Angle Grinder vs Bench Grinder: Which One Should You Buy?
Three grinders compared by power, speed, wheels and warranty, to pick between angle and bench grinders for the shop, scored from listings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Makita GA4530 4-1/2" Angle Grinder Corded Power9.6/10View on Amazon - 2
WEN BG4260 2.1-Amp 6-Inch Single Speed Bench9.5/10View on Amazon - 3
Cordless Angle Grinder 4-1/2" Compatible9.5/10View on Amazon
The verdict first: pick an angle grinder like the Makita GA4530 when the work comes to you, cutting and grinding metal away from the bench; pick a bench grinder like the WEN BG4260 when the work comes to the bench, sharpening tools and bits in one spot. This angle grinder vs bench grinder comparison uses three examples from the listings, ranked by score.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The three grinders

Makita GA4530 4-1/2" Angle Grinder Corded Power
A corded 4.5 in angle grinder with a 6.0 AMP motor at 11,000 RPM.
Pros
- 11,000 RPM, the fastest here
- 6.0 AMP corded motor
- Includes wheel, guard, flange and wrench
- 1 year warranty stated
Cons
- No safety certification stated
- Corded, needs an outlet
- 4 lb corded weight

WEN BG4260 2.1-Amp 6-Inch Single Speed Bench
A 6 in bench grinder with a 2.1-amp motor at 3450 RPM and a two-year warranty.
Pros
- Two-year warranty stated
- Includes 60-grit and 36-grit wheels
- Pivoting tool rests and eye guards
- 14 lb, stable on the bench
Cons
- No safety certification stated
- 3450 RPM, slower than the angle grinders
- Single speed
- Needs bench space

