Metal Cutting Saw Types: Which One to Buy
Metal cutting saw types differ by the cut they make, and this guide matches jig saw, hack saw and circular saw to the metal, the shape and the job.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Evolution S185CCSL | 7.25” Metal Cutting Circular9.6/10View on Amazon - 2
DEWALT 20V MAX XR Jig Saw, 3,200 Blade Speed9.5/10View on Amazon - 3
ValueMax Mini Hack Saw with Extra 1 Piece Bi-Metal9.4/10View on Amazon
A length of angle iron waits on the bench, a curve needs cutting in sheet metal, and a short bolt needs trimming flush. Metal cutting saw types answer each of those jobs in a different way, and the wrong saw turns a quick cut into a struggle. This guide matches the jig saw, the hack saw and the circular saw to the metal, the shape and the job, so the saw in hand fits the cut in front of it.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Evolution S185CCSL | 7.25” Metal Cutting Circular
A 15 amp metal cutting circular saw with a 40-tooth TCT blade, 0-45 degree bevel and a cutting depth up to 2-1/2 inches.
Pros
- 15 amp motor for heavy-duty cutting in mild steel
- 40-tooth TCT blade for smooth, spark-free cuts
- 0-45 degree bevel and up to 2-1/2 inch cutting depth
- 3 year warranty for the saw
Cons
- 11.4 lb weight makes overhead work harder than a lighter saw
- Corded power needs an outlet near the work
- Only a TCT blade in the box, so other blades need a separate purchase
- Cutting depth up to 2-1/2 inches limits thicker stock

DEWALT 20V MAX XR Jig Saw, 3,200 Blade Speed
A cordless 20V brushless jig saw with a 3,200 blade speed, 4-position orbital action and a bevel shoe for curved and straight cuts in metal.
Pros
- Brushless motor for efficient performance and longer runtime
- 3,200 blade speed with variable speed trigger and dial
- 4-position orbital action for control of cut quality and speed
- All-metal keyless shoe bevels to 45 degrees with detents at 0, 15 and 30 degrees
Cons
- Bare tool only, so a battery and charger need a separate purchase
- No warranty term is stated
- Jig saw blades are t-shank only, so other blade types do not fit
- Orbital action and bevel settings add setup steps when the material or angle changes

ValueMax Mini Hack Saw with Extra 1 Piece Bi-Metal
A compact aluminum mini hack saw with 2 bi-metal 10 inch blades for tight spaces and small cuts in metal, wood and PVC.
Pros
- Aluminum alloy frame at about 245g for easy handling in tight spaces
- 2 bi-metal 10 inch blades, with a spare in the box
- 24T fine teeth for cutting hard materials like metal
- Blade length adjusts, and a screwdriver swaps the blade
Cons
- No warranty term is stated
- Hand powered, so long cuts take more effort than a powered saw
- Short blade gives a short stroke, so long cuts take more passes
- Compact 11 inch size suits small objects, not larger stock
Metal Cutting Saw Types in Short
The types split by the cut: a jig saw follows curves and cutouts, a hack saw handles small cuts in tight spaces, and a circular saw makes straight cuts in mild steel. Pick by the shape of the cut and the size of the stock, then match the blade to the metal. The metal cutting saw types collection groups the metal fab tools used across these cuts.
Saw Types at a Glance
| Best for | Power | Blade | Gear Score | |
|---|---|---|---|---|
| Evolution S185CCSL Circular Saw | Straight cuts in mild steel | 15 amp corded | 7-1/4 in TCT, 40-tooth | 9.6/10 |
| DEWALT DCS334B Jig Saw | Curved cuts in metal | 20V cordless | T-shank | 9.5/10 |
| ValueMax Mini Hack Saw | Small cuts in tight spaces | Hand powered | 10 in bi-metal, 24T | 9.4/10 |
The table above lines up the 3 saws in this guide: a cordless jig saw, a mini hack saw and a metal cutting circular saw. Each saw handles a different cut, and the gear section below says what each saw does on the bench.
