut-Off WheelsWORKPRO 4-1/2 x 7/8 Inch Cut-Off Wheels9.6/10View on Amazon
  3. 3Mixiflor 20 Pcs 5 Sizes 60/80/120/240 GritsMixiflor 20 Pcs 5 Sizes 60/80/120/240 Grits9.6/10View on Amazon
  4. 4PRETEC 26 Packs Angle Grinder Cutting FlapPRETEC 26 Packs Angle Grinder Cutting Flap9.5/10View on Amazon

A weld bead sits proud of the joint, a length of flat bar needs cutting to size, and a bevel has to go on an edge before the next pass. Each of those jobs wants a different disc on the grinder, and the wrong disc makes the work slow and rough. Grinding wheel types split into cut-off wheels, grinding wheels, flap discs and flap wheels, and this guide shows what each one does, how to match it to the grinder, and which packs suit shop work.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

WORKPRO 10-Pack Zirconia Flap Discs

WORKPRO 10-Pack Zirconia Flap Discs

WORKPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 pack of 4-1/2 inch zirconia flap discs in 40 grit, rated to 13,000 RPM, for heavy stock removal and blending on metal.

Pros

  • Zirconia alumina flaps last longer than standard aluminum oxide, per the listing
  • T29 angled flaps suit edge work and contoured surfaces
  • Fiberglass backing plate absorbs vibration and holds a strong bond
  • Rated to 13,000 RPM for 4-1/2 inch grinders

Cons

  • No warranty term is stated
  • Only 40 grit in the pack, so no finer finish option
  • Part number W124780 and model W124781A do not match
  • A 10 pack runs out sooner than the 20 packs here on long jobs
WORKPRO 4-1/2 x 7/8 Inch Cut-Off Wheels

WORKPRO 4-1/2 x 7/8 Inch Cut-Off Wheels

WORKPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20 pack of thin 4-1/2 inch cut-off wheels for metal and stainless steel, rated to 13,000 RPM with a double fiberglass mesh.

Pros

  • 3/64 inch thin profile cuts fast with minimal material loss
  • Double fiberglass mesh reinforcement for a longer service life
  • Rated to 13,000 RPM and 80M/S
  • Lists carbon steel, stainless steel, pipe, iron and copper

Cons

  • No warranty term is stated
  • Part number W124620AU and model W124620A do not match
  • Cutting only, with no grinding or blending use stated
  • 20 discs in one pack, with no smaller pack option stated
Mixiflor 20 Pcs 5 Sizes 60/80/120/240 Grits

Mixiflor 20 Pcs 5 Sizes 60/80/120/240 Grits

Mixiflor9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20 piece set of shank-mounted flap wheels in five sizes and four grits, for a drill or die grinder on contoured surfaces.

Pros

  • Five sizes and four grits cover rough shaping through fine finishing
  • 1/4 inch shank fits hand drills, electric drills, air drills and die grinders
  • Aluminum oxide grain removes rust and corrosion and deburrs metal, wood, plastic and ceramic
  • Soak in water before use to reduce dust and prolong service life, per the listing

Cons

  • No warranty term is stated
  • No top speed rating stated for the wheels
  • Shank mount only, so no use on an angle grinder
  • One wheel per grit per size, so a worn 240 grit wheel has no spare in the same size
PRETEC 26 Packs Angle Grinder Cutting Flap

PRETEC 26 Packs Angle Grinder Cutting Flap

PRETEC9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 26 pack that bundles cut-off wheels, flap discs and grinding wheels in 5 inch and 4-1/2 inch sizes for steel prep.

Pros

  • Three disc types in one pack cover cutting, grinding and blending
  • 20 cut-off wheels suit long cutting sessions
  • 60 grit flap discs for blending after cutting
  • Each disc type is wrapped with its own kind, per the listing

Cons

  • No warranty term is stated
  • No top speed rating stated for any disc in the kit

Grinding wheel types in one paragraph

A cut-off wheel is a thin bonded disc that slices through metal. A grinding wheel is a thicker bonded disc that removes stock and shapes an edge. A flap disc is a backing plate covered in overlapping abrasive flaps that grinds and blends in one pass. A flap wheel is a drum of abrasive flaps on a shank that fits a drill or die grinder and finishes contoured surfaces. The types differ in shape, thickness and tool, and the listings here show each one in a pack a home shop can keep on the shelf.

