Types of Lathe Tools and Bits Explained
Turning, grooving, threading and boring holders explained, with 3 indexable kits that cover the jobs in 12mm and 10mm shanks.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
21Pcs Indexable Lathe Turning Tool Kit,3/8" 10mm9.7/10View on Amazon - 2
21Pcs Kit Indexable Lathe Turning Tool,1/2" 12mm9.6/10View on Amazon - 3
Indexable Lathe Turning Tool 21Pcs Kit 1/2'' 12mm9.6/10View on Amazon
Types of lathe tools break down by the job they do: turning, grooving, threading and boring, plus chamfering and parting. Each job has a holder shape and an insert. This guide explains each type and shows which holder handles which job.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

21Pcs Indexable Lathe Turning Tool Kit,3/8" 10mm
A 21-piece kit with a 10mm shank for bench lathes, covering turning, chamfering, grooving, parting, 60° threading and boring.
Pros
- 7 holders cover turning, chamfering, grooving, parting, threading and boring
- Matched 60° SER and SNR pair for external and internal threading
- 14 CVD-coated inserts, 2 per holder, with a wrench for every holder
- 10mm shank suits 7x10 to 8x14 bench lathes and metric quick-change posts
Cons
- 10mm shank is not a drop-in for a standard 3/8 inch English opening
- Boring bars need a bore large enough for bar plus insert
- No warranty term is stated
- No 12mm shank option in this kit

21Pcs Kit Indexable Lathe Turning Tool,1/2" 12mm
A 21-piece kit with a 1/2 inch shank for turning, grooving, threading and boring.
Pros
- 7 holders and 14 inserts for turning, grooving, threading and boring
- 1/2 inch shank fits most quick-change tool posts
- CVD coated carbide inserts for stainless steel, hard alloy, low carbon steel and cast iron
- Cemented carbide and tungsten steel holders for hardness and wear resistance
Cons
- No warranty term is stated
- No wrench is stated with the holders
- 12mm shank needs a post that takes 1/2 inch holders
- CVD coating is stated, with no TiN layer stated

Indexable Lathe Turning Tool 21Pcs Kit 1/2'' 12mm
A 21-piece kit with a 1/2 inch shank for turning, grooving, threading and boring.
Pros
- 7 holders and 14 inserts for turning, grooving, threading and boring
- Cemented carbide and tungsten steel holders
- CVD coated carbide inserts for stainless steel and tough alloys
- 24h service, a 3-month refund policy and 360-day support are stated
Cons
- 12mm shank needs a post that takes 1/2 inch holders
- No wrench is stated with the holders
- CVD coating is stated, with no TiN layer stated
- No 10mm shank option in this kit
Types of lathe tools in one paragraph
A lathe tool is a holder plus a replaceable carbide insert. The holder sets the angle and the job, and the insert does the cutting. Turning holders shape the outside diameter, grooving holders cut a narrow channel, threading holders cut a 60° thread, and boring bars cut inside a bore.
Side by side
| Turning | Grooving | Threading | Boring | |
|---|---|---|---|---|
| What it cuts | The outside diameter | A narrow channel, or the part off | A 60° thread, outside or inside | The inside of a bore |
| Holders in these kits | SCLCR, SDJCR, SDNCN | MGEHR, MGEHER | SER outside, SNR inside | SCLCR boring bar |
| Inserts | CVD coated carbide | CVD coated carbide | CVD coated carbide | CVD coated carbide |
| Shank | 12 mm or 10 mm | 12 mm or 10 mm | 12 mm or 10 mm | 12 mm or 10 mm |
Shank size decides the fit: check the tool post opening before ordering.
Turning tools
Turning is the main job: the holder feeds along the spinning work and takes the outside diameter down. The SCLCR, SDJCR and SDNCN holders in these kits handle turning, and the inserts are CVD coated carbide for smooth, wear-resistant cuts. The ZiBeiLe listing states its 12mm shank fits most quick-change tool posts, while the 10mm kit suits bench lathes. See the metal lathe for beginners guide.
Grooving and parting tools
Grooving cuts a narrow channel across the work, and parting cuts the finished piece off the end. Both use a narrow insert on a slim holder, and the MGEHR and MGEHER holders in these kits cover the job.
Threading tools
Threading cuts a 60° thread, outside or inside. The kits carry a matched pair: SER for external threads and SNR for internal threads, as the YoShin listing states. The YoShin listing notes that internal threading bars are the piece most kits at this price leave out, so repair and one-off work stays in-house with this set.
Boring tools
Boring cuts inside a bore, so the bar must fit the hole with the insert on. The SCLCR boring bars in these kits reach inside the work, and the bar plus insert must fit the bore before the cut starts.
Shank size and tool posts
Shank size is the measurement that decides whether a holder fits the post. The Joogto and ZiBeiLe kits use a 1/2 inch (12mm) shank. The ZiBeiLe listing states its shank fits most quick-change tool posts and lathe setups. The YoShin kit (on Amazon) uses a 10mm square shank, which suits 7×10 to 8×14 bench lathes and metric quick-change tool posts. The 10mm (0.394 inch) shank is not a drop-in for a standard 3/8 inch (0.375 inch) English opening, so verify the post size before ordering. See the mini lathe vs mini mill guide.
Which kit fits your lathe
Turning, grooving, threading and boring all need a holder and an insert, and the kits below cover those jobs in 12mm and 10mm.
Lathe safety. A lathe spins the work, so keep hands, sleeves and gloves clear of the chuck and the spinning part, wear eye protection, and clamp the work firm. Check the holder sits square in the tool post before the spindle turns. Never reach across a spinning chuck.
FAQ for welders
What lathe tool do I need for turning?
The SCLCR, SDJCR and SDNCN holders in these kits handle turning. Pick the shank that fits the post: the 12mm kits use a 1/2 inch shank, and the 10mm kit suits bench lathes.
What is the difference between grooving and parting?
Grooving cuts a narrow channel across the work, while parting cuts the finished piece off the end. Both use a narrow insert, and the MGEHR and MGEHER holders in these kits cover the job.
Can one kit cut threads inside and outside?
Yes. The kits carry a matched 60° pair: SER for external threads and SNR for internal threads, as the YoShin listing states.
What shank size fits my lathe?
The ZiBeiLe listing states its 1/2 inch (12mm) shank fits most quick-change tool posts. A 10mm shank suits 7×10 to 8×14 bench lathes, but it is not a drop-in for a standard 3/8 inch (0.375 inch) English opening, so verify the post size before ordering.
How many inserts come with each kit?
Each kit holds 14 inserts with 7 holders. The YoShin kit states 2 inserts per holder, with a wrench for every holder.
Related: metal lathe for beginners, mini lathe vs mini mill, best CNC lathe tools, and the metal fab tools guides.