Jig Saws: Curves and Cutouts
A jig saw cuts curves, cutouts and straight lines in sheet and plate, with a narrow blade that turns in the cut. The DEWALT DCS334B (on Amazon) runs at a 3,200 blade speed with a brushless motor, and a variable speed trigger and dial give precise speed control. A 4-position orbital action controls cut quality and speed, so the saw can move fast on rough cuts and slow for a clean edge.
The shoe bevels with detents at 0, 15 and 30 degrees and a positive stop at 45 degrees, which suits angled cuts in metal. A bright LED lights dim work surfaces, and an integrated dust blower clears the line of sight while cutting. The saw takes t-shank blades, and an all-metal, lever-action keyless blade change swaps them fast.
Hack Saws: Small Cuts in Tight Spaces
A hack saw is the hand tool for small cuts where a powered saw cannot reach. The ValueMax mini hack saw (on Amazon) has an aluminum alloy frame and weighs about 245g, with a size of 11 x 2.3 x 0.8 inches for confined spaces. Its handle is ABS and TPR, elastic and soft to the touch, with an anti-slip grip for comfort during long use.
The saw comes with 2 bi-metal 10 inch blades, a blade pre-installed and a spare, with 24T fine teeth for hard materials like metal. A screwdriver loosens the upper screw to swap the blade, and the design allows blade length adjustment. It cuts wood, PVC, iron, copper, stainless steel and foam, which suits small objects and craft projects. See the types of hacksaw blades guide for teeth, materials and uses.
Circular Saws: Straight Cuts in Steel
A metal cutting circular saw makes straight, clean cuts in mild steel plate and section, with a toothed blade that spins through the metal. The Evolution S185CCSL (on Amazon) runs on a 15 amp motor and carries a 40-tooth TCT blade of 7-1/4 inches for smooth, spark-free cuts in mild steel. Bevel adjusts from 0 to 45 degrees with paddle levers, and cutting depth reaches up to 2-1/2 inches.
A blade viewing window and channeled airflow keep the cutline clean and visible on each pass. The saw weighs 11.4 lb, and the warranty is 3 years. Cut metal with the guards in place, clamp the work, wear eye and face protection, and keep gloves away from rotating parts. OSHA machine guarding rules cover guards on saws like these. See the best saw blade for cutting metal roofing guide for blades that suit roofing work.
The Gear That Matches Each Type
The gear below covers each type: a jig saw for curves, a hack saw for tight spaces, and a circular saw for straight cuts in mild steel.
FAQ for welders
Which metal cutting saw type cuts curves?
A jig saw cuts curves and cutouts, with a narrow blade that turns in the cut. The DEWALT DCS334B in this guide runs at a 3,200 blade speed with 4-position orbital action for control of cut quality and speed. Set the orbital action low for a clean edge on curves.
What saw cuts metal in a tight space?
A mini hack saw fits where a powered saw cannot reach. The ValueMax saw weighs about 245g and measures 11 x 2.3 x 0.8 inches, with 2 bi-metal 10 inch blades for metal, wood and PVC. It suits small objects and short cuts in confined spaces.
Which saw makes straight cuts in mild steel?
A metal cutting circular saw makes straight cuts in mild steel plate and section. The Evolution S185CCSL runs on a 15 amp motor with a 40-tooth TCT blade, a 0-45 degree bevel and a cutting depth up to 2-1/2 inches. It suits steel fabrication, metal roofing and framing.
Can a jig saw cut metal?
Yes, with the right blade for the metal. The DEWALT DCS334B takes t-shank blades and runs at a 3,200 blade speed with variable speed control. Match the blade to the metal and let the saw cut at its own pace.
Does each metal need a different blade?
Match the blade to the metal and the cut. The ValueMax blades are bi-metal with 24T fine teeth for hard materials like metal, and the Evolution saw uses a 40-tooth TCT blade for mild steel. Check the blade the maker lists for the metal you cut.
Related: can a saw cut metal, how to set up a band saw for metal cutting, and the metal fab tools hub. Also see types of chop saws.




