Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Parts Washer Large: A 20-Gallon Tank and the Fluid for Shop Use

A parts washer large enough for shop work has a 20-gallon tank with a 317 gph pump, and a water-based fluid that cuts grease without harming the parts.

Parts Washer Large: A 20-Gallon Tank and the Fluid for Shop Use
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Parts Washer [20-Gallon Tank] | Solvent CapacityParts Washer [20-Gallon Tank] | Solvent Capacity9.5/10View on Amazon
  2. 2Oil Eater Parts Washer FluidOil Eater Parts Washer Fluid9.4/10View on Amazon

Greasy brackets, oily bolts and a gearbox cover caked in grime land on the bench after a teardown, and hand scrubbing them eats the afternoon. A parts washer large enough for shop work is a tank you can drop those parts into, with a pump that moves cleaning fluid over them while you get on with the next job. This guide shows what size tank fits shop parts and how to match a fluid to the washer.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Parts Washer [20-Gallon Tank] | Solvent Capacity

Parts Washer [20-Gallon Tank] | Solvent Capacity

JEGS9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20-gallon tank with a 12-gallon solvent capacity and a 317 gph pump, sized for small parts and shop projects.

Pros

  • 20-gallon tank with a 12-gallon solvent capacity for small parts
  • 317 gph pump output moves fluid over the parts
  • Removable tray for versatility and easy clean-up
  • Compact design made to save workbench space

Cons

  • Sized for small parts, so large assemblies will not fit the tank
  • Warranty is 30 days, a short term
  • 57 pounds to lift onto the bench
  • Needs a 110V outlet, so placement depends on shop power
Oil Eater Parts Washer Fluid

Oil Eater Parts Washer Fluid

Oil Eater9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-gallon water-based fluid that is pH neutral and safe for microbe washers and heated systems.

Pros

  • Water-based, biodegradable and pH neutral
  • Safe for smart washers and microbe-based parts washers
  • Nutrient package feeds microbe colonies that eat fats, oils and greases
  • Heat tolerant formula for heated systems, vats and equipment

Cons

  • Fluid only; a washer tank is still needed
  • No warranty term is stated
  • A 5-gallon pail to lift and pour
  • Water-based formula suits water-based and microbe washers, not solvent tanks

What a large parts washer is

A large parts washer is a tank that holds shop parts and a pump that keeps fluid moving over them. The tank in this guide holds 20 gallons, with a 12-gallon solvent capacity, and its pump moves 317 gallons per hour on a 110V/60Hz supply. The fluid is the other half of the choice: a water-based, pH neutral fluid in a 5-gallon pail, made for smart washers and microbe-based parts washers, with a nutrient package that feeds the microbes that eat fats, oils and greases.

Check the capacity figure when you size the tank, not the tank size alone: a 20-gallon tank with a 12-gallon solvent capacity takes 12 gallons of fluid in use. A removable tray adds versatility and eases clean-up, and the compact design is made to save workbench space.

A parts washer large enough for shop work

The gear below covers the two halves of the choice: the tank and pump that hold and wash the parts, and the fluid that cuts the grease, but they are not a matched pair, since the tank lists a solvent capacity and the fluid is made for water-based and microbe washers.

The two picks side by side

JEGS 20-Gallon Parts Washer Oil Eater Parts Washer Fluid Notes
Type Tank with pump Water-based fluid Tank and fluid do different jobs
Tank 20 gallons No tank, fluid only Size the tank to the parts
Solvent capacity 12 gallons Not stated Tank figure is 12 gallons of solvent
Pump output 317 gph No pump, fluid only Pump moves fluid over parts
Power 110V/60Hz No power needed Tank needs an outlet
Weight 57 lb Not stated Tank weight is the moving weight
Warranty 30 days Not stated Short cover on the tank

The tank and the fluid do different jobs, so read the table down each column: the tank column is the hardware, the fluid column is the chemistry, and the notes column says which half of the job each row belongs to.

Solvent or water-based fluid

The tank lists a 12-gallon solvent capacity, and the fluid lists a water-based, pH neutral formula that is safe for smart washers and microbe-based parts washers. Match the fluid to the washer system, and do not treat the two picks as a matched pair: the fluid in this guide is made for water-based and microbe washers, while the tank in this guide lists a solvent capacity, so this fluid is not the fluid for this tank. The fluid in this guide is heat tolerant, so it works in heated systems, heated vats and heated equipment, and its nutrient package feeds microbe colonies that eat fats, oils, greases and odors.

How to size the tank for your parts

Measure the largest part against the tank before buying: the tank in this guide measures 30 inches long by 21 inches wide by 34.500 inches high, and it is made for small parts and projects. The tank weighs 57 pounds, so set the bench spot before it arrives, and keep the 110V/60Hz supply in mind when you pick the spot, since the pump needs mains power.

For more options, see our metal fab tools guides.

FAQ for welders

How big is a large parts washer?

The tank in this guide holds 20 gallons with a 12-gallon solvent capacity, and it is made for small parts and projects. Size the tank to the largest part you wash: the tank measures 30 inches long by 21 inches wide by 34.500 inches high.

What fluid goes in a parts washer?

Match the fluid to the washer: the fluid in this guide is water-based and pH neutral, made for smart washers and microbe-based parts washers, while the tank in this guide lists a 12-gallon solvent capacity. The fluid in this guide comes in a 5-gallon pail and is heat tolerant for heated systems, heated vats and heated equipment.

Does a parts washer need power?

The tank in this guide runs on a 110V/60Hz supply and its pump moves 317 gallons per hour. The fluid needs no power of its own; it is made for smart washers and microbe-based parts washers.

How heavy is a 20-gallon parts washer?

The tank in this guide weighs 57 pounds. Set the bench spot before it arrives, and remember solvent adds weight once the tank is filled.

Can a water-based fluid run in a heated washer?

Yes, when the fluid states it: the fluid in this guide is heat tolerant and works in heated systems, heated vats and heated equipment. Its nutrient package feeds microbe colonies that eat fats, oils, greases and odors, so it suits microbe-based washers as well.

Related: the best respirator for grinding metal picks, the best grinding disc for metal picks and the best welding blanket for auto body picks.

More buying guides