Best Welding Vise for Table (2026): 5 Shop Picks Scored
Five welding vises for a table, compared on jaw width, throat depth, clamping force, base swivel rotation, and the mounting style each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVEVOR 6-Inch Bench Vise9.8/10View on Amazon - 2
Most Versatile MountingMYTEC 4.5-Inch 2-in-19.6/10View on Amazon - 3
Best Multi-Jaw with PadsSEDY 4.5-Inch Bench Vise9.5/10View on Amazon - 4
Most Compact Clamp-OnNuovoware 3-Inch Table Vise9.4/10View on Amazon
Tacking up square tubing, beveling plate or holding round pipe for a clean root pass demands a solid grip right at the bench edge. Finding the best welding vise for table fabrication means balancing jaw width, throat depth, mounting style and clamping force without cluttering your work surface. This guide compares five shop vises from listings on Amazon, scoring each on stated clamping specs, build materials, value and mounting flexibility.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall VEVOR 6-Inch Bench Vise: Forged from 60,000 PSI ductile iron with a 6-inch jaw width, 5.9-inch opening, 4496 lb clamping force, pipe jaws, and included M10 mounting bolts. Check price on Amazon
- Most Versatile Mounting MYTEC 4.5-Inch 2-in-1: Features a 2-in-1 base that bolts down or clamps onto tables up to 2.1 inches thick, with 2200 lbs of clamping force and a 270-degree swivel. Check price on Amazon
- Best Multi-Jaw with Pads SEDY 4.5-Inch Bench Vise: Offers a 4.5-inch jaw width, 2204 lb tensile rating, 240-degree swivel base, and included magnetic TPU jaw covers for finished workpieces. Check price on Amazon
- Most Compact Clamp-On Nuovoware 3-Inch Table Vise: A 3.6-pound cast iron vise with a 360-degree swivel base and up to 2.5-inch throat capacity that clamps directly onto bench edges. Check price on Amazon
The machines

VEVOR Bench Vise, 6-inch Jaw Width 5.9-inch Jaw
A 25-pound, 60,000 PSI ductile iron vise with a 6-inch jaw width, 4496-lb clamping force, pipe jaws, and included M10 mounting hardware.
Pros
- Forged from 60,000 PSI ductile iron with replaceable carbon steel serrated jaw plates
- Stated clamping force of up to 4496 lbs (20 kN) with a 3.5-inch throat depth
- Built-in pipe jaws clamp round stock from 0.6 to 2.9 inches in diameter
- Includes four M10 mounting bolts and nuts plus magnetic nylon jaw pads
Cons
- No warranty term is stated in the listing
- At 25 pounds, it requires a sturdy table top and permanent bolt-down mounting
- Requires drilling mounting holes if your welding table lacks matching bolt patterns

MYTEC 2-In-1 Work Bench Vise
A 4.5-inch cast steel vise with a 2-in-1 base that bolts down or clamps onto tables up to 2.1 inches thick with 2200 lbs of clamping force.
Pros
- Dual installation design allows permanent bolting or clamp-on mounting with a 2.1-inch base range
- Cast steel construction with a 2200-pound maximum working clamping force
- Built-in pipe jaws and flat jaws hold round and flat metal stock
- 270-degree swivel base and a polished flat anvil for light straightening
Cons
- No warranty term is stated in the listing
- Weight shows a minor discrepancy between 13 pounds in bullets and 6.52 kg in specs
- Throat depth of 2.0 inches limits how deep workpieces can sit between the jaws
- 2.1-inch base clamp range will not fit table edges thicker than 53 mm

Heavy Duty Bench Vise 4.5 Inch
A 4.5-inch multi-jaw bench vise with a 2204-lb tensile rating, 240-degree swivel base, and included magnetic TPU jaw covers.
Pros
- 4.5-inch jaw width with a 3-3/4 inch jaw opening and 2-11/32 inch throat depth
- Multi-jaw design grips both flat stock and round tubing
- Includes two 4-inch magnetic thermoplastic polyurethane jaw covers with diamond pattern
- 240-degree swivel locking base for setting work angles
Cons
- No warranty term is stated in the listing
- Gray iron body has lower stated tensile strength (2204 pounds) than ductile iron
- 240-degree swivel provides less rotational range than full 360-degree bases
- Listing does not include mounting bolts in the components list

