Grinding Wheel Uses and Which Wheel to Buy
A thin wheel cuts, a thick wheel grinds and a flap disc blends, and this guide compares 4 sets on the mix of wheels inside.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
KingTool 31pcs Grinding & Cutting Wheels 4 1/29.6/10View on Amazon - 2
PRVEW 27-Pack 4 1/2 Inch Cut Off Wheels Grinding9.5/10View on Amazon - 3
KingTool 27pcs Angle Grinder Wheel Set9.5/10View on Amazon - 4
LotFancy Angle Grinder Sanding Disc for Metal9.4/10View on Amazon
A weld bead stands proud of the joint, a cut edge needs trimming, and a rusted bracket needs cleaning back to bare metal. Grinding wheel uses come down to matching the wheel to the job: a thin wheel cuts, a thick wheel grinds, and a flap disc blends the edge smooth. This guide covers each use and the sets in this guide, from cut-off wheels to flap discs.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

KingTool 31pcs Grinding & Cutting Wheels 4 1/2
A KingTool 31-piece set with 25 cut-off wheels, 3 depressed-center grinding wheels and 3 P80 flap discs, in a sturdy carrying case.
Pros
- 25 cut-off wheels, the most here, in 3/64-inch ultra-thin design
- Cutting wheels are CE and ISO certified
- 3 P80 flap discs in Type 29 bevel build for contours, edge and weld blending
- Sturdy carrying case for easy transport
Cons
- No warranty term is stated in the listing
- No weight is stated in the listing
- Only 3 grinding wheels, against 5 in the KingTool 27-piece set

PRVEW 27-Pack 4 1/2 Inch Cut Off Wheels Grinding
A PRVEW 27-pack with 20 cut-off wheels, 3 grinding wheels and 4 zirconia flap discs in 40, 60 and 80 grit for metal and stainless steel.
Pros
- 20 cut-off wheels in 3/64-inch ultra-thin design for fast burr-free cutting
- 4 flap discs in 40, 60 and 80 grit, the widest grit spread of the cutting sets
- Grinding wheels use A24T aluminum oxide for aggressive grinding and high stock removal
- Rated for grinders with a rotating speed up to 13,300 RPM and 80M/S
Cons
- No warranty term is stated in the listing
- No certification is stated in the listing
- No weight is stated in the listing
- Only 3 grinding wheels, against 5 in the KingTool 27-piece set

KingTool 27pcs Angle Grinder Wheel Set
A KingTool 27-piece set with 20 cut-off wheels, 5 grinding wheels and 2 P80 flap discs in a sealed PP toolbox.
Pros
- 5 grinding wheels, the most here
- 20 cut-off wheels in 3/64-inch ultra-thin design
- Sealed PP toolbox protects the wheels from time and humidity, per the listing
- Rated for grinders with a rotating speed up to 13,300 RPM and 80M/S
Cons
- No warranty term is stated in the listing
- No certification is stated in the listing
- Only 2 flap discs
- Both flap discs are P80, with no finer grit listed

LotFancy Angle Grinder Sanding Disc for Metal
A LotFancy 11-pack of sanding and polishing discs in 40, 60, 80 and 120 grit, with a strip disc and nylon and felt polishing discs for metal and wood.
Pros
- Grits from 40 to 120, the widest spread here
- Strip disc removes rust, paint and coatings without damaging the original surface
- Nylon and felt discs for polishing and finishing
- Lists metal, wood, glass, jewelry, plastic, ceramics and marble as uses
Cons
- No cut-off wheels are listed
- No rotating speed is stated in the listing
- No warranty term is stated in the listing
Grinding Wheel Uses: Match the Wheel to the Job
A cut-off wheel is the thin wheel. The cutting sets here use 3/64-inch ultra-thin cut-off wheels for fast burr-free cutting with minimal material loss, in metals and stainless steel. The thin wheel takes off less material, so the cut stays precise and the wheel moves through the metal fast.
A grinding wheel is the thick wheel. The cutting sets here use 1/4-inch depressed-center grinding wheels with A24T aluminum oxide grains for aggressive grinding and high stock removal. That is the wheel for taking metal off fast after the cut.
A flap disc is the blending wheel. The cutting sets here use Type 29 bevel discs in industrial-grade premium zirconia, effective for contours, edge and weld blending, and radius grinding. Grit sets the finish: the PRVEW flap discs (on Amazon) run 40, 60 and 80 grit, and the LotFancy set runs 40, 60, 80 and 120 grit, so a coarse disc blends the weld and a fine disc finishes the surface.
A strip disc and a polishing disc finish the job another way. The LotFancy strip disc (on Amazon) removes rust, paint and coatings without damaging the original surface, and its nylon and felt discs polish and finish. That set is the only one here that lists wood, glass, jewelry, plastic, ceramics and marble alongside metal.
| Gear Score | Cutting | Grinding | Flap discs | |
|---|---|---|---|---|
| KingTool 31-Pc Set | 9.6/10 | 25 cutting wheels | 3 grinding wheels | 3 P80 flap discs |
| PRVEW 27-Pack | 9.5/10 | 20 cutting wheels | 3 grinding wheels | 4 flap discs, 40, 60, 80 grit |
| KingTool 27-Pc Set | 9.5/10 | 20 cutting wheels | 5 grinding wheels | 2 P80 flap discs |
| LotFancy 11-Pack | 9.4/10 | None stated | None stated | Assorted 40, 60, 80, 120 grit |
The chart above ranks the sets by Gear Score, with the count of each wheel type beside each one. The KingTool 31-piece set leads on cut-off wheels and certification, while the PRVEW pack has the widest flap disc grit spread of the cutting sets and the KingTool 27-piece set leads on grinding wheels.
The Wheel Sets in This Guide
Each set below covers a different mix: the KingTool 31-piece set for cutting, the PRVEW pack for blending, the KingTool 27-piece set for grinding, and the LotFancy pack for sanding and polishing.
Before You Grind
Check the arbor and the speed before the wheel goes on. All 4 sets here are 4-1/2 inch with a 7/8 inch arbor, and the PRVEW and KingTool 27-piece sets list a rotating speed up to 13,300 RPM and 80M/S. Clamp the work, keep the guard in place, wear eye and face protection, and keep gloves clear of the rotating wheel.
FAQ for welders
What is the difference between a cutting wheel and a grinding wheel?
Thickness and job. The cutting wheels here are 3/64-inch ultra-thin for fast burr-free cutting with minimal material loss, while the grinding wheels are 1/4-inch depressed-center wheels with A24T aluminum oxide for aggressive grinding and high stock removal. Use the thin wheel to cut and the thick wheel to take metal off.
What grit flap disc should I start with?
Start coarse and step finer. The PRVEW flap discs run 40, 60 and 80 grit, and the LotFancy set runs 40, 60, 80 and 120 grit. A 40-grit disc blends a weld fast, and the finer grits finish the surface.
Will these wheels fit my angle grinder?
Check the diameter and the arbor. All 4 sets here are 4-1/2 inch with a 7/8 inch arbor, and the LotFancy listing says its discs fit most 4.5 inch angle grinders. The PRVEW and KingTool 27-piece sets list a rotating speed up to 13,300 RPM and 80M/S, so check the grinder against that figure.
Can I use these grinding wheels on wood?
Only the LotFancy set lists wood. Its set covers metal, wood, glass, jewelry, plastic, ceramics and marble. The other 3 sets list metal and stainless steel only, so keep them to metal.
Related: sizes of angle grinders, angle grinder safety, grinding wheel types and the metal fab tools hub.




