Best Lathe Cutting Tools (2026): 5 Indexable Kits, Scored
Five indexable lathe tool kits for metal lathes, compared on shank size, holder and insert counts, insert coating, holder material, and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallJoogto 27Pcs 1/2 in9.7/10View on Amazon - 2
5/8 Inch ShankCHAWNIAO 21Pcs 5/8 in9.6/10View on Amazon - 3
Only Stated WarrantyLYMMIYTC 12Pcs 1/2 in9.5/10View on Amazon - 4
Grooving PickASZLBYM MGEHR1616-39.5/10View on Amazon
A part comes off the lathe with a torn finish, a groove that measures wrong, or a thread that will not start, and the tool in the post is usually the reason. The fix is rarely a new lathe; it is the right cutting tool for the cut in front of you. This guide compares the best lathe cutting tools in indexable kits, on what each listing states: shank size, holders, inserts, coating and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Joogto 27Pcs 1/2 in: 9 holders and 18 inserts with standard and reverse blades, a 1/2 inch shank, and CVD-coated inserts for turning, grooving, threading and boring. Check price on Amazon
- 5/8 Inch Shank CHAWNIAO 21Pcs 5/8 in: A 5/8 inch shank with 7 holders and 14 inserts, CVD-coated carbide inserts, and three-layer packaging with anti-rust oil. Check price on Amazon
- Only Stated Warranty LYMMIYTC 12Pcs 1/2 in: The only stated warranty here, 360 days, with 2 holders, 10 round carbide inserts and 2 matched wrenches. Check price on Amazon
- Grooving Pick ASZLBYM MGEHR1616-3: A 16 mm grooving and cut-off holder with 11 MGMN300-M inserts sized for wide, deep grooves. Check price on Amazon
The machines

Indexable Lathe Turning Tool 27Pcs Kit 1/2'' 12mm
A 27-piece indexable kit with 9 holders and 18 inserts, standard and reverse blades, and a 1/2 inch shank for turning, grooving, threading and boring.
Pros
- 9 holders and 18 inserts, the most pieces here
- Standard and reverse blades for tight angles and reverse-side tasks
- Cemented carbide and tungsten steel holders with CVD-coated inserts
- Covers turning, grooving, threading and boring in one kit
Cons
- No warranty term is stated
- No wrenches are stated in the box
- 1/2 inch shank does not fit a 1/4 inch tool post
- Reverse blades help only on tight angles and reverse-side tasks

CHAWNIAO Indexable Lathe Turning Tool 21Pcs Kit
A 21-piece indexable kit with a 5/8 inch shank, 7 holders and 14 inserts, packed in three-layer protection with anti-rust oil.
Pros
- A 5/8 inch shank for larger tool posts
- 7 holders and 14 inserts for turning, grooving, threading and boring
- CVD-coated carbide inserts on carbide and tungsten steel holders
- Three-layer packaging with anti-rust oil, each tool bagged and boxed
Cons
- 5/8 inch shank needs a tool post that takes it
- No warranty term is stated
- No wrenches are stated in the box
- No round inserts for profiling, unlike the LYMMIYTC kit

LYMMIYTC 1/2" 12mm Indexable Lathe Turning Tool
A 12-piece kit with 2 holders, 10 round carbide inserts and 2 matched wrenches, and the only stated warranty here, 360 days.
Pros
- 360 day warranty, the only stated term here
- Round carbide inserts for profiling as well as turning and boring
- 2 matched wrenches included in the box
- Detachable inserts for fast replacement
Cons
- Only 2 holders, the fewest here
- 10 inserts is fewer than the 14 or 18 in the larger kits
- Round inserts only
- 1/2 inch shank does not fit a 1/4 inch tool post

Indexable Lathe Turning Tool 21Pcs Kit 1/4'' 6mm
A 21-piece indexable kit with a 1/4 inch shank, 7 holders and 14 inserts for turning, grooving, threading and boring on small lathes.
Pros
- 1/4 inch shank fits small tool posts
- 7 holders and 14 inserts for turning, grooving, threading and boring
- Cemented carbide and tungsten steel holders with CVD-coated inserts
- Cuts stainless steel, steel and tough alloys
Cons
- 1/4 inch shank is the smallest here
- Fewer inserts than the 27-piece kit
- No reverse blades for tight angles, unlike the 27-piece kit
- No wrenches are stated in the box

