Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Sheet Metal Crimpers Under $40 (2026)

Four sheet metal crimpers under $40 compared by stated gauge range, throat depth, build and warranty, ranked by Gear Score.

Best Sheet Metal Crimpers Under $40 (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Midwest MWT-C5Best OverallMidwest MWT-C59.7/10View on Amazon
  2. 2Mutt Tools 5-BladeBest 5-Blade PickMutt Tools 5-Blade9.6/10View on Amazon
  3. 3HURRICANE 5-BladeWidest Gauge RangeHURRICANE 5-Blade9.6/10View on Amazon
  4. 4Gulfmew 5-BladeBest CompactGulfmew 5-Blade9.5/10View on Amazon

Ductwork does not forgive a bad crimp. The joint either slides together and stays put, or it fights you on the ladder and leaks air for years. The best sheet metal crimpers under 40 in this roundup are hand tools with multi-blade heads for HVAC duct, downspout and stove pipe work, scored on stated gauge range, throat depth, build and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Midwest MWT-C5: 1-5/8 in throat depth, compound leverage, made in USA, limited lifetime warranty. Check price on Amazon
  • Best 5-Blade Pick Mutt Tools 5-Blade: 5-blade head, 24 gauge range, safety lock, limited lifetime warranty. Check price on Amazon
  • Widest Gauge Range HURRICANE 5-Blade: 22-28 gauge range with 1/4 in depth markings and finger guards. Check price on Amazon
  • Best Compact Gulfmew 5-Blade: 10.5 in length, 24-28 gauge, safety lock and lanyard hole. Check price on Amazon

The machines

MIDWEST Blade Crimper, 1-5/8″ Throat Depth

MIDWEST Blade Crimper, 1-5/8″ Throat Depth

Midwest Snips9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A made-in-USA blade crimper with a 1-5/8 in throat depth, compound leverage and a limited lifetime warranty.

Pros

  • 1-5/8 in (41.3mm) throat depth for tight fitting joints.
  • Compound leverage handle with textured Kush'N-Power grips.
  • High tensile strength steel stated not to bend under hand pressure.
  • Made in USA with a limited lifetime warranty.

Cons

  • No gauge range is stated.
  • No safety lock is listed.
  • No overall tool length is stated.
  • Warranty covers blades or spring only against manufacturing defects.
Mutt Tools Pipe Crimper Tool 5 Blade Duct Crimper

Mutt Tools Pipe Crimper Tool 5 Blade Duct Crimper

AMERICAN MUTT TOOLS9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-blade duct crimper for 24 gauge sheet metal with a 10 in alloy steel body and a limited lifetime warranty.

Pros

  • Five precision blades for uniform crimps on sheet metal.
  • Stated for 24 gauge sheet metal, duct, downspout and stove pipe.
  • 10 in length and 3.5 in width with ergonomic alloy steel handles.
  • Safety lock for storage; limited lifetime manufacturer warranty.

Cons

  • No throat depth is stated.
  • No depth markings are listed.
  • 24 gauge only; narrower than the 22-28 and 24-28 ranges here.
  • No round-duct diameter range is stated.
HURRICANE 5 Blade Sheet Metal Crimper. HVAC

HURRICANE 5 Blade Sheet Metal Crimper. HVAC

HURRICANE9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-blade crimper with a 22-28 gauge range, 1-1/4 in throat depth and depth markings in 1/4 in increments.

Pros

  • 22-28 gauge range, the widest stated here.
  • 1-1/4 in throat depth with depth markings in 1/4 in increments.
  • Finger guards and safety lock; hang hole for storage.
  • Heat-treated carbon steel blades with anti-rust coating.

Cons

  • No warranty term is stated.
  • 9-1/2 in length is less than the 10 and 10.5 in picks.
  • No lanyard hole is listed.
  • Depth markings only in 1/4 in increments; no finer scale stated.
5 Blade Sheet Metal Crimper

5 Blade Sheet Metal Crimper

Gulfmew9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10.5 in 5-blade crimper for 24-28 gauge sheet metal with a safety lock and lanyard hole.

Pros

  • 10.5 in length for leverage on duct and gutter work.
  • 24-28 gauge range for sheet metal.
  • Carbon steel head with TPR non-slip grips.
  • Safety lock plus rear lanyard hole for hanging or tethering.

Cons

  • No warranty term is stated.
  • No throat depth is stated.
  • No depth markings are listed.
  • Stated not for wire, cable, terminals, PEX, hydraulic hose or thick plate.

