Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Tube Bender Under 100: 4 Picks Scored for the Shop (2026)

Four tube benders under 100 dollars, compared on outer diameter capacity, bend angle, die count, metal build and kit accessories.

Best Tube Bender Under 100: 4 Picks Scored for the Shop (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR 1/4-7/8 Ratcheting Tube BenderTop PickVEVOR 1/4-7/8 Ratcheting Tube Bender9.6/10View on Amazon
  2. 2CARVALAX 1/4-7/8 Color Head BenderBest Color-Coded KitCARVALAX 1/4-7/8 Color Head Bender9.6/10View on Amazon
  3. 3Super Stars 78489 3-in-1 Tubing BenderBest 180-Degree BenderSuper Stars 78489 3-in-1 Tubing Bender9.6/10View on Amazon
  4. 4Beaiguna PB-001 15-Piece Tube BenderMost Complete KitBeaiguna PB-001 15-Piece Tube Bender9.5/10View on Amazon

When you are shaping fuel lines on the fab bench, routing refrigeration loops, or bending hard lines for a project, kinked tubing and flattened bends ruin the fit-up immediately. To find the best tube bender under 100, we compared four manual workshop tools across outer diameter capacity, bend angle, die counts, metal build quality, and kit gear from what each manufacturer listing states. Every tool in this lineup is hand powered and requires no shop air or electrical hookup, making clean 90-degree and 180-degree bends accessible for hobbyists and small fab shops.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Top Pick VEVOR 1/4-7/8 Ratcheting Tube Bender: 7 dies covering 1/4 to 7/8 inch tubing, forward and reverse ratcheting, cutter and reamer included, and a 10.7 lb metal build. Check price on Amazon
  • Best Color-Coded Kit CARVALAX 1/4-7/8 Color Head Bender: 7 color-coded aluminum heads from 1/4 to 7/8 inch, reverse adapters, deburring tool, and a 20-second setup claim. Check price on Amazon
  • Best 180-Degree Bender Super Stars 78489 3-in-1 Tubing Bender: Bends 1/4, 5/16 and 3/8 inch tube up to 180 degrees at only 1.3 lb, with a two-stage trigger release handle. Check price on Amazon
  • Most Complete Kit Beaiguna PB-001 15-Piece Tube Bender: 15-piece ratcheting set with 7 color-coded heads for 1/4 to 7/8 inch tubing, reverse adapters, cutter and case. Check price on Amazon

The machines

VEVOR Pipe Tube Bender, 1/4"-7/8" O.D. Ratcheting

VEVOR Pipe Tube Bender, 1/4"-7/8" O.D. Ratcheting

VEVOR9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10.7 lb ratcheting tube bender with 7 dies from 1/4 to 7/8 inch, forward and reverse 90-degree bending, and an inner/outer reamer.

Pros

  • 7 interchangeable bending dies covering 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, and 7/8 inch tubing
  • Bends soft copper and aluminum tubing up to 90 degrees in both forward and reverse configurations
  • Includes a bearing-type pipe cutter, deburring tool, inner/outer reamer, and carrying case
  • Extra-long handle provides leverage for one-handed ratcheting in confined spaces

Cons

  • No warranty term is stated in the listing
  • Bending is limited to soft copper and aluminum pipes
  • No safety certifications such as UL, CSA, or ETL are stated
  • 10.7 lb weight makes it heavier to transport than simple lever benders
CARVALAX Pipe Tube Bender Set, Reverse Adapters

CARVALAX Pipe Tube Bender Set, Reverse Adapters

CARVALAX9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 11.97 lb ratcheting tube bender kit featuring 7 color-coded aluminum heads from 1/4 to 7/8 inch and a 20-second setup claim.

Pros

  • 7 color-coded aluminum heads from 1/4 to 7/8 inch simplify size selection on the bench
  • Handles soft copper, aluminum, light-wall stainless, and PVC tubing up to 90 degrees
  • Comes with 2 crossbar assemblies, 2 reverse bender adapters, a tube cutter, and deburring tool
  • Extra-long handle and ratcheting mechanism support single-handed operation in tight spaces

Cons

  • No warranty term is stated in the listing
  • Notes that pre-heating is necessary if the bending outcome is unsatisfactory
  • 11.97 lb package weight is the heaviest among the four picks
Super Stars 3-in-1 Tubing Bender for 1/4", 5/16"

Super Stars 3-in-1 Tubing Bender for 1/4", 5/16"

Super Stars9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact 1.3 lb manual lever bender with a degree indicator wheel and patented two-stage trigger release for 180-degree bends.