Side by side

WORKPRO 40 Grit Flap Disc WORKPRO 20 Pack Cut-Off Wheel Mixiflor 20 Pc Flap Wheel Set PRETEC 26 Pack 3 in 1 Kit
Disc type Flap disc Cut-off wheel Flap wheel Cut-off, flap and grinding
Size 4-1/2 inch 4-1/2 inch 1 to 2.36 inch widths 5 inch, flap discs 4-1/2 inch
Grit 40 grit Not stated 60, 80, 120 and 240 grit 60 grit flap discs
Pack size 10 20 20 26
Max speed 13,000 RPM 13,000 RPM Not stated Not stated
Arbor / shank 7/8 inch 7/8 inch 1/4 inch shank 7/8 inch

Arbor size decides fit before anything else. The discs in this guide list a 7/8 inch arbor, and the flap wheel lists a 1/4 inch shank for a drill or die grinder, so check the tool before ordering a pack.

When a cut-off wheel is the better choice

  • Slicing bar, tube and sheet. A thin wheel cuts fast with a narrow kerf and little material loss.
  • Cutting stainless and carbon steel. The WORKPRO cut-off wheel lists carbon steel, stainless steel, pipe, iron and copper.
  • Flush cuts in tight spots. A thin disc reaches where a thicker wheel cannot.
  • Many cuts in a row. A 20 pack keeps spare discs on hand for a long cutting session.

See the best 4 1/2 inch cut off wheels roundup for more packs in this size.

When a flap disc is the better choice

  • Blending a weld bead. Flaps grind the bead down and smooth the surface in one pass.
  • Removing rust. The WORKPRO flap disc lists rust removal on metal surfaces.
  • Edge work and contours. Angled T29 flaps suit edge work and uneven surfaces, per the listing.
  • Finishing after a cut. A 60 grit flap disc takes the sharp edge off a fresh cut.

The flap disc vs grinding wheel comparison covers the trade-off between the two in more detail.

How to match the disc to the grinder

Match three things: disc diameter, arbor size and the top speed rating of the grinder. The angle grinder discs here run 4-1/2 inch and 5 inch, with a 7/8 inch arbor, and two listings state a top speed of 13,000 RPM. A disc rated below the speed of the grinder has no place on that grinder. Check the label on the disc and the rating plate on the grinder before mounting anything.

The gear that covers the jobs

Cutting, grinding, blending and finishing each need a disc shape of their own, and the packs below cover those steps with the sizes and grits the listings state.

Sparks, dust and a loose disc. Grinding throws sparks and dust, and a cracked disc can come apart at speed. Wear safety glasses and a face shield, keep the guard on, and check each disc for cracks before mounting it.

For more options, see our metal fab tools guides.

FAQ for welders

Can a cut-off wheel grind?

A cut-off wheel is built thin for slicing, and the WORKPRO wheel here measures 3/64 inch thick. Grinding on its side loads a thin wheel the wrong way, so use a grinding wheel or a flap disc for shaping and stock removal.

What grit flap disc suits general shop work?

The listings here show 40 grit and 60 grit flap discs. The coarser 40 grit removes stock faster, while 60 grit leaves a smoother finish after blending a bead.

Do flap wheels fit an angle grinder?

No. The Mixiflor flap wheels (on Amazon) in this guide have a 1/4 inch shank for a drill or die grinder. They suit contoured wood, metal and plastic surfaces and clean-up work on welds and cuts, per the listing.

How do I pick the right arbor size?

Check the arbor on the grinder and match the disc to it. The discs in this guide list a 7/8 inch arbor, and the flap wheel lists a 1/4 inch shank, so the tool decides which pack fits.

Can I use a 5 inch disc on a 4-1/2 inch grinder?

Match the disc diameter to the grinder. A 5 inch disc on a 4-1/2 inch grinder overhangs the guard, so buy the size the grinder is made for and check the guard and the label before mounting a disc.

Related: cut off wheel vs flap disc, best grinding disc for metal, best 4 1/2 grinding wheels, and flap disc for angle grinder. Also see the best angle grinder for cutting metal roundup.

More buying guides

Metal Fab Tools ·

Grinding Wheel Dresser How to Use

A grinding wheel dresser cleans, trues and opens a glazed wheel, and this guide shows the steps with a diamond dresser, a dressing stick…

Metal Fab Tools ·

Grinding Wheel Size Guide

Grinding wheel size means diameter, arbor, thickness and grit, and each has to match the grinder and the job; this guide matches three sets…