Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Dewalt DWS780 Review: Pros, Cons and Who It Suits

Review of the DEWALT DWS780 12-inch double bevel miter saw: 15-amp motor, XPS shadow light, dust collection, and the listing contradictions to check.

Dewalt DWS780 Review: Pros, Cons and Who It Suits
On this page

The double bevel saw

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more

DEWALT 12-inch Double Bevel Miter Saw (DWS780)

DEWALT 12-inch Double Bevel Miter Saw (DWS780)

DEWALT9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-amp 12-inch double bevel miter saw with XPS shadow light alignment and over-75% dust collection, reviewed from its listing.

Pros

  • 15-amp motor at 3800 rpm
  • XPS LED shadow light for cut alignment
  • Double bevel for compound cuts
  • Dust collection over 75% per the listing

Cons

  • Warranty type Limited with no term stated
  • 24.8 kg: heavy to move between sites
  • Corded only, no battery option stated

DEWALT DWS780 review: the short verdict

The DEWALT DWS780 is a 12-inch double bevel miter saw with a 15-amp motor and the XPS LED shadow light system for cut alignment. We have not used this saw ourselves; this review is based on the Amazon listing and the specs published there. The short verdict: a full-featured double bevel saw with a genuinely useful cut-line system, but the listing contradicts itself on wattage, dimensions and blade material, so read the specs section before buying.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Key specs

Spec Stated value Where stated Note
Model number DWS780 (DWS780-QS in spec table) Title and spec table Suffix differs
Motor 15 Amp, 3800 rpm Bullets 1100W (bullets); 1675W (spec table)
Blade 12 in, 80-tooth carbide Title and box contents Spec table says stainless steel
Bevel Double bevel Title –
Cut line XPS LED shadow light Bullets –
Dust collection Over 75% captured Bullets Maker claim
Weight 24.8 kg Spec table –
Dimensions 32.57 x 23 x 19.5 in Spec table Bullets say 35x45x25 cm
In the box Saw, blade, wrench, clamp, dust bag Spec table –
Warranty Limited, no term stated Spec table No period given

All specs here repeat what the maker rates and the listing prints, copied down 19 October 2026. Three entries contradict each other, detailed under Limitations.

A double bevel miter saw tilts both left and right, so compound cuts do not require flipping the workpiece. The DWS780 pairs that with a 15-amp motor spinning 3800 rpm per the bullets, driving a 12-inch, 80-tooth carbide blade that is included in the box along with a blade wrench, a vertical material clamp and a dust bag. At 24.8 kg and 32.57 by 23 by 19.5 inches per the spec table, it is a full-size shop saw, not a portable trim saw.

The XPS LED shadow light system is the headline feature: it projects a shadow of the blade onto the workpiece for cut-line alignment, with no adjustment needed per the listing. The integrated cutline blade positioning system backs that up for accuracy and visibility. The dust collection system claims to capture over 75% of generated dust, which matters when the saw lives in a garage shop. The spindle lock and bevel capability round out the feature set.

The 80-tooth blade suits fine crosscuts and trim work out of the box; framers will swap to a coarser blade. The vertical material clamp holds stock against the fence for safer cuts, and the included dust bag catches what the port does not.

What the DWS780 does well

Cut alignment. The XPS shadow line is the rare gadget that earns its keep: a shadow of the actual blade on the wood, no lasers to calibrate. The listing calls it adjustment-free.

Power. 15 amps at 3800 rpm is full-size miter saw power for heavy-duty applications per the listing. The listing describes the motor as designed for heavy-duty applications.

Double bevel. Bevels both ways for compound miters without flipping the board, the defining advantage over single-bevel saws.

Dust collection. Over 75% capture per the listing is a strong claim for a miter saw, most of which spray dust everywhere.

In the box. Blade, wrench, vertical clamp and dust bag are all included. Nothing essential is missing on day one.

