Bench Grinder Machine Parts: Names and Replacement Options
A bench grinder is a small set of parts: a grinding wheel, a wire wheel, an arbor and a bushing, and this guide names each one and shows replacement options for 6 inch machines.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
OSFTBVT 6in Wire Wheel Brush for Bench Grinder9.6/10View on Amazon - 2
6" Bench Grinder Wheel 60 Grit & Wire Wheel Brush9.6/10View on Amazon - 3
6" Wire Wheel for Bench Grinder, Fine Brush Wheel9.6/10View on Amazon - 4
DeWalt Accessories DW4904 6" Crimp Wire Whl Brush9.5/10View on Amazon
A dull drill bit, a bolt crusted with rust and a blade that needs an edge all point at the same bench. The parts that fix those jobs sit on the grinder itself, and knowing their names keeps a parts order short. Bench grinder machine parts are the pieces on that machine: the grinding wheel, the wire wheel, the arbor they mount on and the bushing that adapts the bore to the shaft.
This guide links to product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.

OSFTBVT 6in Wire Wheel Brush for Bench Grinder
A 2-pack of 6 inch crimped carbon steel wire wheels with 0.012 inch wire and 1/2 and 5/8 inch arbor fit for rust and paint removal.
Pros
- 6 inch crimped carbon steel wire wheel with 0.012 inch wire for rust, burrs and paint
- Pack of 2 wheels in one box
- Arbor bushing converts a 5/8 inch arbor to 1/2 inch
- Balanced to cut vibration, per the listing
Cons
- No warranty term is stated
- 5/8 inch arbor hole comes without a washer, per the listing
- No stated item weight

6" Bench Grinder Wheel 60 Grit & Wire Wheel Brush
A 6 inch set that pairs a 60 grit green silicon carbide grinding wheel with a fine crimped wire brush, both on a 1/2 inch arbor.
Pros
- 60 grit green silicon carbide wheel for sharpening drill bits, blades and knives
- Wire brush included for light burrs and paint
- 1/2 inch arbor fits most 6 inch bench grinder machines, per the listing
- Two tools in one set for grinding and cleaning
Cons
- No warranty term is stated
- 1/2 inch arbor only, no 5/8 inch bushing stated
- Single 60 grit wheel, no finer grit in the set
- Wire brush width not stated

6" Wire Wheel for Bench Grinder, Fine Brush Wheel
A 6 inch fine wire wheel with 0.012 inch brass-coated carbon steel wire and a bushing that adapts a 5/8 inch arbor to 1/2 inch.
Pros
- 0.012 inch brass-coated carbon steel wire for rust and paint removal
- Bushing adapts a 5/8 inch opening to 1/2 inch
- Balanced for minimal vibration, per the listing
- Bristles stay intact and do not scatter easily, per the listing
Cons
- No warranty term is stated
- Single wheel in the pack
- Plastic bushing only, no steel bushing stated
- No stated maximum speed

