Best Gantry Crane Large (2026)
Five large gantry cranes for the shop, compared on capacity, height range, width, included hoist and trolley, and build, plus who should skip each.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBSMTEK 3 Ton9.5/10View on Amazon - 2
Best Electric HoistVEVOR 2200 lb9.5/10View on Amazon - 3
Best WidthPOXURIO 3T9.5/10View on Amazon - 4
Best Rigging KitMaxsa 2 Ton9.4/10View on Amazon - 5
Best Wide SpanSHAOMABA Crane9.3/10View on Amazon
Pulling an engine means lifting a heavy block out of a bay and setting it down on a stand without a second pair of hands, and a gantry crane is the shop tool for that lift. The best gantry crane large enough for the job spans the work, lifts the load straight up, and rolls out of the way when the job is done. This roundup scores five large cranes on what each listing states: capacity, height range, width, included hoist and trolley, and build.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall BSMTEK 3 Ton: 6600 lbs capacity, adjustable height 8.53 to 12.47 feet, steel I-beam frame and a triangular base. Check price on Amazon
- Best Electric Hoist VEVOR 2200 lb: 2200 lbs capacity with an electric hoist and manual trolley, height 95.7 to 142.9 inches. Check price on Amazon
- Best Width POXURIO 3T: 6600 lbs capacity with a 9.06 foot width, adjustable height and a manual trolley. Check price on Amazon
- Best Rigging Kit Maxsa 2 Ton: 4400 lbs capacity with a hoist, hooks, shackles and chain slings, height 8 to 11 feet. Check price on Amazon
- Best Wide Span SHAOMABA Crane: Wide-span design for vehicles and oversized cargo, adjustable height and rotating casters. Check price on Amazon
The machines

3 Ton Gantry Crane MAX6600LBS, Upgraded Trolley
A 3 ton crane with 6600 lbs capacity, adjustable height 8.53 to 12.47 feet, an 8.53 foot width and a steel I-beam frame.
Pros
- 6600 lbs capacity, 3 tons
- Adjustable height 8.53 to 12.47 feet
- Steel I-beam construction
- Triangular base for stability
Cons
- No hoist stated, trolley only
- No weight stated
- No warranty term stated
- No caster lock stated

VEVOR Adjustable Gantry Crane, 2200 lbs Capacity
A 2200 lbs crane with an electric hoist and manual trolley, height 95.7 to 142.9 inches, a sling and shackles included.
Pros
- Electric hoist and manual trolley included
- Sling and shackles included
- Height 95.7 to 142.9 inches
- Baked finish resists rust
Cons
- Lowest stated capacity here at 2200 lbs
- No warranty term stated
- No width stated
- 425.49 lb frame is heavy to move by hand

3T Gantry Crane, 6600LBS Adjustable Height
A 3T crane with 6600 lbs capacity, adjustable height 8.53 to 12.47 feet, a 9.06 foot width and a steel I-beam frame.
Pros
- 6600 lbs capacity, 3 tons
- Widest span here at 9.06 feet
- Adjustable height 8.53 to 12.47 feet
- Heavy-duty caster wheels
Cons
- No hoist stated, trolley only
- No weight stated
- No warranty term stated
- Few details beyond height and width

2 Ton Gantry Crane 8-11FT
A 2 ton crane with 4400 lbs capacity, height 8 to 11 feet, an 8.53 foot width, a hoist and a full rigging kit.
Pros
- Hoist, hooks, shackles and chain slings included
- 360 degree swivel casters that lock
- Manual trolley for load positioning
- Height 8 to 11 feet, width 8.53 feet
Cons
- 4400 lbs, less than the 3 ton cranes
- No warranty term stated
- Height tops out at 11 feet
- No caster size stated

