Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Angle Grinder Side Handle (2026): 5 Handles Compared

Five angle grinder side handles compared by thread size, material, grip shape and pack contents, and scored from what each listing states.

Best Angle Grinder Side Handle (2026): 5 Handles Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1TorSor U-Shape 2-PackBest OverallTorSor U-Shape 2-Pack9.6/10View on Amazon
  2. 2DEWALT OEM HandleBest OEM FitDEWALT OEM Handle9.5/10View on Amazon
  3. 3LDEXIN 8mm 2-PackBest 2-PackLDEXIN 8mm 2-Pack9.5/10View on Amazon
  4. 4XMHF 12mm 2-PackBest for Big GrindersXMHF 12mm 2-Pack9.4/10View on Amazon

The cutting wheel caught an edge and the grinder kicked, and the only thing between a bad day and a worse one was a firm grip on the side handle. That handle is a simple control upgrade on an angle grinder. A loose or missing handle turns every cut into a wrestling match. The best angle grinder side handle is the one that threads into your grinder, fits your hand, and stays tight. This guide compares five, from a genuine DeWalt part to universal 2-packs, on thread size, material, grip and what comes in the box.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall TorSor U-Shape 2-Pack: U-shape loop grip, universal 8mm fit, screws and wrenches included in the 2-pack. Check price on Amazon
  • Best OEM Fit DEWALT OEM Handle: Genuine replacement part in alloy steel, brand-specific fit for its grinders. Check price on Amazon
  • Best 2-Pack LDEXIN 8mm 2-Pack: Two 8mm handles with a screw and an ergonomic grip. Check price on Amazon
  • Best for Big Grinders XMHF 12mm 2-Pack: 12mm thread and 28mm bottom hole for larger grinders, two handles per pack. Check price on Amazon

The machines

2 Pack Angle Grinder Handle Replacement U Shape

2 Pack Angle Grinder Handle Replacement U Shape

TorSor9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of U-shape loop grip handles for 8mm thread grinders, in ABS with screws and wrenches included.

Pros

  • U-shape loop grip with ergonomic design
  • Universal 8mm fit for grinders, polishers and sanders
  • Screws and installation wrenches included
  • Ambidextrous, anti-slip and wear-resistant grip

Cons

  • ABS plastic, not metal
  • No warranty term stated
  • Needs a 67mm inner diameter hole, measure first
  • No safety listing stated
Replacement Side Handle for Dewalt / Black

Replacement Side Handle for Dewalt / Black

DEWALT9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A genuine DeWalt replacement side handle in metal, 2.5 in long, made for DeWalt and Black and Decker grinders.

Pros

  • Genuine DeWalt replacement part
  • Metal body with alloy steel handle
  • Brand-specific fit for DeWalt and Black and Decker
  • Ambidextrous lever design, easy to install

Cons

  • Single handle, no screws or tools listed
  • Thread size not stated
  • Bulk packed, no retail packaging described
  • No warranty term stated
2Pcs 8mm Thread Angle Grinder Side Handle

2Pcs 8mm Thread Angle Grinder Side Handle

LDEXIN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Two 8mm thread side handles in metal and plastic with an ergonomic grip, with a screw included.

Pros

  • Two handles and a screw in the pack
  • 8mm thread fits the common grinder size here
  • Ergonomic, comfortable non-slip grip
  • Metal and plastic construction

Cons

  • Non-OEM generic product
  • No warranty term stated
  • No safety listing stated
8MM Diameter Thread Auxiliary Side Handle Fit

8MM Diameter Thread Auxiliary Side Handle Fit

MIKMAYTOO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single 8mm thread auxiliary side handle in metal and plastic with a comfortable non-slip grip.

Pros

  • 8mm thread fits the common grinder size here
  • Comfortable non-slip grip, user-friendly design
  • Light at 0.09 kg
  • Metal and plastic construction

Cons

  • Single handle, install screws not included
  • Non-OEM generic product
  • No warranty term stated
  • No safety listing stated
XMHF 12mm Dia Thread Plastic Angle Grinder Sander

XMHF 12mm Dia Thread Plastic Angle Grinder Sander

XMHF9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Two 12mm thread side handles in metal and plastic with a 28mm bottom hole, for larger grinders.

Pros

  • 12mm thread with 28mm bottom hole for larger grinders
  • Two handles per pack
  • Easy to install, stated
  • Light at 0.18 kg

Cons

  • 12mm fits fewer grinders than the 8mm handles here
  • No warranty term stated
  • No safety listing stated

Other welders and gear to compare

Spec sheet comparison

Model Thread Pack Material Grip Extras
TorSor U-Shape 2-Pack 8mm 2 ABS U-shape loop, ergonomic 4 screws, 2 wrenches
DEWALT OEM Handle Not stated 1 Metal, alloy steel Lever None stated
LDEXIN 8mm 2-Pack 8mm 2 Metal, plastic Ergonomic Screw included
MIKMAYTOO 8mm Handle 8mm 1 Metal, plastic Ergonomic, non-slip None stated
XMHF 12mm 2-Pack 12mm 2 Metal, plastic Not stated None stated

All specs here repeat what the maker rates and the listing prints, copied down 22 October 2026.

What the listings tell you

We read five side handle listings. Three use an 8mm thread, one uses 12mm, and one does not state the thread. Three ship as 2-packs and two as singles. One is a genuine OEM part, two state they are non-OEM generics, and two do not say. None states a warranty term, and one listing contradicts itself on color. Weights run from 0.09 kg to 0.2 kg where stated, and two of them list installation hardware in the box: the TorSor with 4 screws and 2 wrenches, and the LDEXIN with a screw.