DeWalt Accessories DW4904 6" Crimp Wire Whl Brush
A 6 inch crimped wire wheel brush from DEWALT with an internal holding plate and wire that is 100 percent inspected, per the listing.
Pros
- Internal holding plate for wire consistency and safety, per the listing
- Wire is 100 percent inspected, per the listing
- Built for even balance and smooth performance, per the listing
- Part number DW4904 stated in the listing
Cons
- No wire diameter stated
- No arbor size stated
- No warranty term is stated
- Single wheel, no spare in the pack
Bench Grinder Machine Parts: What Wears Out
The grinding wheel does the cutting and sharpening. The wire wheel does the cleaning, stripping rust, paint and burrs from metal rather than grinding a fresh edge. The arbor is the shaft the wheels mount on, and the bushing is the ring that adapts a wheel bore to a smaller shaft. Guards, tool rests and eye shields sit around those parts, and the listings here cover the wheels that wear out and get replaced, and the bushings that come with two of them.
The Grinding Wheel
A grinding wheel is specified by grit among other ratings, and the set here carries a 60 grit green silicon carbide wheel. The listing states it suits high precision edges and names drill bits, blades and knives, plus aluminum, copper, titanium, carbide and stainless steel. Silicon carbide is the hard abrasive in that wheel, and 60 grit is a medium grit for shaping an edge before a finer finish.
The Wire Wheel
A wire wheel is a brush that mounts like a grinding wheel and cleans rather than grinds. Crimped carbon steel wire is the common fill. The OSFTBVT and ZORUNNA wheels use 0.012 inch wire for rust, paint and burrs, with a fine 0.008 inch wire in the POLIWELL set for light burrs and paint. Brass-coated wire, as on the ZORUNNA wheel, cleans softer metals with less risk of scratches, per the listing. Balance matters here: a wheel that runs out of balance shakes the grinder, and the listings for the OSFTBVT and ZORUNNA wheels state balanced construction.
Arbor Size and Bushings
Arbor size is the fit that decides whether a wheel mounts at all. Arbor sizes in the listings are 1/2 inch and 5/8 inch, and two of the wheels include a bushing that adapts a 5/8 inch opening to a 1/2 inch shaft. Check arbor fit before ordering: the DEWALT listing states no arbor size, so check the part number against the grinder manual before ordering. A bushing that fits loose is a sign to stop and match the parts before mounting. The OSFTBVT listing notes its 1/2 inch hole takes a washer, which is how that wheel is made to fit.
Replacement Parts for Your Bench Grinder
The wheels below are the replacement parts for the jobs above: wire wheels for rust and paint cleaning, and a grinding wheel plus wire brush set for edges and light cleaning. Match the wheel size and arbor to your grinder before ordering.
Side by Side
| Gear Score | Wheel size | Wire | Arbor | |
|---|---|---|---|---|
| OSFTBVT 6 Inch Wire Wheel 2-Pack | 9.6/10 | 6 in | 0.012 in crimped steel | 1/2 and 5/8 in |
| POLIWELL 60 Grit Wheel and Wire Brush | 9.6/10 | 6 in | 0.008 in crimped wire | 1/2 in |
| ZORUNNA 6 Inch Fine Wire Wheel | 9.6/10 | 6 in | 0.012 in brass-coated steel | 1/2 and 5/8 in |
| DEWALT DW4904 6 Inch Wire Wheel | 9.5/10 | 6 in | Not stated | Not stated |
FAQ for welders
What size wire wheel fits a 6 inch bench grinder?
A 6 inch wheel, with an arbor that matches the grinder shaft. The wheels here are 6 inch, and the OSFTBVT and ZORUNNA wheels list 1/2 inch and 5/8 inch arbor fit with a bushing. Check the arbor size in the listing before ordering, since the DEWALT listing states no arbor size.
What is the difference between 0.012 inch wire and 0.008 inch wire?
The 0.012 inch wire is the coarser crimped wire in the wheels here, listed for rust, paint and burr removal. The 0.008 inch wire is the fine crimped wire in the POLIWELL set, listed for light burrs and paint. Pick the coarser wire for heavy cleaning and the finer wire where the surface needs a lighter touch.
Can a wire wheel and a grinding wheel share a bench grinder?
Yes, that is what the POLIWELL set is built for: a 60 grit silicon carbide wheel and a wire brush, both 6 inch with a 1/2 inch arbor. Mount each wheel on its own arbor and match the arbor size before ordering. The wire brush then handles cleaning while the grinding wheel handles edges.
How do I match a replacement wheel to my grinder?
Match the wheel diameter, the arbor size and the wire or grit to the job. The wheels here are 6 inch; arbors are 1/2 inch, with 5/8 inch also listed on two of them, and a bushing adapts a 5/8 inch opening to 1/2 inch where the listing includes one. Where a listing states no arbor size, check the part number against the grinder manual before ordering.
Related: best bench grinder, bench grinder vs bench buffer, best bench grinder wheel dresser, and the metal fab tools hub. Also see angle grinder parts.




