Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Dead Blow Hammer Sizes: Head Weight and Handle Guide

Dead blow hammer sizes from 0.5 to 3 pounds: single hammers and sets compared by head weight, length, grip and the work each maker lists.

Dead Blow Hammer Sizes: Head Weight and Handle Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1NEIKO 02871A Dead Blow Hammer With Brass CapNEIKO 02871A Dead Blow Hammer With Brass Cap9.6/10View on Amazon
  2. 22 LB Dead Blow Hammer, One-Piece Molded2 LB Dead Blow Hammer, One-Piece Molded9.6/10View on Amazon
  3. 3C&T 4-piece Dead Blow Hammer setC&T 4-piece Dead Blow Hammer set9.6/10View on Amazon
  4. 4YIYITOOLS Dead Blow Hammer SetYIYITOOLS Dead Blow Hammer Set9.6/10View on Amazon

A dead blow hammer that is too light hits with less force, and one that is too heavy wears out your arm, so dead blow hammer sizes come down to head weight and what the job asks of it. This guide lays out the sizes in the hammers below, single hammers and sets alike, and matches each size to the work its maker lists. Pick the weight by the job, and let the grip and the face do the rest.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

NEIKO 02871A Dead Blow Hammer With Brass Cap

NEIKO 02871A Dead Blow Hammer With Brass Cap

NEIKO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1.5-pound dead blow hammer with a brass cap and a rubber face for auto body work, woodworking and sheet metal forming.

Pros

  • Steel shot filled head adds force and eliminates rebound
  • Brass cap and rubber faces for non-marring strikes
  • Diamond textured non-slip handle grip
  • Unibody molded body resists wear between head and handle

Cons

  • No warranty term is stated
  • Single hammer, so other weights need another order
  • Handle measures 11-35/64 inches
  • One-piece molded body cannot be taken apart for repair
2 LB Dead Blow Hammer, One-Piece Molded

2 LB Dead Blow Hammer, One-Piece Molded

HORUSDY9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pound one-piece dead blow hammer with a 13.78-inch length for auto repair, carpentry, tile work and metalworking.

Pros

  • Steel shot inside the head absorbs shock and cuts bounce
  • One-piece molded body with no weak point between head and handle
  • Textured handle holds in oily or sweaty conditions
  • 13.78-inch length with a 4.13-inch head

Cons

  • No warranty term is stated
  • Single hammer at 2 pounds, so other weights need another order
  • 2-pound head weighs more than the 1.5-pound NEIKO
  • No brass cap face
C&T 4-piece Dead Blow Hammer set

C&T 4-piece Dead Blow Hammer set

C&T9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece set of 0.5, 1, 2 and 3-pound hammers for mechanical assembly, automotive repair and metal forming.

Pros

  • Four hammers in one set: 0.5, 1, 2 and 3 pounds
  • Steel ball filled heads counteract recoil and sparks
  • Diamond-patterned non-slip handle
  • One-piece PVC body resists wear between head and handle

Cons

  • 7.6-pound total weight for the set
  • PVC body with no stated rubber face
  • Four hammers need storage space
  • No stated handle length per hammer
YIYITOOLS Dead Blow Hammer Set

YIYITOOLS Dead Blow Hammer Set

YIYITOOLS9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-piece set of 1, 1.5 and 3-pound hammers for exterior wall tile, interior floor and furniture decoration.

Pros

  • Three hammers in one set: 1, 1.5 and 3 pounds
  • Steel balls in the heads for no-rebound strikes
  • Double percussion surface with a flat face
  • Unibody molded with a checkered grip

Cons

  • 6.0-pound total weight for the set
  • Stated uses cover tile, floor and furniture, not auto work
  • Three hammers need storage space
  • No stated handle length per hammer

What dead blow hammer sizes mean

A dead blow hammer is sized by its head weight, and the head carries steel shot or steel balls that move on impact. The shot absorbs the shock, adds force to the blow and cuts rebound, so the face stays on the work. The NEIKO lists brass cap and rubber faces for non-marring strikes, and the bodies are molded in one piece, so there is no joint between head and handle to work loose. Size is the head weight.

Dead blow hammer sizes side by side

Dead Blow Hammer Gear Score Sizes Length Grip
NEIKO 1.5 lb Dead Blow Hammer 9.6/10 1.5 lb 12.75 in Diamond textured non-slip
HORUSDY 2 lb Dead Blow Hammer 9.6/10 2 lb 13.78 in Textured non-slip
C&T 4-Piece Dead Blow Set 9.6/10 0.5, 1, 2 and 3 lb 16.5 in (set) Diamond-patterned non-slip
YIYITOOLS 3-Piece Dead Blow Set 9.6/10 1, 1.5 and 3 lb 14.5 in (set) Checkered grip

Set dimensions cover the whole box, not one hammer. The NEIKO and HORUSDY figures are for single hammers.

Which size for which job

  • Auto body and sheet metal. The NEIKO 1.5-pound hammer lists auto body work, woodworking and sheet metal forming, and the HORUSDY 2-pound hammer (on Amazon) lists auto body repair and metalworking.
  • Tile and furniture. The YIYITOOLS set lists exterior wall tile, interior floor and furniture decoration.
  • Assembly and equipment. The C&T set lists mechanical assembly, automotive repair and metal forming, and the HORUSDY lists equipment assembly.
  • One weight or a set. The sets put several weights in one box, so the weight can change with the job.

See the best auto body hammer and dolly set guide and the best ball peen hammer for metalwork guide, and all metal fab tools.

The gear

Head weight is the measurement to match, so the hammers below are listed by the weights they state.

FAQ for welders

What dead blow hammer size should I buy first?

It depends on the job. The hammers here run from 0.5 pounds in the C&T set to 3 pounds in the YIYITOOLS and C&T sets. Match the weight to the work the maker lists: auto body and sheet metal for the 1.5-pound NEIKO, tile and furniture for the YIYITOOLS set.

What is inside a dead blow hammer head?

Steel shot or steel balls. All four state steel shot or steel balls inside the head, which absorb impact shock and cut rebound.

Do dead blow hammers spark?

Only the C&T set’s listing mentions sparks: its steel ball filled heads counteract recoil and sparks. The NEIKO, HORUSDY and YIYITOOLS listings do not state spark resistance.

Can one hammer cover every job?

A set covers more ground than a single hammer. The C&T set includes 0.5, 1, 2 and 3-pound hammers, and the YIYITOOLS set includes 1, 1.5 and 3-pound hammers.

What grip should a dead blow hammer have?

The NEIKO lists a diamond textured non-slip grip, the HORUSDY a textured handle, the YIYITOOLS a checkered grip and the C&T a diamond-patterned non-slip handle.

Related: metal fab tools, best dead blow hammer with metal ends, and best ball peen hammer for metalwork.

More buying guides