Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Layout Fluid vs Soapstone: Which One Should You Buy?

Layout fluid vs soapstone for marking metal, with the listed layout fluids compared by size, color and applicator, and the soapstone side left out because no soapstone marker is listed.

Layout Fluid vs Soapstone: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1CRC Truetap HD Cutting Fluid 03400CRC Truetap HD Cutting Fluid 034009.7/10View on Amazon
  2. 2Metal Cutting Oil Cutting Fluid for Machine ShopsMetal Cutting Oil Cutting Fluid for Machine Shops9.6/10View on Amazon
  3. 3TapMagic 16 oz. Can New Improved Cutting Fluid Brand: TapTapMagic 16 oz. Can New Improved Cutting Fluid Brand: Tap9.6/10View on Amazon
  4. 4Dykem Layout Fluid BlueDykem Layout Fluid BlueView on Amazon
  5. 5Dykem 04968 Red Layout FluidDykem 04968 Red Layout FluidView on Amazon
  6. 6Dykem Steel Blue Layout FluidDykem Steel Blue Layout FluidView on Amazon
  7. 7Layout FluidLayout FluidView on Amazon
  8. 8Dykem Steel Red Layout FluidDykem Steel Red Layout FluidView on Amazon
  9. 9Dykem Layout FluidDykem Layout FluidView on Amazon

Marking a cut line on steel starts with a surface the scribe can bite into, and that is where layout fluid vs soapstone comes in. The markers here cover layout fluid only: every marker here is a layout fluid, and no soapstone marker is among them. That leaves a clear answer for this comparison: layout fluid is the marking method the markers here support, and the choice among them comes down to size, color and applicator.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Below: what layout fluid does, the listed fluids side by side, when layout fluid is the better choice, and how to pick a fluid.

Layout Fluid vs Soapstone: What the Markers Here Cover

Layout fluid is a dye that coats metal so scribe lines show clear and sharp. The blue Dykem fluid coats metal to give a glare-free, uniform color, dries in minutes, and leaves a thin film without cracking or chipping. The same fluid can also mark other surfaces to reveal defects or pinholes, and to view gear tooth contact pattern. Soapstone is the other side of this comparison, but no soapstone marker, size, color or applicator is stated here, so this guide compares the layout fluids that are listed and says plainly where the soapstone side is not covered.

Side by Side

Pick Size Color Applicator Drying
Dykem Layout Fluid Blue 8 oz 8 oz Blue Brush in cap Dries in minutes
Dykem Layout Fluid Red 8 oz 8 ounces Red Brush-in-cap bottle Not stated
MOLLIFII Layout Fluid Steel Blue 2 fl oz 2 fl oz Blue Felt applicator bottle Not stated
Dykem Layout Fluid Red 31.5 oz 31.5 oz Red Not stated Not stated

The table shows the size, color, applicator and drying time the maker states for each fluid. Where no drying time or applicator is stated, the table says so rather than guessing.

When Layout Fluid Is the Better Choice

  • Sharp scribe lines. The blue Dykem fluid gives a glare-free, uniform color so scribes appear clear and sharp, which is the whole point of layout work.
  • A thin film that dries fast. The blue Dykem fluid dries in minutes and leaves a thin film without cracking or chipping.
  • More than layout work. The same fluid can mark other surfaces to reveal defects or pinholes, and to view gear tooth contact pattern.
  • Choice of size and color. The markers here come in blue and red, in 2 fl oz, 8 oz and 31.5 oz sizes, so the size can match the job.

For the soapstone side of marking, see the related comparison of a metal scribe vs soapstone marker.

How the Listed Fluids Differ

The markers here cover blue and red fluids, in 2 fl oz, 8 oz and 31.5 oz sizes, with brush-in-cap and felt applicator bottles, and the 31.5 oz bottle states no applicator. The differences are size, color and applicator, not the job itself: every fluid here is a layout fluid for marking metal.

Dykem Layout Fluid Blue 8 oz. The blue fluid in a brush-in-cap can, made to coat metal with a glare-free, uniform color so scribes appear clear and sharp. It dries in minutes and leaves a thin film without cracking or chipping, and it can also mark other surfaces to reveal defects or pinholes or view gear tooth contact pattern.

Dykem Layout Fluid Red 8 oz. The red fluid in a brush-in-cap bottle, in the same 8 oz size as the blue. The maker states the color as steel red.

MOLLIFII Layout Fluid Steel Blue 2 fl oz. The smallest size here, a steel blue fluid in a felt applicator bottle, with the container size stated as 2 fl oz.

Dykem Layout Fluid Red 31.5 oz. The largest size here, a red fluid in a bottle, stated as toluene free, that leaves a thin film without cracking or chipping. The bottle weighs 1.0 pounds.

How to Pick a Fluid

  • Match the size to the job. The 2 fl oz bottle suits a small batch of marks, the 8 oz brush-in-cap bottles suit regular layout work, and the 31.5 oz bottle suits a shop that marks metal often.
  • Pick the color by the metal. Blue and red are the colors listed; the blue fluid is stated to give a glare-free, uniform color, while the red fluids state no such finish claim.
  • Pick the applicator by the mark. Brush in cap for coating a layout area and the felt applicator bottle for a small mark; the 31.5 oz bottle states no applicator, so check the label on arrival.
  • Check the label on arrival. The 31.5 oz bottle is stated as toluene free; confirm the fluid in hand matches the size and color ordered.

Layout fluid safety. Work with ventilation, keep the fluid off skin, and follow the label on the bottle. The 31.5 oz Dykem fluid is stated as toluene free.

FAQ for welders

What does layout fluid do?

The blue Dykem fluid coats metal with a thin, glare-free film so scribe lines show clear and sharp, and the same fluid can also mark other surfaces to reveal defects or pinholes and to view gear tooth contact pattern.

How long does layout fluid take to dry?

The blue Dykem fluid dries in minutes. The other fluids here state no drying time, so check the label on the bottle before handling a marked part.

What sizes of layout fluid are listed here?

The sizes are 2 fl oz, 8 oz and 31.5 oz. The 2 fl oz size is the MOLLIFII steel blue fluid, the 8 oz sizes are the blue and red Dykem brush-in-cap fluids, and the 31.5 oz size is the red Dykem bottle.

What colors of layout fluid are listed here?

Blue and red. The blue fluids are the Dykem blue 8 oz and the MOLLIFII steel blue 2 fl oz, and the red fluids are the Dykem red 8 oz and the Dykem red 31.5 oz.

Can layout fluid mark anything besides metal?

Yes, in the blue Dykem fluid’s stated uses: it can mark other surfaces to reveal defects or pinholes, and to view gear tooth contact pattern.

Is there a soapstone marker in this comparison?

No. No soapstone marker is among the markers here, so the comparison covers layout fluid only, and the soapstone side is not covered by the markers in this guide.

Related: metal scribe vs soapstone marker and how to choose a MIG welder.

More buying guides