Pros

  • Bends 1/4, 5/16, and 3/8 inch tubing up to 180 degrees without crossing handles
  • Patented quick-action trigger release repositions the handle midway through a bend
  • Degree indicator wheel with white markings on a green face provides clear angle tracking
  • Weighs only 1.3 lb for effortless portability and tight under-hood access

Cons

  • No warranty term is stated in the listing
  • Limited to 1/4, 5/16, and 3/8 inch tubing, with no capacity for larger 1/2 to 7/8 inch lines
  • Does not include pipe cutters, deburring tools, or a storage box
Beaiguna 15PCS Copper Pipe Bender Tool

Beaiguna 15PCS Copper Pipe Bender Tool

Beaiguna9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 11.16 lb 15-piece ratcheting tube bender set with 7 color-coded aluminum heads for 1/4 to 7/8 inch lines and reverse adapters.

Pros

  • Complete 15-piece kit with 7 color-coded aluminum alloy bending heads
  • Supports forward and reverse 90-degree bending in confined workshop areas
  • Includes a tube cutter, deburring tool, 2 reverse bender adapters, and 2 universal crossbars
  • Extra-long handle provides leverage for smooth, one-handed ratcheting action

Cons

  • No warranty term is stated in the listing
  • Notes that stiffer materials may require warming before bending
  • Newer brand first listed in September 2025 with a shorter market history

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Bending style OD capacity Max bend angle Dies included Item weight Warranty
VEVOR 1/4-7/8 Ratcheting Tube Bender 9.6/10 Ratcheting forward/reverse 1/4 in to 7/8 in 90 degrees 7 dies (1/4 to 7/8 in) 10.7 lb Not stated
CARVALAX 1/4-7/8 Color Head Bender 9.6/10 Ratcheting forward/reverse 1/4 in to 7/8 in 90 degrees 7 heads (1/4 to 7/8 in) 11.97 lb Not stated
Super Stars 78489 3-in-1 Tubing Bender 9.6/10 3-in-1 manual lever 1/4 in, 5/16 in, 3/8 in 180 degrees 3 fixed channels 1.3 lb Not stated
Beaiguna PB-001 15-Piece Tube Bender 9.5/10 Ratcheting forward/reverse 1/4 in to 7/8 in 90 degrees 7 heads (1/4 to 7/8 in) 11.16 lb Not stated

Ratings in this table are the makers’ own claims taken from each product page (13 October 2026). Where a listing states a figure two ways, the table shows both.

Buying guide: what matters in the best tube bender under 100

Ratcheting kit versus manual lever bender

The four picks divide into two distinct mechanical designs: multi-die ratcheting kits and dedicated manual lever benders. Ratcheting benders use a mechanical drive with an extra-long handle to advance interchangeable dies into tubing against two stationary support blocks. This design provides high mechanical leverage and allows one-handed operation in tight enclosures. A manual lever bender uses fixed grooved channels and two pivoting lever arms that you draw together by hand, offering continuous tactile feedback throughout the sweep.

Outer diameter capacity and die sizes

Size coverage determines which lines you can run. The ratcheting kits from VEVOR, CARVALAX, and Beaiguna each include seven interchangeable bending heads covering 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, and 7/8 inch outer diameter tubing. In contrast, the Super Stars manual lever tool is a dedicated 3-in-1 model designed specifically for 1/4 inch, 5/16 inch, and 3/8 inch (6 mm, 8 mm, and 10 mm) lines. If your work includes larger refrigeration or heating lines above 3/8 inch, choose a seven-die ratcheting kit; for small automotive lines, see our guide on a tube bender for brake lines.

Maximum bend angle: 90 degrees versus 180 degrees

Ratcheting benders are designed for bends up to 90 degrees, which handles standard 90-degree elbows and routing around square frame members. However, making a full return or 180-degree U-bend with a ratcheting tool requires multiple sequential steps and generous clearance. The Super Stars lever bender achieves a full 180 degrees in a single pass. It utilizes a patented quick-action trigger release that repositions its two-stage handle midway through the bend when the handles meet, eliminating handle clash and maintaining leverage all the way to 180 degrees.

Forward and reverse bending in tight quarters

Standard forward bending pushes the die forward into the tubing toward the tool handle. In tight chassis locations, against walls, or inside crowded engine bays, the tool body can collide with adjacent components. The VEVOR, CARVALAX, and Beaiguna kits include reverse bending adapters that reverse the orientation, pushing the die away from the tool body so you can bend tubing from the opposite direction in narrow spots.