Nuovoware Table Vise 3 Inch
A 3.6-pound clamp-on table vise with a 360-degree swivel base, 2.75-inch jaw width, and up to 2.5-inch throat capacity.
Pros
- Full 360-degree swivel base allows flexible positioning on the table edge
- Clamp-on design installs quickly on bench edges without drilling mounting holes
- Lengthened throat design provides up to 2.5 inches of throat capacity
- Cast iron body with chrome-plated spindle and quenched jaws
Cons
- No warranty term is stated in the listing
- Jaw width is 2.75 inches (70 mm) despite 3 Inch in the listing title
- Tensile strength is rated at 1500 pounds, the lowest stated capacity here
- Weighs only 3.6 pounds, making it suitable only for light fabrication and fit-up

Table Vise or Bench Vise 3.2 Inch
A portable clamp-on vise with a 4-inch base range and 360-degree swivel, though the listing shows conflicting jaw measurements.
Pros
- Clamp-on base accommodates workbench thicknesses up to 4 inches
- 360-degree swivel base allows rotation for various working angles
- Hardened and hammered cast steel jaws with non-slip textured gripping surface
- Compact 1.98 kg weight makes it portable across different workstations
Cons
- No warranty term is stated in the listing
- No clamping force or tensile strength rating is stated in the listing
Other welders and gear to compare
6-Inch Bench ViseCheck price on Amazon
2 PCS 3 Inches Bench ViseCheck price on Amazon
Bench ViseCheck price on Amazon
SYLPHID Bench Vise 3 Inch Heavy DutyCheck price on Amazon
Dual-Purpose Combined Universal Vise 3.3" with 360° SwivelCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Jaw width | Jaw opening | Throat depth | Mounting type | Material | Warranty |
|---|---|---|---|---|---|---|---|
| VEVOR 6-Inch Bench Vise | 9.8/10 | 6 in | 5.9 in | 3.5 in | Bolt-down (M10 bolts included) | 60,000 PSI ductile iron | None stated |
| MYTEC 4.5-Inch 2-in-1 | 9.6/10 | 4.5 in | 4.2 in | 2.0 in | Clamp-on (2.1 in range) or bolt-down | Cast steel | None stated |
| SEDY 4.5-Inch Bench Vise | 9.5/10 | 4.5 in | 3-3/4 in | 2-11/32 in | Bolt-down | Gray iron | None stated |
| Nuovoware 3-Inch Table Vise | 9.4/10 | 2.75 in | 3 in | 2.5 in capacity | Clamp-on | Cast iron | None stated |
| STEINBRÜCKE 3.2-Inch Table Vise | 9.3/10 | 3.2 in (4.5 in in spec table) | 2.79 in (4.3 in in spec table) | 2 in (spec table) | Clamp-on (4 in range) | Cast steel | None stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 9 October 2026.
Buying guide: choosing the best welding vise for table fabrication
Mounting style: clamp-on vs bolt-down
Mounting determines how much clamping torque a vise handles before shifting on the bench. Clamp-on models secure over the table edge using a threaded base screw, allowing rapid repositioning without drilling mounting holes. Bolt-down models mount permanently through pre-drilled holes or table slots using heavy bolts. When setting up a vise on your bench, consider how thick should a welding table top be so the table surface provides a rigid base without bowing under heavy clamping pressure. For dedicated workstations, explore our overview of welding tables and carts.
Jaw width, opening, and throat depth
Jaw width and maximum opening determine the dimensions of stock you can fit between the gripping faces. Widths here range from 2.75 inches up to 6 inches, with openings from 2.79 inches up to 5.9 inches. Throat depth dictates how deeply vertical pieces can drop before hitting the main screw, ranging from 2.0 inches to 3.5 inches among these listings.
Clamping force and materials
Clamping force holds parts steady against weld shrinkage, cutting vibration, and grinding pressure. The listings here specify forces from 1500 pounds up to 4496 pounds (20 kN). Ductile iron rated at 60,000 PSI offers superior toughness against cracking under impact, while cast steel and gray iron suit general shop tasks and light assembly.
