Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

WEN 3650 Review: Pros, Cons & Who It’s For

A WEN 3650 review from the listing: an 18-gauge 4-amp swivel head electric metal shear, with its cut ratings, spec gaps and who it suits.

WEN 3650 Review: Pros, Cons & Who It’s For
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1WEN 3650 Variable Speed Swivel Head Electric MetalWEN 3650 Variable Speed Swivel Head Electric Metal9.4/10View on Amazon
  2. 2WEN 9-Inch Band SawWEN 9-Inch Band SawView on Amazon
  3. 3WEN 2.3-Amp 8-Inch 5-Speed Cast Iron Benchtop Drill PressWEN 2.3-Amp 8-Inch 5-Speed Cast Iron Benchtop Drill PressView on Amazon
  4. 4WEN BG4260 2.1-Amp 6-Inch Single Speed Bench GrinderWEN BG4260 2.1-Amp 6-Inch Single Speed Bench GrinderView on Amazon
  5. 5WEN Drill Press ViseWEN Drill Press ViseView on Amazon
  6. 6WEN 6800-Watt Dual Fuel RV-Ready Electric Start PortableWEN 6800-Watt Dual Fuel RV-Ready Electric Start PortableView on Amazon
  7. 7WEN 5600-Watt Portable GeneratorWEN 5600-Watt Portable GeneratorView on Amazon

When you have thin body panels, floor pans or ductwork clamped to the fab table, reaching for an angle grinder or a plasma torch often creates more cleanup than the cut is worth. Sparks ruin glass, plasma dross takes time to grind off, and cutoff wheels warp thin edges. That is where an electric shear earns its hook on the wall, and this WEN 3650 review looks at how WEN’s 4-amp corded model fits into a small fab or home shop. The tool is rated for 18-gauge sheet metal and 20-gauge stainless steel. We have not used this shear ourselves; this review is based on WEN’s Amazon listing for the 3650 and the specs published there.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The shear

WEN 3650 Variable Speed Swivel Head Electric Metal

WEN 3650 Variable Speed Swivel Head Electric Metal

WEN9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-amp corded electric metal shear with a 360-degree swiveling head, variable speed trigger from 0 to 2500 SPM, and rated capacities of 18-gauge sheet metal and 20-gauge stainless steel.

Pros

  • Rated to cut up to 18-gauge sheet metal and 20-gauge stainless steel
  • Pressure-sensitive trigger provides variable speed from 0 to 2500 strokes per minute
  • Swiveling head rotates a full 360 degrees for cutting at different angles
  • Stated 2-year warranty coverage from WEN

Cons

  • Listing does not state any UL, ETL or CSA safety certification
  • Power cord length and replacement blade availability are not stated
  • Motor is limited to 4 amps for light-gauge sheet metal rather than heavy plate

Other welders and gear to compare

WEN 3650 review: the short verdict

The WEN 3650 is a corded electric metal shear that cuts sheet stock by shearing, and WEN states its 4-amp motor curls the metal as it cuts. Its model number on the listing is 3650, and WEN lists it as an 18-gauge variable speed swivel head electric metal shear.

Three stated features carry the primary case for it. The swiveling cutter head rotates a full 360 degrees, allowing you to turn the cutting angle without twisting your arms or binding sheet metal on the table. The pressure-sensitive trigger gives variable speed control from 0 to 2500 strokes per minute, which helps when creeping into a scribe line or carving gentle curves. Additionally, WEN states a 2-year warranty description for the tool, providing 2 years of coverage.

The clear weakness lies in listing quality control and omitted details. The Amazon spec table contains bizarre errors, listing cellphone compatibility, 9H hardness, and a 3.1-inch screen size on this power tool. Furthermore, the listing states no UL, ETL, or CSA safety certification, gives no power cord length, and omits replacement blade part numbers. Buyers need to verify these missing details before purchase.

Key specs

Model Motor Capacity Speed
WEN 3650 4-amp 18 gauge sheet metal 0 to 2500 SPM

All specs here repeat what the maker rates and the listing prints, copied down 15 October 2026. Gauge ratings follow standard sheet metal sizing, where lower gauge numbers represent thicker metal stock.

What the WEN 3650 does well

Full 360-degree swivel head

The cutter head swivels a full 360 degrees. When making long cuts across wide sheet panels or trimming sheet stock clamped to the fab table, you can adjust the head orientation rather than wrestling the entire 4.7-pound tool at an awkward angle. Rotating the head allows you to align the cutting direction with your layout line while keeping your grip level and balanced.

Variable speed control from 0 to 2500 SPM

WEN equips the 3650 with a pressure-sensitive trigger running from 0 to 2500 strokes per minute. Light finger pressure allows slower feed rates when starting a cut, steering through gentle curves, or approaching layout marks. Squeezing the trigger fully delivers 2500 SPM for fast straight rip cuts down full sheets.

Shearing action that curls the metal

WEN notes that the 4-amp motor curls the metal as it cuts. If you plan to mig weld thin sheet metal without burning through, account for that curled waste strip when laying out the cut line.