Limitations

Listing contradictions. The bullets say 1100 watts while the spec table says 1675 watts; the bullets give dimensions of 35 by 45 by 25 cm while the spec table says 32.57 by 23 by 19.5 inches (not a unit conversion, the numbers do not match); and the spec table says Blade Material Stainless Steel while the included blade is described as carbide. We trust the bullets over the spec table, but the listing needs cleanup.

Weight. 24.8 kg is heavy for a saw that moves between job sites. This is a shop saw that stays put.

No stated warranty term. The warranty type is Limited with no period, and the manufacturer warranty description adds nothing. For a flagship saw, that is a gap.

Corded only. Corded electric on 110 volts per the spec table. No battery option is stated.

How we scored it

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
DEWALT DWS780 9.5 32 22 21 0 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.

The Gear Score weighs performance, build, value, safety and warranty from the listing figures. The DWS780 scores on the 15-amp motor, the XPS alignment system and the complete box contents; it loses points for the three listing contradictions and the unstated warranty term. How we pick explains the weights.

Who should buy the DEWALT DWS780, and who should skip it

Buy it if you do trim and framing and want a 12-inch double bevel saw with a genuinely useful cut-line system and strong dust collection. The 80-tooth blade and the clamp make it ready for finish work out of the box. Skip it if you need a stated warranty term, if you carry the saw to job sites daily at 24.8 kg, or if you want cordless.

What the 80-tooth blade means for your work

The included 80-tooth carbide blade is a fine-cutting blade: more teeth mean a smoother cut in trim and plywood, at the cost of slower cutting in framing lumber. The listing pairs it with a blade wrench, so swapping blades is part of the design. If your work is mostly framing, budget for a coarse framing blade; if it is trim and finish, the included 80-tooth blade is ready. The vertical material clamp holds stock against the fence, which matters most with a fine-tooth blade where a wandering board burns the cut.

Double bevel in practice

Double bevel means the head tilts both left and right, so a compound miter on the far end of a board does not require flipping the stock. On a 12-inch double bevel saw like the DWS780, that saves real time on crown molding and trim runs. The bevel capability is listed without a degree figure in the data shown, so confirm the bevel range with the seller if you cut steep crowns. Single-bevel saws do the same work, but every opposite-hand cut means flipping and re-registering the board.

Dust collection reality

The listing claims over 75% dust capture, which is strong for a miter saw. In practice, the included dust bag catches the coarser dust while fine dust still escapes; connecting the dust port to a shop vacuum improves on the bag. For a garage shop, where the saw shares air with cars and storage, the capture figure is worth more than it looks. The claim is the maker’s, not a measured figure, so treat it as a design target.

Before the first cut

  • Confirm the wattage with the seller: the listing says 1100 watts in the bullets and 1675 in the spec table.
  • Check the actual footprint: the two stated dimension sets do not match, so measure the bench space against the seller’s figures.
  • Ask the seller for the warranty period in writing, since the listing states the type but no term.
  • Verify the blade material: carbide per the box contents, stainless steel per the spec table.

Alternatives

If the contradictions put you off, other 12-inch double bevel saws from the big brands offer similar capacity with cleaner listings. For metal cutting rather than wood, see our portable band saw vs chop saw comparison: the DWS780 is a woodworking saw.

FAQ for welders

What is the motor wattage of the DWS780?

The bullets say 1100 watts and the spec table says 1675 watts. We trust the bullets; confirm with the seller.

How does the XPS shadow line work?

Per the listing, an LED projects the blade’s shadow onto the workpiece for cut alignment, with no adjustment needed.

What is included in the box?

The listing includes a 12-inch 80-tooth carbide blade, the miter saw, a blade wrench, a vertical material clamp and a dust bag.

Does it have a warranty?

The listing states the warranty type as Limited but gives no period. Ask the seller for the term.

How heavy is it?

The spec table lists 24.8 kg. It is a full-size saw, not a portable one.

More buying guides