Craftsman CMEG100 Review: Pros, Cons & Who It’s For
Craftsman CMEG100 review: a corded 4-1/2 inch angle grinder with 6 amps, 12,000 RPM, a tool-free guard and a 3-year warranty, with the listing's quirks flagged.

On this page
The Craftsman CMEG100 is a corded 4-1/2 inch angle grinder with a 6 amp motor spinning 12,000 RPM, aimed at grinding, weld cleanup and general metal work. This craftsman cmeg100 review works through what the listing states, what the specs mean in the shop, and where the listing leaves gaps. We have not used this grinder; the review is based on the manufacturer’s listing on Amazon, collected 19 October 2026.
As an Amazon Associate I earn from qualifying purchases. WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The grinder

CRAFTSMAN CMEG100 4-1/2 in Small Angle Grinder
Corded 4-1/2 inch angle grinder with a 6 amp motor, 12,000 RPM, tool-free guard and a 3-year limited warranty.
Pros
- 6 amp motor at 12,000 RPM on 120 volts
- Tool-free guard and spindle lock for fast changes
- 3-position side handle plus contoured overmolded grip
- 3-year limited warranty stated
Cons
- No load speed, duty cycle or noise figures stated
- Ships with a grinding wheel, no cutting wheel
- VERSATRACK hook and accessories sold separately
Craftsman CMEG100 review: the short verdict
The CMEG100 reads as a straightforward corded shop grinder: 6 amps and 12,000 RPM on a 4-1/2 inch wheel, a tool-free guard, a spindle lock for wheel changes and a 3-position handle, all at 4.6 pounds. The listing states a 3-year limited warranty. The gaps: no load speed or duty figures, a confused power-source row in the spec table, and the VERSATRACK hook sold separately.
Key specs
| Spec | Craftsman CMEG100 | Spec | Craftsman CMEG100 |
|---|---|---|---|
| Model number | CMEG100 | Disc size | 4-1/2 in |
| Motor | 6 amp | Speed | 12,000 RPM |
| Voltage | 120 volts, corded | Guard | Tool-free |
| Handle | 3-position | Spindle lock | For quick wheel changes |
| Size | 12.27 x 4.43 x 3.45 in | Weight | 4.6 lb |
| In the box | Handle, wrench, grinder, guard, grinding wheel | Warranty | 3-year limited |
What the CMEG100 does well
6 amps and 12,000 RPM for a 4-1/2 inch wheel
The headline numbers are 6 amps and 12,000 RPM on 120 volts, driving a 4-1/2 inch wheel. That is the standard formula for a small corded grinder: enough speed for grinding welds, deburring and cutting with the right wheel, on 120 volts. It weighs 4.6 pounds and measures 12.27 inches long.
Tool-free guard and spindle lock
Two features cut downtime. The tool-free guard adjusts without a wrench, and the spindle lock holds the spindle for quick wheel changes. Both are the kind of small conveniences that matter when you swap between grinding and cutting wheels several times in a session. The listing also notes a contoured overmolded handle for added comfort during use.
A handle that moves three ways
The side handle mounts in three positions, which lets you set up for right-hand, left-hand or top-down work and keeps control in tight spots. The box includes the 3-position handle, a wrench, the grinder, a grinding guard and a grinding wheel, so it is ready to grind out of the box. Note it ships with a grinding wheel, not a cutting wheel.
Grinding vs cutting: using the right wheel
The box ships a grinding wheel and a grinding guard, which sets the CMEG100 up for its first job: grinding welds, deburring edges and smoothing metal. Cutting needs a cutting wheel, which is not in the box, so buy cutting wheels separately along with any guard the wheel type calls for. Every wheel you mount, grinding or cutting, must be a 4-1/2 inch wheel rated for 12,000 RPM or higher, the grinder’s maximum speed. The spindle lock makes the swap fast and the tool-free guard repositions in seconds, which is exactly the workflow for a session that alternates between grinding a weld flat and cutting stock to length.