Lightweight build for reduced fatigue

The tool weighs 4.7 pounds according to the listing spec table, which WEN describes as a lightweight design to limit user fatigue. For overhead duct cuts or repetitive shearing along large panels, a 4.7-pound tool is easy to handle while guiding sheet stock on the bench.

Limitations

  • Spec table errors on listing: the Amazon listing spec table includes cellphone specifications, listing 9H hardness, a 3.1-inch screen size, and cellphone device compatibility. These copy errors mean buyers cannot rely solely on the listing spec table.
  • No safety certifications stated: the listing does not publish UL, ETL, or CSA safety certifications. Shops requiring documented safety marks for corded tools must contact WEN directly.
  • Cord length and spare blades not stated: the listing omits the length of the electrical power cord and does not list part numbers for replacement cutter blades.
  • Curled waste strip: WEN states that the tool curls the metal as it cuts. This curled waste strip deforms as it clears the blades, so you must account for the kerf width when laying out your cut line.
  • Limited to light gauges: with rated limits of 18 gauge in sheet metal and 20 gauge in stainless steel, the 4-amp motor lacks the power for thicker sheet or plate. Cutting thicker stock requires cutting equipment rated for that thickness.

How we scored it

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
WEN 3650 9.4 29 19 21 0 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.

The Gear Score weighs performance, build, value, safety and warranty, as explained on our how we pick page. The WEN 3650 earns solid marks on performance for its 4-amp motor, 0 to 2500 SPM variable trigger, and 360-degree head rotation. Build reflects a functional tool held back by listing contradictions, while value remains strong for light shop fabrication. Safety scores zero because no safety certification is stated on the listing, and warranty earns points for its stated 2-year term.

Who should buy the WEN 3650, and who should skip it

Buy it if

  • You cut 18-gauge sheet metal or 20-gauge stainless steel for body panels, HVAC ducts, or decorative metal projects.
  • You want straight cuts or broad curves from a shear rather than a torch or cutoff wheel.
  • You need a 360-degree swivel head to reach awkward angles without twisting your wrists.
  • You prefer variable speed control from 0 to 2500 SPM to feather your cutting pace on fine lines.

Skip it if

  • You regularly cut metal thicker than 18 gauge, such as structural plate or heavy stock.
  • Your shop policy requires confirmed UL, ETL, or CSA certification marks on paper.
  • You need tight inside radiuses or corrugated profile cuts; see our best electric metal nibbler guide for tools suited to tight turns.
  • You require cordless portability for remote field work away from electrical outlets.

Alternatives

  • Electric nibblers for tight turns: if your project demands tight radius cuts or corrugated panel profiles, an electric sheet metal nibbler cuts from a punch rather than shear blades.
  • Drill-powered cutters: for occasional thin sheet trims without buying a dedicated corded tool, a metal nibbler for drill chucks into a standard drill.
  • Grinders for heavier plate: when metal thickness exceeds 18 gauge, a power grinder from our best angle grinder guide cuts through plate steel.

Before You Strike an Arc

Before making your initial cut and preparing sheet metal for the welding bench, run through these essential checks:

  • Inspect cord and housing: check the power cord, plug prongs, and 4.7-pound tool housing for shipping damage before plugging into power.
  • Verify metal thickness: check your material with a sheet metal gauge to ensure it does not exceed 18 gauge for mild steel or 20 gauge for stainless steel, preventing motor stalls.
  • Lock the swivel head: confirm the 360-degree rotating cutter head is clamped securely at your preferred angle before starting the motor.
  • Clean sheared edges: wipe off any cutting oil and deburr edges before fit-up and striking an arc on your welding project.

FAQ for welders

How thick can the WEN 3650 metal shear cut?

The listing rates the WEN 3650 to cut up to 18-gauge sheet metal and 20-gauge stainless steel. It is designed for sheet metal, auto body patches, and HVAC ducting rather than structural plate. Cutting stock thicker than rated limits risks jamming the blades and overloading the 4-amp motor.

Can the head on the WEN 3650 rotate?

Yes. The WEN 3650 features a swiveling cutter head that rotates a full 360 degrees. This allows you to orient the blades to your cutting path while keeping the grip comfortable, preventing awkward arm angles when cutting wide sheet stock.

Does the WEN 3650 have variable speed?

Yes. The tool features a pressure-sensitive trigger delivering variable cutting speeds from 0 to 2500 strokes per minute. Light trigger pressure allows controlled starts on scribe lines, while pulling fully delivers 2500 SPM for fast rip cuts.

What warranty comes with the WEN 3650?

The listing states a 2-year warranty description for the WEN 3650. WEN lists 2 years of warranty coverage from purchase. Always check with WEN support directly regarding spare blade availability and warranty service procedures.

Related: best electric metal nibbler, best sheet metal nibbler, how to mig weld thin sheet metal without burning through, and the metal fab tools hub.

More buying guides