Tubing metal and wall thickness

Hand-powered benders under 100 dollars are primarily intended for soft metals. VEVOR specifies its tool for soft copper and aluminum tubing. CARVALAX and Beaiguna state capability on soft copper, aluminum, PVC, and thin-walled or light-wall stainless steel tubing. Both manufacturers note that for stiffer materials, tubing may need warming before bending to prevent kinking or flattening. For heavy-wall structural projects or schedule pipe, read our guides on a tube bender for stainless steel and the best tube bender for hobby fabrication.

Included tooling: cutters, reamers, and deburrers

Clean preparation prevents bad bends. The ratcheting kits include essential preparation accessories right in the storage case. VEVOR supplies a bearing-type pipe cutter, deburring tool, and inner/outer reamer. CARVALAX and Beaiguna both include a tube cutter, deburring tool, and carrying case. If you also notch tube ends for welding fit-up, pair these with our guide to the best tubing notcher.

Warranty and safety listings

None of the four listings states a written warranty term or a third-party electrical or workshop safety certification. When selecting an uncertified manual hand tool, verify casting thickness, pivot pin fit, and die tolerances as soon as the package arrives.

Bending safety. Manual tube bending applies mechanical leverage to metal tubing, dies, and handles. Wear sturdy work gloves and eye protection to protect against sharp burrs from freshly cut tube ends and slipping lever arms. Always deburr tube edges before seating tubing in bending dies to avoid binding or gouging the tooling. See our Safety Disclaimer.

Before You Strike an Arc

  • Check all die grooves, crossbars, and reverse adapters upon unboxing to confirm casting edges are deburred and pivot pins slide smoothly.
  • Verify the stamped die size matches the actual outer diameter of your tubing before applying ratcheting pressure to prevent crushing soft lines.
  • Apply a drop of light machine oil to the die face and sliding blocks to reduce friction during high-angle bends.
  • For stiffer materials like thin-wall stainless or PVC, heed maker notes on warming the workpiece before forcing a full bend.

FAQ for welders

Can a ratcheting tube bender handle steel or stainless tubing?

CARVALAX and Beaiguna list light-wall and thin-walled stainless steel tubing alongside soft copper and aluminum. However, both manufacturers note that warming the tubing may be necessary before bending stiffer materials. Manual hand-powered benders in this price bracket are primarily engineered for soft copper and aluminum lines.

What is the difference between forward and reverse tube bending?

Forward bending pushes the die into the tubing toward the tool body, which works well on an open workbench. Reverse bending uses adapters to push the die outward, letting you make bends inside tight chassis bays, floor enclosures, or close to walls where handle swing is limited. Three of the four kits here include reverse bending adapters.

Why choose a lever bender over a ratcheting die kit?

A 3-in-1 lever bender like the Super Stars tool reaches up to 180 degrees in a single continuous sweep and weighs only 1.3 pounds. Ratcheting kits top out at 90 degrees per bend but cover larger outer diameters up to 7/8 inch with interchangeable dies. Choose the lever tool for small lines up to 3/8 inch that require tight return bends.

What tubing sizes do these benders cover?

The ratcheting kits from VEVOR, CARVALAX, and Beaiguna each include seven dies covering 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, and 7/8 inch outer diameter tubing. The compact Super Stars lever bender handles 1/4 inch, 5/16 inch, and 3/8 inch (6 mm, 8 mm, and 10 mm) lines.

Do these tube benders require an external power source?

No, all four models are hand-powered manual tools with extra-long handles or lever arms for mechanical advantage. They require no air compressor, hydraulic pump, or electrical supply, making them portable for field repairs and small fabrication shops.

Related: best tube bender for hobby fabrication for heavier shop projects, tube bender for brake lines, tube bender for stainless steel, and our best tubing notcher guide. Also see the metal fab tools category page, our guide on how to use a shrinker stretcher, how to use bead roller, and best welding table for home shop.

Scoring, line by line

Each tool is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
VEVOR 1/4-7/8 Ratcheting Tube Bender 9.6 30 21 21 n/a 0
CARVALAX 1/4-7/8 Color Head Bender 9.6 29 21 20 n/a 0
Super Stars 78489 3-in-1 Tubing Bender 9.6 28 20 20 n/a 0
Beaiguna PB-001 15-Piece Tube Bender 9.5 28 20 19 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides

Metal Fab Tools ·

Manual Square Tube Bender: Choosing One

A manual square tube bender shapes square tube into curves and angles by hand, and the right type depends on the bend shape, the…

Metal Fab Tools ·

Best Tube Bender for Copper Pipe (2026)

Three tube benders for copper pipe compared by size range, bend angle and dies, from a 180-degree ratchet kit to forward-reverse kits.