What 6 amps and 12,000 RPM mean in the shop
Six amps on 120 volts is the standard corded formula for a 4-1/2 inch grinder: continuous full power with no battery to fade, which suits long sessions of weld cleanup. The tradeoff is the cord, so plan the work near an outlet. At 4.6 pounds and 12.27 inches long with a contoured overmolded handle, the 3-position handle allows for control in different applications. The listing states no load speed or duty cycle, so treat sustained heavy grinding with respect: let the tool do the work, keep the vents clear, and give it cool-down time on long jobs rather than leaning on it continuously.
VERSATRACK storage and shop setup
The CMEG100 is compatible with the VERSATRACK wall organization system, but the hook and accessories are sold separately, so factor that in if you want it off the bench. At 4.6 pounds and 12.27 by 4.43 by 3.45 inches, it hangs easily on a single hook and stores in a drawer or toolbox without fuss. Keep the wrench with the grinder, since wheel changes need it even though the guard itself is tool-free, and store spare wheels flat and dry so they stay true.
Reading the listing’s quirks before you buy
Two rows in the spec table deserve a second look. The power-source row reads “electric, gas, Corded Electric,” which is confused; the title and bullets both say corded, so buy it as a corded 120-volt tool and ignore the stray “gas.” The warranty row states a 3-year limited warranty and points to the “Warranty & Support” section for full details, so read that section before you need it, not after. The listing also leaves blanks: no load speed, no duty cycle, no noise figure. None of those are deal-breakers in the 6-amp class, but they mean the listing will not tell you how it behaves under continuous load.
Limitations
The spec table has a confused power-source row reading “electric, gas, Corded Electric”. The title and bullets say corded, so treat it as corded electric and ignore the stray “gas”. Beyond that, the listing states no load speed, no duty cycle and no noise figure, so continuous heavy grinding is unrated. The VERSATRACK compatibility is real but the hook and accessories are sold separately. Corded power means no battery to charge, but it also means you are tethered to an outlet, which matters on larger fabrication jobs.
How we scored it
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Craftsman CMEG100 | 9.6 | 28 | 20 | 20 | 5 | 4 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.
The CMEG100 scores on solid stated specs for the class and the 3-year limited warranty, with the safety score carried by the tool-free guard and spindle lock. The full method is on our How We Pick page.
Who should buy the Craftsman CMEG100, and who should skip it
Buy it if
- You want a corded 4-1/2 inch grinder for weld cleanup, deburring and cutting with the right wheel.
- You value quick guard moves and fast wheel changes in a busy session.
- A 3-year limited warranty matters to you.
- You already work near 120-volt outlets and do not need cordless freedom.
Skip it if
- You need cordless reach away from outlets: this is corded only.
- You want stated load or duty figures: the listing gives none.
- You need a cutting wheel in the box: only a grinding wheel ships with it.
- You want the VERSATRACK hook included: it is sold separately.
Before the first cut
Fit the guard before the wheel, set the handle in the position that gives you the most control, and check that any wheel you mount is rated for 12,000 RPM or higher. Wear eye protection, gloves and hearing protection, keep the guard between you and the wheel, and unplug the grinder before changing wheels.
Alternatives
For cordless options, see our best cordless angle grinder picks. For the full corded field, the best angle grinder roundup compares more models side by side.
FAQ for welders
What size discs does the Craftsman CMEG100 take?
4-1/2 inch wheels. The listing ships it with a grinding guard and a grinding wheel in that size.
Is the CMEG100 corded or cordless?
Corded. The title and bullets say corded electric on 120 volts; ignore the spec table’s confused “electric, gas” power-source row.
What warranty does the CMEG100 have?
A 3-year limited warranty, per the listing, with full details in the listing’s warranty and support section.
Does it come with a cutting wheel?
No. The box includes a grinding wheel, a grinding guard, the 3-position handle and a wrench. Buy cutting wheels separately.
What is the VERSATRACK compatibility?
The grinder works with the VERSATRACK wall organization system, but the hook and accessories are sold separately.
How much does the CMEG100 weigh?
4.6 pounds, per the listing, at 12.27 by 4.43 by 3.45 inches. Light enough for extended work with the side handle fitted.
Related: the best angle grinder roundup, cordless picks and the metal fab tools hub.