Spec sheet comparison

Crimper Gear Score Blades Gauge range Throat depth Length Warranty
Midwest MWT-C5 9.7/10 Blade crimper Not stated 1-5/8 in Not stated Limited lifetime
Mutt Tools 5-Blade 9.6/10 5 24 gauge Not stated 10 in Limited lifetime
HURRICANE 5-Blade 9.6/10 5 22-28 gauge 1-1/4 in 9-1/2 in Not stated as a term
Gulfmew 5-Blade 9.5/10 5 24-28 gauge Not stated 10.5 in Not stated as a term

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 23 October 2026. Two of the four state a warranty term.

Buying guide: the best sheet metal crimpers under 40

Blade count and crimp style

Three picks run 5-blade heads that form several shallow crimps per squeeze for quicker, more even pipe-end forming. The Midwest is the outlier: a blade crimper the listing says makes factory precision crimps to join duct. Either style works on round duct ends. The 5-blade heads cover more edge per squeeze, which suits long runs of duct, while the blade crimper leans on its 1-5/8 in throat depth and compound leverage for tight joints.

Gauge range

Match the stated range to the metal. The HURRICANE lists 22-28 gauge, the Gulfmew 24-28 gauge, and the Mutt Tools 24 gauge. The Midwest lists no gauge range, so there is nothing to check it against. For the rest of the sheet metal kit, the best sheet metal crimpers roundup and the best hand seamer for sheet metal guide cover the neighboring tools.

Throat depth and handle length

Throat depth sets how far onto the duct end the crimp lands: the Midwest lists 1-5/8 in (41.3mm) and the HURRICANE 1-1/4 in, while the Mutt Tools and Gulfmew state none. Handle length sets leverage: 10.5 in for the Gulfmew, 10 in for the Mutt Tools and 9-1/2 in for the HURRICANE, with the Midwest stating no overall length. A sheet metal nibbler pairs well when the job also needs cutouts.

Warranty terms

Two picks state a limited lifetime warranty: the Mutt Tools as a manufacturer warranty, and the Midwest covering blades or spring against manufacturing defects. The Gulfmew and the HURRICANE state no warranty term. A stated warranty does not make a dull tool sharp, but it says something about how the maker expects the tool to hold up. On a hand tool with moving blades, the warranty line is worth a glance before it goes in the toolbox.

Before You Strike an Arc

  • Check the gauge first: the HURRICANE lists 22-28 gauge, the Gulfmew 24-28 gauge, the Mutt Tools 24 gauge, and the Midwest lists no gauge range to check against.
  • Work the safety lock before the first squeeze: the Mutt Tools, Gulfmew and HURRICANE each list one, and it keeps the jaws closed in the toolbox.
  • These are duct, downspout and stove pipe tools; the Gulfmew listing states not for wire, cable, terminals, PEX, hydraulic hose or thick plate.
  • Hang hole or lanyard hole: the HURRICANE and Gulfmew list one each for the truck or the shop wall.
  • On arrival, open and close each tool and check that the blades meet evenly before it goes to the jobsite.

FAQ for welders

What gauge sheet metal can these crimpers handle?

The HURRICANE lists 22-28 gauge, the Gulfmew 24-28 gauge, and the Mutt Tools 24 gauge. The Midwest listing states no gauge range.

What is throat depth on a crimper?

Throat depth is how far the jaws reach onto the duct end to place the crimp. The Midwest lists 1-5/8 in (41.3mm) and the HURRICANE lists 1-1/4 in; the Mutt Tools and Gulfmew state no throat depth.

Which picks have a warranty?

The Mutt Tools states a limited lifetime manufacturer warranty, and the Midwest states a limited lifetime warranty covering blades or spring against manufacturing defects. The Gulfmew and the HURRICANE state no warranty term.

Can these be used on wire or cable?

The Gulfmew listing states not for wire, cable, terminals, PEX, hydraulic hose or thick plate. The other three list duct, downspout and stove pipe work as their uses.

Do any of these have a safety lock?

The Mutt Tools, Gulfmew and HURRICANE each list an integrated safety lock that keeps the jaws closed for storage. The Midwest does not list one.

Related: best sheet metal crimpers for the full roundup, best sheet metal shears, and the metal fab tools hub.

Scoring, line by line

The Gear Score weighs performance (stated gauge range, throat depth and blade design), build (stated materials and handle construction), value for the stated specs, safety and warranty. For a hand crimper, safety means a stated safety lock, finger guards or anti-slip grips; three of the four state a lock. Two listings state a warranty term: the Mutt Tools and the Midwest, both limited lifetime. How We Pick explains the weights.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Midwest MWT-C5 9.7 30 22 20 5 3
Mutt Tools 5-Blade 9.6 29 20 20 6 3
HURRICANE 5-Blade 9.6 30 20 21 7 0
Gulfmew 5-Blade 9.5 28 19 20 6 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

More buying guides