Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Machine Vise vs Bench Vise: Which One Should You Buy?

The findmall 3-inch and 4-inch machine vises and the VEVOR 6-inch bench vise compared on jaw width, opening, clamping force, swivel base and what each listing leaves unclear.

Machine Vise vs Bench Vise: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR 6 Inch Heavy Duty Milling Vise Bench ClampVEVOR 6 Inch Heavy Duty Milling Vise Bench Clamp9.7/10View on Amazon
  2. 2findmall 4 Inch Lock Down Vise Accuracy Millingfindmall 4 Inch Lock Down Vise Accuracy Milling9.6/10View on Amazon
  3. 3findmall 3 Inch Accuracy CNC Mill Vise Withoutfindmall 3 Inch Accuracy CNC Mill Vise Without9.6/10View on Amazon

Verdict. Machine vise vs bench vise comes down to the mount and the stated figures. Pick the machine vise side if you want stated jaw width and opening figures for accuracy work on a mill or machining center. Pick the bench vise side if you want a bench vise with a swiveling base and a stated clamping force figure.

A machine vise holds work on a milling machine, and a bench vise holds work at the bench, but the listings here blur that line: the VEVOR bench vise also names milling and drilling work. This comparison puts both findmall machine vises against the VEVOR bench vise on what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The vises

VEVOR 6 Inch Heavy Duty Milling Vise Bench Clamp

VEVOR 6 Inch Heavy Duty Milling Vise Bench Clamp

VEVOR9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-inch bench vise with a 360-degree swiveling base, 29 KN clamping force and a 66.58 lb iron body.

Pros

  • 6-inch jaw width for wide workpieces
  • 360-degree swiveling base for flexible positioning
  • 29 KN maximum clamping force
  • High-strength screw rod with a universal handle for smooth rotation

Cons

  • 66.58 lb, heavy to move around the shop
  • No jaw opening figure is stated
  • No jaw height figure is stated
  • No warranty term is stated
findmall 4 Inch Lock Down Vise Accuracy Milling

findmall 4 Inch Lock Down Vise Accuracy Milling

findmall9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-inch lock down machine vise with a 4.56-inch jaw opening, 19 KN clamping force and a flame-hardened bed for milling, drilling and accuracy work.

Pros

  • 4.56-inch jaw opening for wide workpieces
  • 19 KN maximum clamping force
  • Ductile iron rated 80000 pounds per square inch for minimum bending
  • Flame-hardened sliding surface for durability

Cons

  • Sold without a base
  • No swivel base is stated
  • No handle is stated for clamping
  • No warranty term is stated
findmall 3 Inch Accuracy CNC Mill Vise Without

findmall 3 Inch Accuracy CNC Mill Vise Without

findmall9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-inch accuracy CNC mill vise with a 3.19-inch jaw width, dual through-bolts and a hemispherical pressure structure for milling, shaping and drilling.

Pros

  • Jaw width of 3.19 inches with a 3.03-inch opening
  • Dual through-bolts spread lateral force during clamping
  • Hemispherical pressure structure presses down at a 45-degree angle
  • Ergonomic rotary handle for clamping force and angle

Cons

  • Sold without a base
  • No clamping force figure is stated
  • No swivel base is stated
  • 3.19-inch jaw width fits smaller workpieces than the 6-inch VEVOR

Machine vise vs bench vise side by side

VEVOR 6 Inch findmall 4 Inch findmall 3 Inch
Gear Score 61 59 58
Side Bench vise Machine vise Machine vise
Jaw width 6 in 100 mm 3.19 in
Jaw opening Not stated 4.56 in 3.03 in
Jaw height Not stated 1-1/4 in 0.94 in
Clamping force 29 KN 19 KN Not stated
Swivel base 360 degrees Not stated Not stated
Weight 66.58 lb Not stated Not stated
Size 18.0 x 13.0 x 8.0 in Not stated 9.84 in long, 4.69 in wide
Warranty Not stated Not stated Not stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 November 2026. No listing here states a warranty term or a safety certification.