Cordless Angle Grinder 4-1/2" Compatible
A cordless 4.5 in brushless grinder with 6 speeds, tool only, no battery.
Pros
- 6 variable speeds, 3000 to 8500 RPM
- Brushless motor
- Includes 11 cutting and grinding wheels
- Compatible with DEWALT 20V MAX batteries
Cons
- No warranty term is stated
- Battery and charger not included
- No safety certification stated
- 8500 RPM max, slower than the Makita
Other welders and gear to compare
Ryobi 5133001903 R18AG-0 One+ Cordless Angle Grinder AngledCheck price on Amazon
WEN BG625V 2.5-Amp 6-Inch Variable Speed Bench Grinder withCheck price on Amazon
Makita 9557PBX1 4-1/2" Paddle Switch Cut-Off/Angle GrinderCheck price on Amazon
DEWALT Angle GrinderCheck price on Amazon
Bosch GWS8-45 4-1/2 In. Angle GrinderCheck price on Amazon
SKIL 6 Amp 4-1/2-Inch Corded Angle GrinderCheck price on Amazon
Side by side: angle grinder vs bench grinder
| Grinder | Type | Power | Speed | Warranty |
|---|---|---|---|---|
| Makita GA4530 angle grinder | Angle grinder | 6.0 AMP corded | 11000 RPM | 1 year |
| WEN BG4260 bench grinder | Bench grinder | 2.1-amp corded | 3450 RPM | Two-year |
| VERVEWAVE cordless grinder | Angle grinder | DEWALT 20V MAX | 3000-8500 RPM | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (20 October 2026).
Power and speed
The Makita example runs a 6.0 AMP corded motor at 11,000 RPM, the fastest here. The VERVEWAVE example is a cordless brushless motor with 6 variable speeds from 3000 to 8500 RPM. The WEN example runs a 2.1-amp motor at 3450 RPM. Speed is not everything: the bench example trades RPM for a fixed, two-handed workstation.
Corded or cordless
The Makita and WEN examples are corded AC. The VERVEWAVE example is cordless and compatible with DEWALT 20V MAX batteries, but the listing states the battery and charger are not included, so it is a tool-only purchase. If you already own DEWALT 20V batteries, the VERVEWAVE fits your shelf; otherwise the corded examples are ready out of the box.
Wheels and what is in the box
The Makita example includes a 4.5 in grinding wheel, wheel guard, inner flange and lock nut wrench. The VERVEWAVE example includes 11 cutting and grinding wheels, the largest consumable count here, plus a side handle that stores the wrench. The Makita example’s wheel guard, inner flange and lock nut wrench cover the mounting hardware a bare wheel needs. The WEN example includes one 60-grit and one 36-grit 6 in wheel with 1/2 in arbors.
Warranty
The Makita listing states a 1 year warranty. The WEN listing states it is backed by a two-year warranty. The VERVEWAVE listing states no warranty term.
Switches, guards and dust control
The safety hardware differs more than the motors do. The Makita example uses a slide switch with lock-on for continuous work, and its listing stresses dust sealing: labyrinth construction seals the motor and bearings, and a zig-zag varnish seals the armature, both stated to extend tool life in dirty grinding work. A wheel guard ships in the box. The VERVEWAVE example takes a different approach to the switch: a lock switch the listing calls safer than a one-touch button, because the tool cannot restart unexpectedly when a spent battery is swapped. It adds soft start and power failure protection, and states the wheel stops in 1.5 seconds after you release the switch. Its three-dimensional vent design is stated to keep the motor cool and keep dust off the internal parts, and wheel changes use a spindle lock button with the supplied wrench.
On the bench side, the WEN example lists adjustable eye guards and pivoting tool rests, the two fittings that make freehand sharpening repeatable. None of the three listings states a safety certification, which is why safety scores zero across the board, but the stated guards and switches are worth comparing when you choose.
Ergonomics: weight and grip
An angle grinder lives in your hands, so the stated weights matter. The Makita example lists 4 lbs with a compact 2-1/4 in diameter barrel, stated for added comfort on long jobs. The VERVEWAVE example lists an ergonomic comfort grip plus a 3-position non-slip auxiliary handle that suits right and left-handed users. The WEN example states 14 lb. If your work is mostly overhead or one-handed, the lighter handheld examples have the edge; if the tool stays on the bench, ergonomics matter less than the rests and guards.
Speed control for the job
Only the VERVEWAVE example offers variable speed: 6 speeds from 3000 to 8500 RPM, with the listing assigning 5-6 to fast cutting and rough grinding, 3-4 to general sanding and finishing, and 1-2 to fine sanding and special materials. That range is genuinely useful when one tool has to cut, grind and polish. The Makita example runs a single 11,000 RPM, the fastest here, which suits aggressive metal removal. The bench example is single-speed by design: 3450 RPM on the WEN, a steady speed for sharpening where consistency beats raw RPM.
FAQ for welders
Which is better for cutting metal?
An angle grinder: the Makita example spins at 11,000 RPM and the VERVEWAVE at up to 8500 RPM, both handheld for cutting and grinding.
Which is better for sharpening tools?
A bench grinder: the WEN example has tool rests and two grinding wheels for reviving knives, bits and tools.
Does the VERVEWAVE include a battery?
No: the listing states it is tool only and does not include the battery or charger.
Which DEWALT batteries fit the VERVEWAVE?
The listing states compatibility with DEWALT 20V lithium-ion batteries, naming the DCB200 through DCB240 series. The tool is sold without a battery or charger, so you need one of those packs already.
Which example handles rust removal?
The VERVEWAVE: its listing names rust removal among the uses for the brushless motor, and the 6 speeds from 3000 to 8500 RPM let you drop to a gentler speed for surface rust instead of gouging the metal. The Makita example at 11,000 RPM also suits rust, but with no speed control you work at full speed only.
Scoring, line by line
The Shop Score weighs performance, build, value, safety and warranty. For grinders, safety means stated guards, switches and certifications; none of the three listings states a safety certification, so all safety scores are 0. Two listings state a warranty. How we pick explains the weights.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Makita GA4530 angle grinder | 9.6 | 32 | 22 | 21 | 0 | 3 |
| WEN BG4260 bench grinder | 9.5 | 30 | 21 | 21 | 0 | 0 |
| VERVEWAVE cordless grinder | 9.5 | 30 | 21 | 21 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.
More welding guides
See every metal fab tool guide.
More picks: metal fab tools.




