Angle Grinder Safety: Guards, Discs and Protective Gear
Angle grinder safety starts with the guard: match it to the wheel size, check the disc, and wear eye, hearing and hand protection.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
HERZO Dust Shroud Dust Extraction Cutting Guard for 5 inch9.5/10View on Amazon - 2
3Pcs Angle Grinder Guard9.6/10View on Amazon
A grinder throws sparks across the bench when the disc bites into steel, and the guard stands between the spinning disc and your hands and face. Angle grinder safety starts with that guard: the right guard for the wheel, fitted the right way, plus the gear that protects your eyes, ears and hands. This guide walks through the guard, the disc and the protective gear, in the order you check them.
Other welders and gear to compare
Ryobi 5133001903 R18AG-0 One+ Cordless Angle Grinder AngledCheck price on Amazon
HERZO Dust Shroud for Angle Grinder 4/4.5/5 inch UniversalCheck price on Amazon
Makita 9557PBX1 4-1/2" Paddle Switch Cut-Off/Angle GrinderCheck price on Amazon
DEWALT Angle GrinderCheck price on Amazon
Bosch GWS8-45 4-1/2 In. Angle GrinderCheck price on Amazon
SKIL 6 Amp 4-1/2-Inch Corded Angle GrinderCheck price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Angle grinder safety: start with the guard
The guard sits between the disc and the user, and it deflects sparks and debris away from the body. The Askoppo listing states its guard is built to deflect hot metal sparks and debris away from the user, and the HGC listing states its guard shields users from hot metal sparks, flying debris and dust during cutting, grinding and polishing. A guard also keeps fingers away from the edge of the disc. Check the guard before you fit a disc: it should sit firm on the grinder with the opening turned away from you.
Side by side
| HERZO dust shroud | Askoppo replacement guard | soujkooy cover set | Jiozermi cover | |
|---|---|---|---|---|
| Fits | 4-1/2 and 5 inch grinders | 4, 4-1/2, 5, 5.3 and 6 inch wheels | 4, 5 and 6 inch grinders | 115 type grinders |
| Material | PVC | Iron | Iron | Metal |
| Install | Easy steps, spanner in the box | Keyless, no extra tools | Screws and nuts | Screws and nuts |
| Pack | 1 shroud, 1 spanner, 1 disc, 4 clamp fittings | 1 guard | 3 pieces | 2 pieces |
| Gearcase | Not stated | 1.65 inch smooth collar only | Not stated | 1.7 inch ring inner diameter |
The guards in the listings cited differ in fit, material and pack. HERZO makes a dust shroud for 4-1/2 and 5 inch grinders, Askoppo makes a replacement guard for 4, 4-1/2, 5, 5.3 and 6 inch wheels, soujkooy makes a set of 3 covers for 4, 5 and 6 inch grinders, and Jiozermi makes a set of 2 covers for 115 type grinders. Match the guard to the wheel size and the grinder collar before you buy.
Match the guard to the grinder
Wheel size decides the guard. The HERZO shroud (on Amazon) suits 4-1/2 and 5 inch grinders, the Askoppo guard (on Amazon) takes 4, 4-1/2, 5, 5.3 and 6 inch wheels, and the soujkooy covers (on Amazon) fit 4, 5 and 6 inch grinders. The collar matters too: the Askoppo guard fits a standard 1.65 inch smooth cylindrical gearcase, and the listing warns it does not fit grinders with notched, fluted or lugged mounting flanges. The Jiozermi cover (on Amazon) lists a ring inner diameter of 1.7 inch and an outer diameter of 5 inch. Measure the wheel and the collar, then match them to the listing before you order.
Check the disc before you fit it
A disc with a crack or a chip can break apart at speed, so look it over before it goes on the grinder. Check the edge and faces for cracks, chips and missing pieces, and check that the disc size matches the guard. The HERZO shroud comes with 1 cutting disc in the box, with 1 spanner and 4 clamp fittings. If the disc shows damage, swap it for a fresh disc and check the guard again.
Wear the protective gear
Grinding throws sparks, chips and dust, so wear gear that covers the eyes, ears and hands. Safety glasses guard the eyes from chips and sparks, gloves protect the hands from hot metal and sharp edges, and hearing protection helps on long grinding sessions. A face shield adds cover for the face. See the safety glasses guide and the welding gloves for grinding guide for the gear that fits the job.
Set up the work area
Sparks travel, so clear the area before the grinder starts. Move dry grass, rags, paper and anything flammable away from the work, and keep a clear space around the bench. Clamp the workpiece so it cannot move while you cut or grind, and keep the cord clear of the disc and the work. Grind with good ventilation or outdoors, and keep your head out of the dust.
Grinding sparks and dust. Grinding makes sparks, hot chips and dust. Grind with good ventilation or outdoors and keep your head out of the dust, wear safety glasses and hearing protection, and clear dry grass and anything flammable from the area.
FAQ for welders
Do I need the guard on my angle grinder?
Yes. The guard sits between the disc and the user and deflects sparks and debris away from the body. The Askoppo and HGC listings state their guards deflect sparks and debris, so keep the guard fitted and turned away from you.
How do I know which guard fits my grinder?
Match the wheel size and the collar. The HERZO shroud suits 4-1/2 and 5 inch grinders, the Askoppo guard fits 4, 4-1/2, 5, 5.3 and 6 inch wheels on a 1.65 inch smooth gearcase, and the soujkooy covers fit 4, 5 and 6 inch grinders. Check the wheel size and the collar on the listing before you buy.
Can I use a guard from another brand?
Only if the listing states the fit. The Askoppo guard lists DeWALT, Milwaukee, Bosch, Metabo and RYOBI, and warns it does not fit grinders with notched, fluted or lugged mounting flanges. Check the collar on your grinder against the listing.
What should I check on the disc before grinding?
Look for cracks, chips and missing pieces on the edge and faces, and check that the disc size matches the guard. If the disc shows damage, swap it for a fresh disc. The HERZO shroud comes with 1 cutting disc, 1 spanner and 4 clamp fittings in the box.
What protective gear do I wear with an angle grinder?
Safety glasses for the eyes, hearing protection for the ears, and gloves for the hands. A face shield adds cover for the face, and the guard stays fitted while you work.
Related: best angle grinder, angle grinder parts, angle grinder uses, flap disc for angle grinder and the welding safety gear hub.




