Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Graphite vs Clay Crucible: Which One Should You Buy?

Graphite and clay crucibles both melt non-ferrous metals, and three of the four listings state the same 1800 °C top temperature; furnace type and spout decide more.

Graphite vs Clay Crucible: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Nelyrho 6KG Graphite Crucible with Pouring Spout for MeltingNelyrho 6KG Graphite Crucible with Pouring Spout for MeltingView on Amazon
  2. 2Nelyrho #1-1.3KG Graphite Crucible with Pouring Spout forNelyrho #1-1.3KG Graphite Crucible with Pouring Spout forView on Amazon
  3. 3Nelyrho 3KG Graphite Crucible with Pouring Spout for MeltingNelyrho 3KG Graphite Crucible with Pouring Spout for MeltingView on Amazon
  4. 4Nelyrho #0.5-0.5KG Graphite Crucible for Melting MetalNelyrho #0.5-0.5KG Graphite Crucible for Melting MetalView on Amazon
  5. 5CANALHOUT 3.5Kg Graphite Crucible w/Pouring Spout for MeltingCANALHOUT 3.5Kg Graphite Crucible w/Pouring Spout for MeltingView on Amazon
  6. 6CANALHOUT 1.5Kg Graphite Crucible w/Pouring Spout for MeltingCANALHOUT 1.5Kg Graphite Crucible w/Pouring Spout for MeltingView on Amazon

A crucible holds molten metal, and the material it is made from decides how hot it can run, what furnace it can sit in, and how long it lasts. Graphite vs clay crucible is a choice between a graphite crucible and a clay graphite crucible, and the listings here show both sides. This guide sets out the material, the heat limits, the pouring spout and the furnace type, using the listings’ own figures.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Graphite vs clay crucible: the difference in one paragraph

The difference is the material. A graphite crucible here is graphite; the Nelyrho and CANALHOUT listings state silicon carbide graphite, a hard, dense material that carries heat fast and holds up at high temperature. A clay graphite crucible mixes clay with graphite, which the QNK listing describes as high density clay graphite with high thermal conductivity. Both melt the same non-ferrous metals, aluminum, gold, silver, copper and brass, and three of the four listings state a pouring spout. The choice is furnace type first, then size and spout.

Side by side

Graphite crucible Clay graphite crucible Notes
Material Silicon carbide graphite (Nelyrho, CANALHOUT); graphite (TOAUTO) Clay graphite Nelyrho, CANALHOUT and TOAUTO list graphite; QNK lists clay graphite
Top temperature 1800 °C (3272 °F) on Nelyrho and CANALHOUT; 3200 °F or 5000 °F on TOAUTO 1800 °C (3300 °F) TOAUTO states 3200 °F and 5000 °F by furnace type; QNK states 3300 °F for the same 1800 °C
Pouring spout Stated on Nelyrho and CANALHOUT Stated on QNK TOAUTO states no spout
Capacity 1KG to 6KG 6kg Nelyrho states 6KG; CANALHOUT states 3.5Kg; TOAUTO states 1kg, 2kg and 3KG
Coal and charcoal heat TOAUTO warns graphite oxidizes and cracks Not stated Nelyrho and CANALHOUT list coal stoves as a use
Service life 2 to 5 times longer than clay, per CANALHOUT Not stated The claim is CANALHOUT’s, not a measured figure
Warranty 1 Year stated by CANALHOUT and TOAUTO 1 year stated by QNK Nelyrho states no warranty term

The table lines up the two materials from what the listings state. Where the listings disagree, the note says so: the QNK states the same 1800 °C as 3300 °F while the Nelyrho and CANALHOUT state it as 3272 °F, and the CANALHOUT listing gives two different sizes, so its size stays unclear.

When graphite is the better choice

  • Propane or gas heat. Nelyrho lists propane melting furnaces, gas furnaces, kilns and ovens as uses, and CANALHOUT lists fuel furnaces, kilns and natural gas furnaces.
  • Longer life, per the makers. CANALHOUT claims 2 to 5 times longer life than a normal clay crucible, and Nelyrho claims longer service life than standard clay crucibles.
  • A pouring spout. Nelyrho and CANALHOUT both state a pouring spout.
  • Electric or gas protection heat. TOAUTO states its graphite crucible withstands 3200 °F in an air electric furnace and 5000 °F in a vacuum or gas protection furnace.

Our best propane forge for blacksmithing roundup covers five propane forges.

When clay graphite is the better choice

  • The clay graphite mix. QNK lists a high density clay graphite crucible with high thermal conductivity, strong oxidation and corrosion resistance, and high thermal shock resistance.
  • The same metals. QNK lists gold, silver, copper, aluminum and brass, at the 1800 °C it states.
  • A stated warranty. QNK states 1 year, the same term CANALHOUT and TOAUTO state on the graphite side.
  • A plainly stated size. QNK states 6KG and 4.8 inches by 4.8 inches by 6.1 inches, with no second size to sort out.