Heavy Duty Mobile Gantry Crane
A wide-span gantry crane with adjustable height, rotating casters, a rust-resistant finish and a triangular base, for workshops and auto repair.
Pros
- Wide-span design for vehicles and cargo
- Adjustable height beam
- Fully rotating casters
- Triangular base for stability
Cons
- No capacity stated
- No height or width figures stated
- No hoist or trolley stated
- No weight or warranty stated
Spec sheet comparison
| Model | Gear Score | Capacity | Height range | Width | Weight | Warranty |
|---|---|---|---|---|---|---|
| BSMTEK 3 Ton | 9.5/10 | 6600 lbs | 8.53-12.47 ft | 8.53 ft | Not stated | Not stated |
| VEVOR 2200 lb | 9.5/10 | 2200 lbs | 95.7-142.9 in | Not stated | 425.49 lb | Not stated |
| POXURIO 3T | 9.5/10 | 6600 lbs | 8.53-12.47 ft | 9.06 ft | Not stated | Not stated |
| Maxsa 2 Ton | 9.4/10 | 4400 lbs | 8-11 ft | 8.53 ft | 477.3 lb | Not stated |
| SHAOMABA Crane | 9.3/10 | Not stated | Not stated | Not stated | Not stated | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (3 November 2026).
Buying guide: the best gantry crane large
Capacity
Capacities here run from 2200 lbs on the VEVOR to 6600 lbs on the BSMTEK and POXURIO, with 4400 lbs on the Maxsa. SHAOMABA states no capacity, so its lifting range is unknown. Match the capacity to the heaviest load you plan to lift, and keep the load well inside the stated figure.
Height and width
Height ranges here run from 8 to 11 feet on the Maxsa, 8.53 to 12.47 feet on the BSMTEK and POXURIO, and 95.7 to 142.9 inches on the VEVOR. Widths run from 8.53 feet on the BSMTEK and Maxsa to 9.06 feet on the POXURIO. SHAOMABA states a wide-span design with no figures. Measure the ceiling height and the width of the work before ordering, since a crane that does not fit the bay is useless.
Hoist and trolley
A hoist lifts the load and a trolley moves it along the beam. VEVOR includes an electric hoist with a manual trolley, plus a sling and shackles. Maxsa includes a hoist with hooks, shackles, chain slings and coupling links. BSMTEK and POXURIO list a manual trolley with a hook and shackles, with no hoist stated. SHAOMABA lists no hoist or trolley, so check the listing before ordering if you need a hoist in the box.
Mobility and base
All five cranes list casters or wheels for moving around the shop. Maxsa lists 360 degree swivel casters that lock, SHAOMABA lists fully rotating wheels, and BSMTEK lists removable legs and wheels for moving between job sites. Three listings cite a triangular base for stability: SHAOMABA, VEVOR and BSMTEK. Lock the casters before every lift.
Use as directed. Never exceed the stated capacity, never stand under a suspended load, and keep hands and feet clear of the load path. Check every bolt and shackle before lifting, and lock the casters before the load leaves the ground. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Check the capacity against the heaviest load: 6600 lbs on the BSMTEK and POXURIO, 4400 lbs on the Maxsa, 2200 lbs on the VEVOR.
- Check the height range against the ceiling: 8 to 11 feet on the Maxsa, 8.53 to 12.47 feet on the BSMTEK and POXURIO.
- Check the width against the work: 8.53 feet on the BSMTEK and Maxsa, 9.06 feet on the POXURIO.
- Check the box on arrival: VEVOR lists an electric hoist, sling and shackles, and Maxsa lists a hoist, hooks, shackles and chain slings.
- Check that the casters lock before the first lift, since a rolling crane under load is dangerous.
FAQ for welders
How much can a gantry crane lift?
It depends on the model. The BSMTEK and POXURIO list 6600 lbs, the Maxsa lists 4400 lbs, and the VEVOR lists 2200 lbs. SHAOMABA states no capacity. Match the stated capacity to the heaviest load you plan to lift, and keep the load well inside the stated figure.
What height gantry crane do I need?
Measure the ceiling and the tallest load. The Maxsa adjusts from 8 to 11 feet, the BSMTEK and POXURIO adjust from 8.53 to 12.47 feet, and the VEVOR adjusts from 95.7 to 142.9 inches. SHAOMABA states an adjustable height with no figures. Pick a range that clears the load with room to spare.
Do gantry cranes need a hoist?
A hoist does the lifting, so a crane without a hoist needs a hoist added. VEVOR includes an electric hoist, and Maxsa includes a hoist with its rigging kit. BSMTEK and POXURIO list a manual trolley with no hoist stated, and SHAOMABA lists no hoist or trolley. Check the listing before ordering if you need a hoist in the box.
Can I move a gantry crane with a load on it?
The listings here describe moving the crane around the shop on its casters, and Maxsa lists locking casters to hold it in place. Never move a crane with a load suspended: lower the load, then move the crane, then lift again. Lock the casters before every lift.
What is the difference between a gantry crane and an engine hoist?
A gantry crane spans the work on two legs with a beam across the top, so it lifts straight up over a bay or a vehicle. An engine hoist is a single-leg crane on wheels that reaches over an engine bay. For pulling an engine in a shop with room to span the bay, a gantry crane gives a steadier lift.
Related: metal fab tools, best shop crane electric, best steel workbench, welding table vs workbench, best welding table size, best welding vise for table, best heavy duty welding clamps, and the types of welding clamps.
Scoring, line by line
Each crane is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No safety certification and no warranty term is stated for any crane here, so every crane scores zero on both criteria; the ranking comes from the other three.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BSMTEK 3 Ton | 9.5 | 32 | 21 | 20 | 0 | 0 |
| VEVOR 2200 lb | 9.5 | 29 | 21 | 21 | 0 | 0 |
| POXURIO 3T | 9.5 | 32 | 20 | 19 | 0 | 0 |
| Maxsa 2 Ton | 9.4 | 29 | 21 | 19 | 0 | 0 |
| SHAOMABA Crane | 9.3 | 23 | 20 | 18 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.
BSMTEK leads on capacity at 6600 lbs with an adjustable height range. VEVOR is the pick for a shop that wants an electric hoist in the box, while POXURIO offers the widest span here. Maxsa suits a shop that wants a full rigging kit, and SHAOMABA suits a wide-span bay with no stated capacity to check against.