Swivel base rotation
A rotating base lets you angle workpieces for comfortable torch access without uncoupling the jaws. Models in this guide feature 240, 270, or full 360-degree rotation. Dual lockdown nuts or levers ensure the vise remains stationary once set.
Pipe jaws and accessories
Dedicated serrated pipe jaws beneath the main flat jaws hold round pipe and conduit without slippage. Soft jaw pads protect delicate alloys and finished threads from teeth marks, while a flat anvil section provides a sturdy surface for minor straightening.
Use as directed. Keep the bench area clear of flammable materials before welding or grinding. Ensure mounting bolts or clamp screws are fully tightened before applying clamping force, protect the screw threads from spatter, and never exceed stated manufacturer ratings.
Before You Strike an Arc
- Check your bench edge thickness against the vise base opening before securing clamp-on models.
- Wipe shipping grease from the jaw faces and spindle, then verify the screw turns smoothly throughout its travel.
- Confirm all included mounting hardware and jaw pads match the listing contents upon arrival.
- Tighten swivel base lockdown levers completely to prevent accidental workpiece rotation during welding fit-up.
FAQ for welders
Can I weld workpieces clamped in a table vise?
Yes, steel and iron bench vises hold metal assemblies securely during tacking and final passes. Attach your ground clamp directly to bare metal on the workpiece or the vise body to prevent electrical arcing across the precision spindle threads. Use protective jaw covers when clamping softer metals.
What is the difference between clamp-on and bolt-down vises?
Clamp-on vises attach directly over a bench edge with a screw mechanism, making them easy to move or store. Bolt-down vises fasten permanently through tabletop holes with heavy bolts and nuts. Bolt-down models handle significantly higher clamping forces without slipping.
Why is throat depth important on a welding vise?
Throat depth measures the clearance from the top of the jaws down to the spindle body. A deeper throat allows wider plates and taller tubing to sit lower in the jaws, providing a more stable grip for grinding, cutting, and welding.
How does swivel base rotation help with fabrication?
A swivel base lets you rotate workpieces to optimal welding angles without opening the jaws and disrupting joint alignment. Models here provide 240, 270, or 360 degrees of rotation with lockdown handles to secure the angle.
Can a table vise clamp round pipe and conduit?
Vises equipped with serrated pipe jaws grip round stock securely without spinning during cutting or welding fit-up. Standard flat jaws work best on flat plate, square tubing, and angle iron.
Related: best welding table for a home shop, types of welding clamps, best welding clamps for fabrication, best heavy duty welding clamps, and the welding tables and carts hub. Also see our best drill press vise. Also see our fixture table vs steel plate welding table. Also see our best welding table top material. Also see our how to keep a welding table from warping. Also see our best welding table height for standing work.
More related guides (10)
Scoring, line by line
Each vise is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick method guide. Mechanical bench vises have no electrical safety listing to state, so every vise here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR 6-Inch Bench Vise | 9.8 | 33 | 24 | 22 | n/a | 0 |
| MYTEC 4.5-Inch 2-in-1 | 9.6 | 28 | 20 | 21 | n/a | 0 |
| SEDY 4.5-Inch Bench Vise | 9.5 | 26 | 19 | 20 | n/a | 0 |
| Nuovoware 3-Inch Table Vise | 9.4 | 22 | 18 | 20 | n/a | 0 |
| STEINBRÜCKE 3.2-Inch Table Vise | 9.3 | 20 | 18 | 18 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.





