Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Weld Size Gauge: How to Measure Fillet Welds

A weld size gauge reads the leg and throat of a fillet weld, and this guide shows how to match the blade to the weld and pick a stainless set that covers the sizes on the bench.

Weld Size Gauge: How to Measure Fillet Welds
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ZeeDix Metal Fillet Weld Gauge SetZeeDix Metal Fillet Weld Gauge Set9.5/10View on Amazon
  2. 2VASTOOLS Fillet Weld Gauge,Stainless SteelVASTOOLS Fillet Weld Gauge,Stainless Steel9.5/10View on Amazon
  3. 3CZMOONSEE Stainless Steel MG-11 7 Piece FilletCZMOONSEE Stainless Steel MG-11 7 Piece Fillet9.4/10View on Amazon
  4. 4RIVERWELD 7 Piece Fillet Weld Set Gage MG-11 RlRIVERWELD 7 Piece Fillet Weld Set Gage MG-11 Rl9.3/10View on Amazon

A weld size gauge measures a fillet weld by matching a blade to the weld face, reading the leg and the throat straight off the steel. The gauge is a set of blades, each cut to a size, and the blade that sits flush against the weld tells the welder the size of that joint. This guide shows how to read those blades and how to pick a set that covers the sizes on the bench.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

ZeeDix Metal Fillet Weld Gauge Set

ZeeDix Metal Fillet Weld Gauge Set

ZeeDix9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-piece stainless steel fillet weld gauge set with a laser scale, measuring 1/8 inch to 1 inch, with blades about 4.01 inches long and 1.26 inches wide.

Pros

  • Seven blades cover 1/8 inch to 1 inch in inch and metric
  • Laser scale is clear and easy to read
  • Stainless steel blades are sturdy and not easy to deform
  • Gauge is about 4.01 inches long and 1.26 inches wide, compact to carry

Cons

  • No storage case is stated
  • Seven blades share one bolt and nut, tightened to fix the set for storage
  • Range stops at 1 inch, so larger fillets need another gauge
  • Made for fillet legs and throats only
VASTOOLS Fillet Weld Gauge,Stainless Steel

VASTOOLS Fillet Weld Gauge,Stainless Steel

VASTOOLS9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-blade stainless steel fillet weld gauge set covering 1/8 inch to 1 inch, 3.2 to 25.4 mm, with laser etched markings and a pocket case.

Pros

  • Seven blades cover 1/8 inch to 1 inch, 3.2 to 25.4 mm
  • Laser etched markings stay clear and easy to read
  • Blades are deburred for fine, smooth edges
  • Checks concave or convex fillet welds

Cons

  • No warranty term is stated
  • Range stops at 1 inch, so larger fillets need another gauge
  • Seven blades in one pocket case, so a lost blade leaves a gap in the range
  • The set measures fillet welds only
CZMOONSEE Stainless Steel MG-11 7 Piece Fillet

CZMOONSEE Stainless Steel MG-11 7 Piece Fillet

CZMOONSEE9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-piece stainless steel MG-11 fillet weld gauge set with metric sizes from 3 to 25 mm, accuracy of ±0.5 mm, a leather case and a paper manual.

Pros

  • Seven blades cover 1/8 inch to 1 inch, with metric sizes from 3 to 25 mm
  • Accuracy of ±0.5 mm is stated
  • Thickened stainless steel with oversized nuts
  • Leather case and paper manual are included

Cons

  • Range stops at 1 inch, so larger fillets need another gauge
  • Leather case and paper manual are the only extras stated
  • Convex type is named, so concave welds are not its stated use
  • Seven blades share one set of nuts, so the set must be kept together
RIVERWELD 7 Piece Fillet Weld Set Gage MG-11 Rl

RIVERWELD 7 Piece Fillet Weld Set Gage MG-11 Rl

RIVERWELD9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-piece stainless steel fillet weld gauge set with markings on both sides in metric and inch for checking fillet leg and throat size.

Pros

  • Seven blades check fillet leg and throat sizes
  • Markings on both sides in metric and inch
  • Theoretical throat marks are included
  • Stainless steel construction

Cons

  • No warranty term is stated
  • No storage case is stated
  • Seven blades on one set, so a lost blade leaves a gap in the range
  • The set covers fillet leg and throat only

What a weld size gauge measures

A fillet weld joins pieces of metal at an angle, and its size is read from the leg, the throat and the shape of the face. The leg runs along each piece from the corner, the throat runs from the corner to the face, and the gauge blade matches the leg or the throat to give the size. The VASTOOLS set is made for inspection of concave or convex fillet welds, and the blades carry inch and metric scales so the same set reads both ways.

Side by side

ZeeDix 7-Piece RIVERWELD MG-11 VASTOOLS MG-11 CZMOONSEE MG-11
Pieces 7 7 7 blades 7
Measuring range 1/8 to 1 inch Not stated 1/8 to 1 inch 1/8 to 1 inch
Metric sizes 3.2 to 25.4 mm Not stated 3.2 to 25.4 mm 3 to 25 mm
Material Stainless steel Stainless steel Stainless steel Stainless steel
Markings Laser scale Both sides Laser etched Laser engraving
Case Not stated Not stated Pocket case Leather case
Accuracy Not stated Not stated Not stated ±0.5 mm

The sets here share the same shape, seven stainless blades in inch and metric, and differ in what they state: range, markings, case and accuracy. The ZeeDix set states the most, down to gauge size, while the RIVERWELD set states the least, with no range given.

How to read a fillet weld gauge

Start with the leg: set the blade against the weld face so its edge follows the leg, and read the size where the blade sits flush. Then check the throat the same way, using the throat marks where the set has them. A blade that rocks or leaves a gap is the wrong size; the blade that sits flat is the size of the weld. Read the scale in the units the job calls for, since the sets here carry inch and metric on the same blades.

Weld size gauge sets for the bench

Each set below handles the same job, reading fillet leg and throat, and differs in range, markings and what comes with it.

Which set fits the bench

The ZeeDix set leads the ranking on the detail its maker states, from gauge size to the full size list. The VASTOOLS set follows close behind with etched markings and a pocket case, the CZMOONSEE set adds a stated accuracy figure and a leather case, and the RIVERWELD set trails on the range it leaves unstated. Let the weld cool before you measure it, and wear safety glasses under the helmet when you work around the weld.

FAQ for welders

What does a weld size gauge measure?

It measures the leg and throat of a fillet weld. Each blade matches a size, and the blade that sits flush against the weld face gives the size of that joint. Sets here cover fillet legs and throats in inch and metric.

How do you measure a fillet weld leg?

Set the blade against the weld face so its edge follows the leg, and read the size where the blade sits flush. A blade that rocks or leaves a gap is the wrong size. The sets here carry inch and metric scales, so the same blade reads both ways.

What is the difference between fillet leg and throat?

The leg runs along the metal from the corner of the joint, and the throat is the shortest distance from the corner to the face of the weld. A gauge set checks both: the blades here are made to check fillet legs and fillet throats, and the RIVERWELD set adds theoretical throat marks.

Do weld size gauges read in metric and inch?

Yes. The sets here carry inch and metric scales on the same blades, from 1/8 inch to 1 inch and 3.2 to 25.4 mm on the sets that state a range. The CZMOONSEE set states metric sizes from 3 to 25 mm and accuracy of ±0.5 mm.

Can a weld size gauge check concave and convex welds?

The VASTOOLS set is made for inspection of concave or convex fillet welds. The CZMOONSEE set names the convex type. Match the blade type to the weld face.

Related: sheet metal gauge thickness tool, metal scribe, and the metal fab tools hub.

More buying guides