The four crucibles in the listings

Nelyrho 6KG graphite. The Nelyrho is a silicon carbide graphite crucible with a pouring spout, rated to 1800 °C (3272 °F). It states a 6KG capacity, approx. 700ml, 5.9 inches high and 4.7 inches wide, and it weighs 3.2 pounds. It lists aluminum, gold, silver, copper and brass, and it claims longer service life than standard clay crucibles.

CANALHOUT 3.5Kg graphite. The CANALHOUT is a silicon carbide crucible with a pouring spout, rated to 1800 °C (3272 °F). It states a capacity of 400ML, an inner diameter of 82MM, an outer diameter of 103MM and a height of 121MM, and it claims 2 to 5 times longer life than a normal clay crucible. Its spec table states 8.46 inches by 10.24 inches by 8.46 inches, which does not match the bullet figures, so the listing leaves the size unclear. It states a 1 Year warranty.

TOAUTO 3KG graphite. The TOAUTO is a grooved graphite crucible in 1kg, 2kg and 3kg sizes. The 3KG size states a diameter of 75mm, a height of 170mm and a size of 335ML, and the listing states a weight of 330 to 465g. It states no pouring spout. It states a 1-year warranty, a 30-day return and lifetime technical support.

QNK #6 6kg clay graphite. The QNK is a clay graphite crucible with a spout, rated to 1800 °C (3300 °F). It states 6KG and 4.8 inches by 4.8 inches by 6.1 inches. It lists gold, silver, copper, aluminum and brass, and it states a 1 year warranty.

Heat limits and furnace type

Three of the four listings state the same top temperature, 1800 °C, but they write it differently: Nelyrho and CANALHOUT state 3272 °F, while QNK states 3300 °F. TOAUTO states no 1800 °C figure. Treat the Celsius figure as the shared one for the three listings that state it, and read the Fahrenheit figure as each listing states it.

The furnace matters more than the top temperature. TOAUTO warns that a graphite crucible can not be heated by a carbon furnace or charcoal kiln, because it oxidizes and cracks, usually starting to oxidize at 752 °F (400 °C). The same listing states its crucible withstands 3200 °F in an air electric furnace and 5000 °F in a vacuum or gas protection furnace. Nelyrho and CANALHOUT list coal stoves and coke ovens as uses, so the listings disagree on coal and charcoal heat: follow the warning for the crucible you buy, and match the furnace to what its own listing states.

Melt outdoors or with strong ventilation, with dry tools and molds only, a full face shield and leather PPE, and never melt unknown or sealed scrap.

FAQ for welders

Is a graphite crucible better than a clay crucible?

For the listings here, graphite claims the longer life: CANALHOUT claims 2 to 5 times longer life than a normal clay crucible, and Nelyrho claims longer service life than standard clay crucibles. Three of the four listings state the same top temperature, 1800 °C, and all four melt aluminum, gold, silver, copper and brass. The furnace type decides more than the material: TOAUTO warns graphite oxidizes and cracks in a carbon furnace or charcoal kiln.

Can a graphite crucible be used in a charcoal forge?

Not per the TOAUTO listing: it warns that a graphite crucible heated by a carbon furnace or charcoal kiln oxidizes and cracks, usually starting to oxidize at 752 °F (400 °C). Nelyrho and CANALHOUT list coal stoves and coke ovens as uses, so the listings disagree. Match the furnace to what the listing for the crucible you buy states, and use a propane or gas furnace where the listing lists one.

How hot can a graphite crucible get?

Nelyrho and CANALHOUT state 1800 °C (3272 °F) for their silicon carbide graphite crucibles. TOAUTO states its graphite crucible withstands 3200 °F in an air electric furnace and 5000 °F in a vacuum or gas protection furnace. Treat the top figure as a peak for the furnace type the listing states.

What size crucible do I need?

Size it by the melt and the furnace chamber: the listings here state 1kg, 2kg, 3KG, 3.5Kg and 6KG capacities, with the Nelyrho 6KG stating approx. 700ml and the CANALHOUT 3.5Kg stating 400ML. Check the height and diameter the listing states against the furnace chamber, and remember the CANALHOUT listing gives two different sizes, so its size stays unclear.

Do crucibles come with a warranty?

Three of the four listings state one: CANALHOUT states 1 Year, TOAUTO states a 1-year warranty with a 30-day return, and QNK states 1 year. Nelyrho states no warranty term. A warranty term is stated on the listing, not a promise about how long the crucible lasts in your furnace.

Related: our best forge burner kit for knife making roundup, our best forge refractory cement roundup, our gas forge vs coal forge guide, and the metal casting hub.

More buying guides