How to choose the best angle grinder side handle

A side handle has one job: keep the grinder under control. Match the thread first, then the grip, then the box contents. The five handles below cover 8mm and 12mm threads, OEM and generic, bar and loop grips, so there is a fit for most grinders.

Match the thread size

The thread has to match your grinder or the handle is a paperweight. Three listings here use 8mm, the XMHF uses 12mm, and the DeWalt does not state a thread size at all, it is sold as a brand-specific fit. Measure the old handle or check the grinder’s manual before ordering, because a 12mm handle will not thread into an 8mm boss no matter how it looks in the photo.

OEM or generic

The DeWalt is a genuine replacement part made for its own grinders. The MIKMAYTOO and LDEXIN state they are non-OEM generics, and the other two do not say. A generic often ships as a 2-pack; an OEM part removes the fit question entirely, which matters if the grinder is your daily driver.

Straight bar or loop grip

Four handles here are straight bars; the TorSor is a U-shape loop that gives a two-handed grip. Loops suit long grinding sessions, bars suit tight spots. The listings describe ergonomic, non-slip grips on three of the five, so read the grip description with the same care as the thread size. Pick the shape your hands prefer for the work you do most.

What comes in the box

Counts differ: the TorSor 2-pack includes 4 screws and 2 wrenches, the LDEXIN includes a screw, and the MIKMAYTOO notes that install screws are not included. The DeWalt and XMHF listings say nothing about hardware either way. If your grinder lost its original hardware along with the handle, a pack with screws in the box saves a second order and a second wait. The LDEXIN 2-pack measures 4.33 inches on each side and includes a screw in the box, so it is the roomiest pack here with hardware stated.

Measure the thread and the boss

Thread size is the first measurement and the boss diameter is the second. Three listings here use an 8mm thread: the MIKMAYTOO, the LDEXIN 2-pack, and the TorSor loop grip. The XMHF uses a 12mm thread, stated as 12mm/0.47 inch, and lists a 28mm/1.1 inch bottom hole diameter with a total size of 15 x 5cm (5.9 inch x 1.9 inch). The TorSor loop grip states it suits products with an inner diameter of 67mm and lists a 6.7 cm center-to-center spacing with an 11 cm projection. The DEWALT is sold as a brand-specific replacement with no thread stated, so it belongs on a DeWalt or Black and Decker grinder from the compatibility list. When in doubt, measure the old handle: an 8mm thread will not start in a 12mm boss, and forcing it ruins both. Weight matters on a tool you hold all day: the MIKMAYTOO is 0.09 kg, the XMHF 2-pack is 0.18 kg, and the TorSor 2-pack is 0.2 kg, while the DEWALT lists 2.5 inches long by 1 inch wide in alloy steel. Shape and material round out the picture: the TorSor lists 4.33 inches long by 3.54 inches wide in ABS with a loop grip, while the MIKMAYTOO and LDEXIN bar handles combine metal and plastic. The DEWALT is alloy steel throughout, which suits a grinder that lives on a workbench and gets handled hard.

Use as directed. Always run the grinder with its guard on and the side handle tight, keep the work clamped or braced, and let the wheel do the cutting instead of forcing it. Check that the handle threads in fully and seats tight before every session, since a handle that backs out under vibration is worse than none at all. See the OSHA welding overview.

FAQ for welders

Will an 8mm handle fit my grinder?

Only if your grinder takes an 8mm thread. Three listings here use 8mm, one uses 12mm, and the DeWalt is sold as a brand-specific fit with no thread stated. Check the grinder’s manual or measure the old handle before ordering, since the wrong thread will not seat no matter how close it looks.

Can I use a side handle on a sander or polisher?

The TorSor listing suits its handles to angle grinders, polishing machines, sanding machines and grinding machines. For the others, the listings only mention angle grinders.

What is the difference between a straight and a loop handle?

A straight bar screws into one side of the grinder; a U-shape loop like the TorSor gives a two-handed grip across the tool. Loops add control on long passes and help when the wheel bites, while bars stay out of the way in tight spots and against walls.

Why does the LDEXIN listing show two colors?

The bullets say black and the spec table says silver. The listing never resolves the split, so if color matters, confirm with the seller before ordering.

Do side handles wear out?

The grip wears with use, and the threads wear if the handle is cross-threaded. None of these listings states a warranty term, so judge on the stated materials: the DeWalt lists an alloy steel handle, while the generics list metal and plastic. A spare from a 2-pack keeps you working.

Should the handle match the grinder brand?

Not necessarily. The DeWalt handle is made for DeWalt and Black and Decker grinders, but universal listings here, like the TorSor, fit any grinder with the matching 8mm thread. Brand matching matters most when the listing states no thread size, as with the DeWalt.

Related: the best angle grinder for beginners, the angle grinder vs bench grinder comparison, the best angle grinder for cutting metal and our metal fab tools hub.

Scoring, line by line

Each handle is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None of these listings states a safety listing or a warranty term, so all score zero on those two criteria; the ranking comes from fit, build and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
TorSor U-Shape 2-Pack 9.6 29 19 21 n/a 0
DEWALT OEM Handle 9.5 28 21 18 n/a 0
LDEXIN 8mm 2-Pack 9.5 26 18 21 n/a 0
MIKMAYTOO 8mm Handle 9.5 26 18 20 n/a 0
XMHF 12mm 2-Pack 9.4 24 18 20 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides