Best Turning Tool Holder (2026): 5 Lathe Holders Compared
Five turning tool holders and sets compared on stated tool post fit, tool size, included inserts and warranty terms, from mini lathe sets to BXA and CXA holders.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallAccusize BXA Style 2 Holder9.7/10View on Amazon - 2
Best CXA HolderAccusize CXA Turning Holder9.6/10View on Amazon - 3
Best SetASZLBYM 36PCS Turning Set9.6/10View on Amazon - 4
Best Mini LatheJWGJW Mini Lathe Tool Holder9.6/10View on Amazon - 5
Best ThreadingASZLBYM Threading Holder9.5/10View on Amazon
The chuck is turning, the bar stock is measured and marked, and the cut is waiting on one thing: a holder that puts the tool on center and keeps it there. The best turning tool holder for your lathe is the one that matches your tool post or shank size, your tool bits and the work you do most. We compared five holders and sets by stated fit, tool size, included inserts and warranty terms for lathe work.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
- Best Overall Accusize BXA Style 2 Holder: Style 2 BXA holder for boring, turning and facing Check price on Amazon
- Best CXA Holder Accusize CXA Turning Holder: Steel CXA turning and facing holder for 3/4 in tools Check price on Amazon
- Best Set ASZLBYM 36PCS Turning Set: Three holders with 33 carbide inserts in marked boxes Check price on Amazon
- Best Mini Lathe JWGJW Mini Lathe Tool Holder: Quick replacement holders sized for mini lathes Check price on Amazon
- Best Threading ASZLBYM Threading Holder: Threading holder with ten 16ER AG60 inserts Check price on Amazon
The machines

Accusize BXA Quick Change Tool Post Holder
An ex-large BXA quick change tool post holder in steel, Style 2 for boring, turning and facing with 3/4in tools, with a V-groove for round-shank boring bars.
Pros
- Style 2 boring, turning and facing holder stated
- Made of steel in USA style stated
- Square tool-bit capacity stated from 1/4in to 3/4in
- V-groove support for round-shank boring bars stated
Cons
- Boring bar not included as stated
- No warranty term is stated
- BXA tool post compatibility must be checked as stated
- No inserts stated in the box

Accusize CXA Turning & Facing Holder for 3/4
A CXA turning and facing holder in steel for 3/4 in lathe tool bits, sized for lathes with 13-18 inch swing over bed.
Pros
- CXA turning and facing holder for 3/4 in tools stated
- Made of steel in USA style stated
- For lathes with 13-18 inch swing over bed as stated
- Set-up dimensions stated for A, B, C, D and E
Cons
- No warranty term is stated
- Turning and facing only, with no boring style stated
- No inserts stated in the box
- CXA tool post compatibility must be checked

ASZLBYM 5/8" 36PCS Indexable Carbide Lathe Turning
A 36 piece indexable carbide turning tool set with three 5/8 inch holders and 33 insert blades in storage boxes, for right hand turning on a lathe.
Pros
- Three 5/8 inch turning tool holders stated in the set
- 33 indexable carbide insert blades stated in the set
- Holders made of 40Cr steel as stated
- Inserts stored in 3 plastic boxes with clear marks stated
Cons
- No warranty term is stated
- Right hand cutting direction only as stated
- Holder size is 5/8 x 5/8 inches, so check your tool post fit
- No tool post stated in the set

JWGJW 120034 Tool Post & Lathe Tool Holder & Axa
A quick replacement tool holder set for mini and micro lathes, with turning, boring bar and cut-off blade holders on a dovetail tenon mount.
Pros
- Reset accuracy stated within the range of 0.002mm
- Two 1/2 inch turning and facing holders stated in the pack
- Boring bar holder and cut-off blade holder stated in the pack
- Suitable for 7x10, 7x12, 7x14, 7x16 and 9x16 lathes as stated
Cons
- No warranty term is stated
- Sized for mini, micro and small lathes only as stated
- No inserts stated in the pack
- Mounting bolts and Allen keys needed for set-up as stated

ASZLBYM 5/8" 3/4" Lathe Tool Threading Insert
A right hand threading turning tool holder in 40Cr steel with ten 16ER AG60 carbide inserts and a wrench, for cutting threads on steel parts.
Pros
- Threading holder with 10PCS 16ER AG60 inserts stated
- Holder material stated as 40Cr steel
- Machining pitch range stated at 0.5 to 3.0mm
- T15 wrench stated in the package
Cons
- No warranty term is stated
- Threading holder only, with no general turning inserts stated
- Right hand cutting direction only as stated
- Single holder in the package as stated
Other welders and gear to compare
Accusize Industrial Tools BXA Turning and Facing HolderCheck price on Amazon
Accusize Industrial Tools Axa Turning and Facing HolderCheck price on Amazon
3/4" Indexable Lathe Turning Tool Holder MVJNR2020K16 SteelCheck price on Amazon
Lathe Turning Holders Threading Tools Bit-Set 21pcsCheck price on Amazon
RupXinSplend Lathe Turning Tools Threading HolderCheck price on Amazon
Spec sheet comparison
| Holder | Weld Score | Tool post or shank | Tool size | Inserts included | Warranty |
|---|---|---|---|---|---|
| Accusize BXA Style 2 Holder | 9.7/10 | BXA quick change | 3/4in | Not stated | Not stated |
| Accusize CXA Turning Holder | 9.6/10 | CXA quick change | 3/4 in | Not stated | Not stated |
| ASZLBYM 36PCS Turning Set | 9.6/10 | 5/8 x 5/8 inch shank | 5/8 inch | 33 carbide inserts | Not stated |
| JWGJW Mini Lathe Tool Holder | 9.6/10 | Dovetail tenon mount | 1/2 inch holders | Not stated | Not stated |
| ASZLBYM Threading Holder | 9.5/10 | 16x16mm shank | 16ER AG60 inserts | 10 threading inserts | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 20 November 2026.
How to choose the best turning tool holder
Match the holder to your tool post
Quick change holders must match the tool post size. The Accusize BXA Style 2 holder fits compatible BXA quick-change tool posts, and the Accusize CXA holder is a CXA quick change tool post holder for lathes with 13-18 inch swing over bed. The ASZLBYM sets are shank holders instead, at 5/8 x 5/8 inches and 16x16mm, so measure your tool post or holder block before ordering. Our types of lathe tools guide explains the main holder styles.
Check tool size and capacity
Both Accusize holders take 3/4in or 3/4 in tools. The BXA Style 2 holder states square tool-bit capacity from 1/4in to 3/4in and a round boring-bar shank of 1/2in, so it covers square bits and round boring bars in one holder. The JWGJW set states two 1/2 inch turning and facing holders, sized for mini lathes such as 7×10 and 9×16 models. See our best lathe cutting tools roundup for insert kits in the same sizes.
Decide whether you need inserts included
Two picks arrive with inserts. The ASZLBYM 36PCS set states 33 indexable carbide insert blades across three holders, stored in marked plastic boxes. The ASZLBYM threading holder states 10PCS 16ER AG60 threading inserts with a machining pitch range of 0.5 to 3.0mm for steel parts. The Accusize holders and the JWGJW set state no inserts, so budget for tool bits or inserts separately if you choose them.
Read the fit notes before you buy
Each maker states a fit limit worth respecting. The BXA holder maker advises checking the holder interface, tool capacity and available center height before use. The ASZLBYM sets state right hand cutting direction, so left hand work needs a different set. The JWGJW set is stated for DIY mini lathes, micro lathes and small lathes, not for larger swing machines. Our metal lathe for beginners guide covers sizing a first lathe setup.
FAQ for welders
What is the difference between BXA and CXA holders?
They fit different quick change tool post sizes. The Accusize BXA holder is for compatible BXA tool posts, while the Accusize CXA holder is sized for lathes with 13-18 inch swing over bed. Match the holder to the tool post already on your lathe.
Which pick includes inserts?
The ASZLBYM 36PCS set states 33 carbide insert blades with three holders, and the ASZLBYM threading holder states 10PCS 16ER AG60 threading inserts. The other three picks state no inserts in the box.
Which holder fits a mini lathe?
The JWGJW set is stated for small lathes and micro lathes such as 7×10, 7×12, 7×14, 7×16 and 9×16 models, with a dovetail tenon mount and 1/2 inch turning holders.
Do any of these holders state a warranty?
No. None of the five makers states a warranty term here, so each pick scores zero on the warranty line and the choice rests on fit, tool size and included tooling.
Scoring, line by line
Each holder is scored on performance, build, value, safety listing and warranty, with the weights published on our How we pick page. For a turning tool holder, performance means the stated fit, tool capacity and included tooling; none of the five makers states a safety listing or a warranty term here, so each scores zero on those lines.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Accusize BXA Style 2 Holder | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Accusize CXA Turning Holder | 9.6 | 30 | 21 | 21 | n/a | 0 |
| ASZLBYM 36PCS Turning Set | 9.6 | 29 | 20 | 22 | n/a | 0 |
| JWGJW Mini Lathe Tool Holder | 9.6 | 28 | 19 | 21 | n/a | 0 |
| ASZLBYM Threading Holder | 9.5 | 27 | 19 | 20 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.
More welding guides
See every Lathes and Mills guide and all Metalworking Machines guides.
More picks: best lathe cutting tools, best right hand turning tool, types of lathe tools.




