Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Air Rivet Gun (2026): 4 Pneumatic Picks Compared

4 pneumatic rivet guns compared by pull force, nosepieces and kit contents, from a 500-rivet kit to a cased shop gun.

Best Air Rivet Gun (2026): 4 Pneumatic Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Proster 500-Rivet KitBest OverallProster 500-Rivet Kit9.7/10View on Amazon
  2. 2Proster 3924LBF RiveterStrongest PullProster 3924LBF Riveter9.7/10View on Amazon
  3. 3JUSTOOL 3097LBF RiveterBest Kit ValueJUSTOOL 3097LBF Riveter9.7/10View on Amazon
  4. 4WINTOOLS Rivet GunSimplest PickWINTOOLS Rivet Gun9.5/10View on Amazon

A trailer panel that needs fastening, a gutter joint that will not wait for a hand tool, a duct section that needs rivets driven fast: the best air rivet gun turns shop air into set rivets without wearing out the hand that feeds it.

We compared 4 pneumatic rivet guns by pull force, nosepieces, rivet range, kit contents and warranty, using only what each listing publishes.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Proster 500-Rivet Kit: 5 nosepieces, 500 rivets in 5 sizes, 18 months warranty Check price on Amazon
  • Strongest Pull Proster 3924LBF Riveter: 3924 LBF pull force, 5 nozzles, collection bottle Check price on Amazon
  • Best Kit Value JUSTOOL 3097LBF Riveter: 3097 LBF, 4 nozzles, wrenches and bottle, 18 months warranty Check price on Amazon
  • Simplest Pick WINTOOLS Rivet Gun: 4 nose pieces, case included, sets rivets up to 3/16 inch Check price on Amazon

The machines

Proster Pneumatic Rivet Gun Kit 5 Nosepieces

Proster Pneumatic Rivet Gun Kit 5 Nosepieces

Proster9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pneumatic rivet gun kit with 5 nosepieces, 500 rivets in 5 sizes, spare jaws and an 18 months warranty.

Pros

  • 5 nosepieces cover 3/32 inch to 1/4 inch rivets
  • 500 rivets in 5 sizes included for immediate use
  • 3-claw design with 360-degree grip and spare jaws included
  • Aircraft-grade aluminum body with a silencer for quick riveting

Cons

  • No pull force figure is stated
  • Not for stainless steel rivets, per the listing
  • Spec line lists 4 specifications against 5 nosepiece sizes in the bullets
  • No air pressure range is stated
Heavy Duty Pneumatic Rivet Gun 3097LBF Air Rivet

Heavy Duty Pneumatic Rivet Gun 3097LBF Air Rivet

JUSTOOL9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A heavy-duty pneumatic rivet gun with 4 nozzles, 3097 LBF pull force, wrenches and a bottle, with an 18 months warranty.

Pros

  • 3097 LBF pull force with an air-hydraulic drive
  • 4 interchangeable heads cover 3/32 inch to 3/16 inch rivets
  • 2 wrenches, 3 claws and a collection bottle included
  • Ergonomic handle with a firm grip for extended use

Cons

  • No 1/4 inch nosepiece is stated; the range ends at 3/16 inch
  • No silencer is stated
  • Yellow and Blue are the only stated colors
  • Air pressure must stay in the 6.2-8 bar range, per the listing
Proster Pneumatic Rivet Gun Air Riveters 3924LBF 5

Proster Pneumatic Rivet Gun Air Riveters 3924LBF 5

Proster9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pneumatic rivet gun with 3924 LBF pull force, 5 nozzles, a collection bottle and spare jaws.

Pros

  • 3924 LBF pull force at 6-8 kg air pressure, the highest stated here
  • 5 nozzles cover 3/32 inch to 1/4 inch rivets
  • Collection bottle catches spent mandrels for easy cleanup
  • Spare jaws included for continuous use

Cons

  • No warranty term is stated
  • Not for stainless steel rivets, per the listing
  • Bullets claim a 16 mm maximum stroke while the Q and A describes a 10 mm stroke needing 2 pulls for 10-16 mm rivets
  • No rivets are stated as included
Pneumatic Air Hydraulic Pop Rivet Gun Riveter

Pneumatic Air Hydraulic Pop Rivet Gun Riveter

WINTOOLS9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pneumatic rivet gun with 4 nose pieces, a case, and stated air fittings, setting rivets up to 3/16 inch.

Pros

  • 4 nose pieces cover 3/32 inch to 3/16 inch rivets
  • Case included for storage and transport
  • 1/4 inch NPT inlet with 3/8 inch hose fitting stated
  • Sets rivets up to 3/16 inch at 3 cfm average air consumption

Cons

  • No warranty term is stated
  • No pull force figure is stated
  • No rivet material guidance is stated
  • No spare jaws or collection bottle is stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Pull force Nosepieces Rivet range Warranty
Proster 500-Rivet Kit 9.7/10 Not stated 5 3/32″-1/4″ 18 months
JUSTOOL 3097LBF Riveter 9.7/10 3097 LBF 4 3/32″-3/16″ 18 months
Proster 3924LBF Riveter 9.7/10 3924 LBF 5 3/32″-1/4″ Not stated
WINTOOLS Rivet Gun 9.5/10 Not stated 4 Up to 3/16″ Not stated

Ratings in this table are the makers’ own claims taken from each product page (25 October 2026).