ASZLBYM Lathe Grooving Tool Holder Grooving
A grooving and cut-off holder with a 16 mm shank and 11 carbide inserts, sized for wide, deep grooves in pipe and plate.
Pros
- Made for wide, deep grooves and cut-off work
- 11 MGMN300-M inserts with stated size, 2.35 mm thick
- 40Cr steel holder with carbide inserts in hard coated alloys
- Cuts stainless steel, iron, copper and aluminum pipe, and plate
Cons
- Grooving and cut-off only; no turning, threading or boring holders
- A single holder covers grooving only
- 16 mm shank needs a tool post that takes it
- Inserts come in one size, 2.35 mm thick
Other welders and gear to compare
Accusize 1/2 in Shank Indexable Carbide Turning Tool SetCheck price on Amazon
Mini Lathe Machine Multi-Purpose Lathe With ProfessionalCheck price on Amazon
11Pcs Carbide Tip Tipped Cutter Tool Bit Cutting SetCheck price on Amazon
11 Pc 5/16" Carbide Tip Tipped Cutter Tool Bit Cutting SetCheck price on Amazon
Compare the best lathe cutting tools
| Model | Gear Score | Shank | Holders | Inserts | Covers | Material | Warranty |
|---|---|---|---|---|---|---|---|
| Joogto 27Pcs 1/2 in | 9.7/10 | 1/2 in (12 mm) | 9 | 18 | Turning, grooving, threading, boring | Carbide, tungsten steel | Not stated |
| CHAWNIAO 21Pcs 5/8 in | 9.6/10 | 5/8 in (16 mm) | 7 | 14 | Turning, grooving, threading, boring | Carbide, tungsten steel | Not stated |
| LYMMIYTC 12Pcs 1/2 in | 9.5/10 | 1/2 in (12 mm) | 2 | 10 round | Turning, grooving, threading, boring, profiling | 40Cr steel | 360 days |
| Joogto 21Pcs 1/4 in | 9.5/10 | 1/4 in (6 mm) | 7 | 14 | Turning, grooving, threading, boring | Carbide, tungsten steel | Not stated |
| ASZLBYM MGEHR1616-3 | 9.5/10 | 16 mm | 1 | 11 | Grooving, cut-off | 40Cr steel | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 19 November 2026.
Buying guide: what matters in a lathe tool kit
Shank size
Shank size decides whether the holder fits the tool post. The kits here use 1/4 inch, 1/2 inch and 5/8 inch shanks, and the ASZLBYM holder states a 16 mm shank. Measure the tool post opening before you buy, since a shank that does not fit cannot be shimmed into a safe cut.
Holders and inserts
Count both. The 27-piece Joogto kit has 9 holders and 18 inserts, the two 21-piece kits have 7 holders and 14 inserts, and the LYMMIYTC kit has 2 holders and 10 round inserts. The ASZLBYM kit is one grooving holder with 11 inserts. More holders means fewer insert swaps between turning, grooving, threading and boring.
Insert coating and holder material
Every kit here uses carbide inserts with a CVD coating, and the ASZLBYM inserts use hard coated alloys. Holders are cemented carbide and tungsten steel on the Joogto and CHAWNIAO kits, and 40Cr steel on the ASZLBYM and LYMMIYTC holders. Coating and holder steel decide how the edge holds up in stainless steel and tough alloys.
What each kit covers
Four kits cover turning, grooving, threading and boring, and the LYMMIYTC kit adds profiling with its round inserts. The Joogto 27-piece kit adds reverse blades for tight angles and reverse-side tasks. The ASZLBYM kit covers grooving and cut-off only, with inserts made for wide, deep grooves. Match the kit to the cuts the lathe actually makes.
Warranty and support
Only the LYMMIYTC kit states a warranty, 360 days. The Joogto kits state 24 hour service, a 3-month refund and 360-day or 365-day support, and the CHAWNIAO kit states 24 hour service. A support period is not a warranty term.
Use as directed. Wear eye and face protection, clamp the work, keep guards in place, and keep gloves away from rotating parts. Check that each insert seats fully in its holder before the spindle turns, and swap a dull insert for a fresh one instead of forcing the cut. See the OSHA machine guarding guide and our Safety Disclaimer.
Before You Strike an Arc
- Match the shank to the tool post: 1/4, 1/2 or 5/8 inch, or 16 mm on the ASZLBYM holder.
- Count holders and inserts on arrival: 9 with 18, 7 with 14, 2 with 10, or 1 with 11.
- Wipe the anti-rust oil off the holders before the first cut.
- Seat each insert fully in its holder and check the fit before the spindle turns.
FAQ for welders
What lathe tools do I need?
Start with holders for the four cuts a lathe makes most: turning, grooving, threading and boring. The four full kits here cover all four, and the LYMMIYTC kit adds profiling with round inserts. A grooving-only holder like the ASZLBYM suits a shop that already owns the rest.
What do I need to sharpen lathe tools?
These indexable kits do not need sharpening: when an edge goes dull, swap the insert for a fresh one from the kit. The LYMMIYTC holders use a detachable insert design, so replacement is quick. Keep spare inserts on hand in the size each holder takes.
What shank size fits my lathe?
It depends on the tool post opening. The kits here use 1/4 inch, 1/2 inch and 5/8 inch shanks, and the ASZLBYM holder states a 16 mm shank. Measure the opening before ordering, and pick the shank that fits it.
Can one kit cut stainless steel?
Yes. All five kits list stainless steel among the materials they cut, with CVD-coated carbide inserts. The Joogto 21-piece kit and the LYMMIYTC kit also list steel, and the ASZLBYM holder lists iron, copper and aluminum pipe. Match the insert to the material before the cut.
What is the difference between the 21-piece and 27-piece kits?
Count and blades. The 27-piece Joogto kit has 9 holders and 18 inserts, including reverse blades for tight angles and reverse-side tasks. The 21-piece kits have 7 holders and 14 inserts, in 1/4 inch or 5/8 inch shanks. Pick the 27-piece kit when the work needs reverse-side cuts.
Related: types of lathe tools, metal lathe for beginners, CNC lathe setup, parts of a lathe chuck, dial indicator setup, and the metalworking machines hub. Also see our cut off tool lathe. Also see our what is lathe machine. Also see our right hand turning tool. Also see our turning tool holder. Also see our cnc milling vs cnc turning. Also see our carbide vs hss lathe bits.
Scoring, line by line
Each tool is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Lathe cutting tools have no electrical safety listing to state, so every tool here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Joogto 27Pcs 1/2 in | 9.7 | 32 | 21 | 21 | n/a | 0 |
| CHAWNIAO 21Pcs 5/8 in | 9.6 | 30 | 21 | 21 | n/a | 0 |
| LYMMIYTC 12Pcs 1/2 in | 9.5 | 26 | 19 | 19 | n/a | 2 |
| Joogto 21Pcs 1/4 in | 9.5 | 28 | 20 | 20 | n/a | 0 |
| ASZLBYM MGEHR1616-3 | 9.5 | 26 | 19 | 19 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




