Safety Clean Parts Washers: How to Clean Parts Safely in the Shop
A parts washer strips grease off gears, bearings and carburetors, and the safe way to run one comes down to size, solvent and the lid.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
3.5 Gallon Capacity Portable Steel Cabinet Parts9.5/10View on Amazon - 2
Portable Parts Washer Cart 20-Gallon Tank Solvent9.5/10View on Amazon
A gear pulled from a transmission comes out black with old grease, and a carburetor body hides grit in every passage. A brush and a can of cleaner take all afternoon and leave the grime half on. Safety clean parts washers answer that job: a pump moves solvent over the part in a basin and the part soaks clean. This guide covers how to pick the size, which solvent limits to respect, and how the two washers below handle the job.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

3.5 Gallon Capacity Portable Steel Cabinet Parts
A bench top steel cabinet washer with a 3.5 gallon reservoir and a 110V pump that recycles liquid at 1/2 gallon per minute, sized for wheel bearings, gears, and carburetors.
Pros
- Hinged, fusible link lid closes when not in use
- 3.5 gallon reservoir with a 110V pump at 1/2 gallon per minute
- Work basin measures 18 in wide by 13.5 in deep by 9 in high
- 1 year limited manufacturer warranty
Cons
- 3.5 gallon reservoir suits small parts only
- Pump moves 1/2 gallon per minute, below the 317 gph of the JEGS cart
- Not for use with flammable or combustible solvents such as mineral spirits
- Biodegradable cleaners are also listed as not for use

Portable Parts Washer Cart 20-Gallon Tank Solvent
A 20-gallon tank cart with a 12-gallon solvent capacity and a 317 gph pump, with a drying shelf, a removable pan, and a storage shelf.
Pros
- 20-gallon tank with a 12-gallon solvent capacity
- Pump output of 317 gph
- Drying shelf with drain and a removable pan
- Storage shelf built into the cart
Cons
- 30 day warranty is the shortest term in this guide
- 80.0 lb weight makes it the heavier unit to move
- 38.0 by 21.5 by 37.0 inch size needs dedicated floor space
- No fusible link lid is stated for this cart
How safety clean parts washers work
A parts washer is a basin with a pump. The pump draws fluid from the reservoir and pushes it over the part, and the fluid drains back to be used again. The JEGS cart (on Amazon) states a pump output of 317 gph, while the bench top washer states a pump that recycles liquid at 1/2 gallon per minute. The part sits in the basin while the fluid strips grease and grit. The bench top washer has a hinged, fusible link lid that closes when not in use.
Pick the washer size first
Size decides what fits in the basin. The bench top washer has a 3.5 gallon fluid reservoir and a work basin that measures 18 in wide by 13.5 in deep by 9 in high, and the maker names wheel bearings, gears, and carburetors as the jobs it suits. The JEGS cart has a 20-gallon tank with a 12-gallon solvent capacity, which holds more fluid. The maker calls the bench top unit lightweight and easy to move, while the JEGS cart weighs 80.0 lb and measures 38.0 in by 21.5 in by 37.0 in. For a bigger tank and more fluid, see the large parts washer guide. When grime is caked on thick, a high pressure parts washer is the other route. More shop cleaning gear sits in the metal fab tools section.
Solvent and fire safety
Solvent choice is the safety decision in this guide. The bench top washer is not for use with flammable or combustible solvents such as mineral spirits and biodegradable cleaners. The JEGS cart states a 12-gallon solvent capacity and does not name a solvent, so follow the guidance that comes with the cart. Keep the lid closed on the bench top washer when it is idle: it has a hinged, fusible link lid that closes when not in use and helps prevent accidental fire. Work with ventilation and keep flammables away from the bench. Chemical-resistant gloves help here; see the parts washer gloves guide.
The two washers side by side
| Product | Tank capacity | Pump output | Power | Warranty | Gear Score |
|---|---|---|---|---|---|
| 3.5 Gallon Steel Cabinet Parts Washer | 3.5 gallon fluid reservoir | 1/2 gallon per minute | 110V | 1 year limited manufacturer warranty | 9.5/10 |
| JEGS Portable Parts Washer Cart | 20-gallon tank, 12-gallon solvent capacity | 317 gph | 110/120V | 30 days | 9.5/10 |
The table shows the split: the cart holds more fluid and pushes it faster, while the bench top unit carries the lid safety feature and the longer warranty.
The washers for this guide
Both washers below handle a step in the same job: the bench top unit cleans small parts like wheel bearings, gears, and carburetors, while the cart holds more fluid with its 20-gallon tank.
FAQ for welders
What solvent goes in a parts washer?
Use the solvent the washer maker names for that model. The bench top washer rules out flammable or combustible solvents such as mineral spirits and biodegradable cleaners. The JEGS cart states a 12-gallon solvent capacity and does not name a solvent, so follow the guidance that comes with the cart before filling it.
Can I use mineral spirits in these washers?
Not in the bench top washer: the listing states it is not for use with flammable or combustible solvents such as mineral spirits. The JEGS cart does not name a solvent in its listing, so do not assume mineral spirits suits it. Check the guidance that comes with the cart first.
Do I need to keep the lid closed on a parts washer?
On the bench top washer, yes, when the washer is idle. The bench top washer has a hinged, fusible link lid that closes when not in use and helps prevent accidental fire. The JEGS cart lists no lid in its listing.
What size parts washer do I need?
Match the basin to the largest part you clean. The bench top washer has a 3.5 gallon reservoir and a basin that measures 18 in wide by 13.5 in deep by 9 in high, which suits wheel bearings, gears, and carburetors. The JEGS cart has a 20-gallon tank with a 12-gallon solvent capacity.
Do these washers need an outlet?
Yes. The JEGS cart runs on 110/120V power, and the bench top washer has a 110V electric pump. Both need mains power at the bench, so plan the outlet before placing the washer.
Related: how to use a parts washer, parts washer cleaner, parts washer gloves, and the metal fab tools hub.