Buying guide: choosing the best air rivet gun

Pull force and stroke

Pull force decides which rivets break cleanly. The Proster 3924 gun states 3924 LBF at 6-8 kg air pressure, and the JUSTOOL gun states 3097 LBF, while the Proster kit and the WINTOOLS gun state no pull force figure. Stroke matters too: the Proster 3924 bullets claim a 16 mm maximum stroke, while its Q and A describes a 10 mm stroke needing 2 pulls for 10-16 mm mandrels, so check the mandrel length before pulling. For long mandrels, plan on 2 pulls.

Nosepieces and rivet sizes

Nosepieces decide which rivet sizes a gun sets. The Proster guns carry 5 nosepieces from 3/32 inch to 1/4 inch, while the JUSTOOL and WINTOOLS guns carry 4 heads from 3/32 inch to 3/16 inch. Match the nosepiece to the rivet: a 1/4 inch rivet needs a Proster gun here, since the JUSTOOL and WINTOOLS ranges end at 3/16 inch. Stainless steel rivets are excluded by the Proster listings, so check the rivet material before buying.

Air supply and fittings

All 4 guns run on shop air. The Proster and JUSTOOL guns use a U.S.-specification air inlet, while the WINTOOLS gun states a 1/4 inch NPT inlet with a 3/8 inch hose fitting and 3 cfm average air consumption. The JUSTOOL listing states a 6.2-8 bar pressure range, and the Proster 3924 listing states 6-8 kg air pressure, so a regulated supply in range matters more than raw compressor size. See the pneumatic vs electric rivet gun comparison for the air versus cordless choice.

What the kit includes

Kit contents decide what else to buy. The Proster kit includes 500 rivets in 5 sizes with spare jaws, while the Proster 3924 gun includes spare jaws and a collection bottle without stated rivets. The JUSTOOL kit includes 2 wrenches, 3 claws and a collection bottle, and the WINTOOLS gun includes a case. Warranties split the group: the Proster kit and the JUSTOOL gun state 18 months, while the Proster 3924 and WINTOOLS guns state no warranty term.

Use as directed. Wear goggles, ear protection and gloves, keep air pressure in the range the listing states, and clamp the workpiece before pulling, per the JUSTOOL listing. Never pull a rivet with a loose workpiece, and never exceed the pressure range the listing states.

Before You Strike an Arc

  • Check the air fitting: the Proster and JUSTOOL guns use a U.S.-specification air inlet, while the WINTOOLS gun uses a 1/4 inch NPT inlet.
  • Match the nosepiece to the rivet size before pulling, from 3/32 inch to 1/4 inch on the Proster guns and to 3/16 inch on the JUSTOOL and WINTOOLS guns.
  • Check the spare jaw set is in the case on arrival, where included.
  • Order rivets to match the gun, since only the Proster kit states included rivets, 500 in 5 sizes.
  • Check the collection bottle is fitted before pulling, where included.

FAQ for welders

How do you set up a pneumatic rivet gun?

Fit the nosepiece that matches the rivet size, connect the U.S.-specification air inlet or the 1/4 inch NPT inlet to a regulated supply, and check the spare jaws and collection bottle are fitted where the listing includes them. The JUSTOOL listing states a 6.2-8 bar range, and the Proster 3924 listing states 6-8 kg air pressure, so keep the supply in the range the gun states.

How do you fix a rivet gun that will not break a rivet?

Check the air pressure is in the range the listing states, match the nosepiece to the rivet size, and for mandrels of 10-16 mm, pull 2 times, per the Proster Q and A. If the jaws slip, fit the spare jaw set where included.

What size rivets do these air rivet guns set?

The Proster guns set 3/32 inch to 1/4 inch rivets, and the JUSTOOL and WINTOOLS guns set 3/32 inch to 3/16 inch rivets. The WINTOOLS gun sets rivets up to 3/16 inch, and the Proster kit includes 500 rivets in 5 sizes from 2.4 mm to 6.4 mm.

Can you use stainless steel rivets in these guns?

No, for the Proster guns: the Proster listings state not to use stainless steel rivets, and list steel, iron and aluminum rivets instead. The JUSTOOL listing lists aluminum, steel and iron rivets, and the WINTOOLS listing states no rivet material guidance, so match the rivet material to the listing before buying.

Related: rivet gun air tool hub, pneumatic vs electric rivet gun, best rivet gun kit, and best rivet gun for steel rivets.

Scoring, line by line

Each gun is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None of the 4 guns states an electrical safety listing, so every safety score is zero, and the ranking comes from the other criteria. 2 guns state an 18 months warranty, and 2 state no warranty term, which is where the ranking separates.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Proster 500-Rivet Kit 9.7 30 21 22 n/a 2
JUSTOOL 3097LBF Riveter 9.7 30 21 21 n/a 2
Proster 3924LBF Riveter 9.7 32 21 21 n/a 0
WINTOOLS Rivet Gun 9.5 27 20 19 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides

Metal Fab Tools ·

Rivet Gun Sizes: Which One to Buy

Rivet gun size means matching the gun, nose piece and pull force to the rivet diameter, and this guide shows how 3/32, 1/8, 5/32…

Metal Fab Tools ·

Rivet Gun Tips for Cleaner Rivets

Rivet gun tips for cleaner, tighter rivets: match the nose piece to the rivet, keep the gun square to the work, and clear jams…

Metal Fab Tools ·

Rivet Gun Parts and What Each Does

The nosepiece, jaws, handle and mandrel each do one job on a rivet gun, and the kits here cover the common sizes for shop…