Jaw width and opening

The VEVOR states a 6-inch jaw width. The findmall 3-inch states a jaw width up to 3.19 inches with a maximum opening of 3.03 inches, and the 4-inch states a jaw width of 100 mm with a jaw opening of 4.56 inches. The VEVOR states no opening figure, so the opening comparison stops at both machine vises.

Clamping force

The VEVOR states a maximum clamping force of 29 KN, and the findmall 4-inch states 19 KN. The findmall 3-inch states no clamping force figure, so the force comparison covers the VEVOR and the findmall 4-inch only. The 3-inch vise presses down at a 45-degree angle through a hemispherical pressure structure, and the 4-inch body is ductile iron rated 80000 pounds per square inch.

Swivel base and mounting

The VEVOR is the only pick here with a swivel base, turning 360 degrees. Both findmall vises are sold without a base. The 3-inch listing credits its solid base design with stability during high-speed machining, and its rotary handle adjusts clamping force and angle.

Weight and build

The VEVOR weighs 66.58 lb, with dimensions of 18.0 by 13.0 by 8.0 inches. The findmall 3-inch gives an overall length of 9.84 inches, a width of 4.69 inches and a body height of 2.6 inches.

Machine work vs bench work

The findmall vises name milling, shaping, drilling and machining centers. The VEVOR names milling, drilling and precision parts finishing, plus assembly jobs. The work lists overlap, so the choice turns on the mount.

Choose the machine vise side if

  • You clamp work on a mill or machining center.
  • You want stated jaw width and opening figures for accuracy work.
  • You want a stated clamping force figure, as on the 4-inch at 19 KN.
  • You want a vise sold without a base.

Choose the bench vise side if

  • You want a bench vise with a 360-degree swiveling base.
  • You want a 6-inch jaw width for wide workpieces.
  • You want a stated 29 KN clamping force.
  • You work at the bench on fitting, assembly and drilling jobs.

Before You Strike an Arc

  • Check the jaw width and opening against the workpiece before you order.
  • Check that the vise mounts to your table or bench: both findmall vises ship without a base.
  • Check the swivel base on the VEVOR before you clamp work with it.
  • Check the clamping force figure: 29 KN on the VEVOR and 19 KN on the findmall 4-inch.

FAQ for welders

Which vise should I buy for a milling machine?

The machine vise side, on the stated figures. The 3-inch names conventional milling machines, CNC milling machines and machining centers, and the 4-inch names milling and drilling machines. The VEVOR listing also names milling and drilling, so the choice turns on the mount and the stated figures. The 3-inch states a 3.19-inch jaw width with a 3.03-inch opening, and the 4-inch states a 4.56-inch opening with 19 KN.

What is the difference between a machine vise and a bench vise?

In this comparison, the difference is the mount and the stated figures. Both findmall vises are sold without a base, and the VEVOR has a 360-degree swiveling base. The work lists overlap: the VEVOR listing also names milling and drilling, and the 3-inch listing also names sawing, filing and chiseling.

How much clamping force do these vises state?

The VEVOR states 29 KN and the findmall 4-inch states 19 KN. The findmall 3-inch states no clamping force figure, so compare the stated figures only.

Do any of these vises state a warranty?

No. None of the listings here states a warranty term, so check the warranty with the seller before you order.

Related: bench vise types, bench vise size, best bench vise for home use, and cast iron vs forged steel bench vise.

Scoring, line by line

All of the vises here are scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. No listing here states a safety certification or a warranty term, so no safety or warranty points were given. The VEVOR scores highest on jaw width, clamping force and swivel base.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
VEVOR 6 Inch 9.7 30 22 21 n/a 0
findmall 4 Inch 9.6 29 21 21 n/a 0
findmall 3 Inch 9.6 29 21 20 n/a 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides

Welding Tables and Carts ·

Bench Vise Parts: Names and What Each Does

Bench vise parts are the jaws, screw, handle, slide and base that hold work still, and this guide names each one and shows how…

Welding Tables and Carts ·

Best Cross Slide Bench Vise (2026)

Five cross slide vises for drill presses and mills, compared on jaw width, travel, build and the warranty each listing states.