Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Cut Off Wheel for Exhaust Pipe (2026)

Five cut-off wheels for exhaust pipe compared on size, thickness, RPM rating and count.

Best Cut Off Wheel for Exhaust Pipe (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VOISEN 4.5 in 100-PackBest OverallVOISEN 4.5 in 100-Pack9.6/10View on Amazon
  2. 2S SATC 6 in 25-PackBest 6 in ValueS SATC 6 in 25-Pack9.6/10View on Amazon
  3. 3DEWALT 9 in WheelBest Big WheelDEWALT 9 in Wheel9.5/10View on Amazon
  4. 4Sbestily Diamond 2 inBest Small WorkSbestily Diamond 2 in9.5/10View on Amazon

The exhaust pipe is rusted through at the bend, and the new section needs a clean square cut before it goes up. A thin cut-off wheel on the angle grinder is the tool for that cut, and the best cut off wheel for exhaust pipe is the one whose size, thickness and RPM rating match your grinder and the pipe.

A figure from one listing describes that listing only. Wheel listings contradict themselves on thickness more than you would expect, and we flag that in the reviews.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall VOISEN 4.5 in 100-Pack: 4.5 in wheels rated 13,300 RPM with double mesh, 100-pack for the shop. Check price on Amazon
  • Best 6 in Value S SATC 6 in 25-Pack: 6 in wheels for angle grinders, 25-pack with stated ANSI safety compliance. Check price on Amazon
  • Best Big Wheel DEWALT 9 in Wheel: 9 in wheel for cutoff saws, 6600 RPM max, aluminum oxide. Check price on Amazon
  • Best Small Work Sbestily Diamond 2 in: 2 in diamond wheel with mandrel for tight spots and stainless. Check price on Amazon

The machines

VOISEN 4 1/2 Cut Off Wheel,100 PCS Angle Grinder

VOISEN 4 1/2 Cut Off Wheel,100 PCS Angle Grinder

VOISEN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100-pack of 4.5 in cut-off wheels rated to 13,300 RPM with double fiberglass mesh, for 4.5 in angle grinders.

Pros

  • 13,300 RPM rating with 80 m/s stated
  • Double fiberglass mesh reinforcement
  • 100 wheels, the largest count here
  • Aluminum oxide for steel and stainless

Cons

  • Title says 1/21 in thick, not a standard thickness; the table says 0.1 in
  • No warranty term stated
  • 100 wheels to store
  • Thin on brand background
S SATC Cutting Wheel 6 in 6" x.045 x7/8" Cut Off

S SATC Cutting Wheel 6 in 6" x.045 x7/8" Cut Off

S SATC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 25-pack of 6 in cut-off wheels, .045 in thick per the title, with stated ANSI safety compliance for angle grinders.

Pros

  • 6 in size suits exhaust pipe on angle grinders
  • 25 wheels per pack
  • States ANSI safety requirements
  • Lists steel pipe and stainless among uses

Cons

  • Three thickness figures: .045 in title, 0.040 in bullets, 0.05 in table
  • No RPM rating stated
  • No warranty term stated
  • Aluminum oxide only, no diamond option
DEWALT - 9 x 5/64 in. x 7/8 T1 Flexvolt Cutoff

DEWALT - 9 x 5/64 in. x 7/8 T1 Flexvolt Cutoff

DEWALT9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9 in aluminum oxide cut-off wheel, 5/64 in thick, rated 6,600 RPM for the DEWALT XR FLEXVOLT cutoff saw.

Pros

  • 9 in wheel for cutoff saws
  • 6,600 RPM rating stated
  • Aluminum oxide, 60 grit
  • Fits the DCS690 and similar tools

Cons

  • Single wheel, not a pack
  • Needs a cutoff saw, not a grinder
  • No warranty term stated
  • Thinnest listing here, few stated specs
Sbestily Metal Diamond Cutting Wheel 2Inch

Sbestily Metal Diamond Cutting Wheel 2Inch

Sbestily9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 2 in diamond cut-off wheels with a 1/4 in mandrel, 0.04 in thick, rated to 20,000 RPM max.

Pros

  • Diamond grain for stainless and mixed metals
  • 1/4 in mandrel included
  • 0.04 in ultra-thin
  • 20,000 RPM max rating

Cons

  • No warranty term stated
  • 2 in wheel is small for exhaust pipe
  • Listing says to avoid running at the max speed
  • 2-pack only
Dremel EZ456B 1-1/2" EZ Lock Rotary Tool Cutting

Dremel EZ456B 1-1/2" EZ Lock Rotary Tool Cutting

Dremel9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-pack of 1.5 in fiberglass-reinforced cut-off wheels, .045 in thick, with EZ Lock for fast changes on Dremel tools.

Pros

  • EZ Lock for fast accessory changes
  • Fiberglass reinforced, stated 2X longer than the 426
  • 12 wheels per pack
  • Good for sheet metal and small pipe

Cons

  • 1.5 in wheel is small for exhaust pipe
  • Needs the EZ402 mandrel, not included
  • Warranty reads as labeled, no term
  • No RPM rating stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Size Thickness Count Max RPM
VOISEN 4.5 in 100-Pack 9.6/10 4.5 x 7/8 in 0.1 in (table) 100 13300
S SATC 6 in 25-Pack 9.6/10 6 x 7/8 in .045 in (title) 25 Not stated
DEWALT 9 in Wheel 9.5/10 9 x 7/8 in 5/64 in 1 6600
Sbestily Diamond 2 in 9.5/10 2 in, 1/4 in mandrel 0.04 in 2 20000
Dremel EZ456B 12-Pack 9.5/10 1.5 in .045 in 12 Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 20 October 2026. Where a listing contradicts itself, the table follows the title and bullets.

Buying guide: best cut off wheel for exhaust pipe

Wheel size

Wheels here run 1.5 to 9 in. A 4.5 or 6 in wheel on an angle grinder is the usual exhaust-pipe setup; the 9 in DEWALT fits a cutoff saw; the 1.5 and 2 in wheels are for tight spots. Match the wheel to the grinder, not the pipe.

Thickness

Thin wheels cut faster with less heat: the S SATC and Dremel list .045 in, the Sbestily 0.04 in, the DEWALT 5/64 in. The VOISEN title says 1/21 in, which is not a standard thickness; its spec table says 0.1 in.

RPM rating

Never spin a wheel faster than its rating. The VOISEN lists 13,300 RPM, the DEWALT 6,600 RPM and the Sbestily 20,000 RPM max. The S SATC and Dremel listings state no RPM figure, so check the wheel itself before mounting.

Abrasive

Aluminum oxide is the standard here for steel exhaust pipe. The Sbestily uses diamond grain and lists stainless, bronze and brass among its uses, which suits mixed-metal work.

Use as directed. A cut-off wheel is only safe at or below its rated speed: check the max RPM against your grinder before mounting, use the right flanges, and wear eye and face protection. The S SATC listing says to wear all applicable safety gear, which is good advice for every wheel here.

[wgl_safety kind=”tool”]

Before You Strike an Arc

  • Check the wheel’s max RPM against your grinder’s no-load speed; three listings state a rating, two do not.
  • Match the arbor: 7/8 in for the 4.5 and 6 in wheels, the EZ402 mandrel for the Dremel, and the 1/4 in mandrel that comes with the Sbestily.
  • Inspect each wheel for cracks before mounting; the listings do not state a shelf life.
  • Only the S SATC listing mentions ANSI safety requirements; none of the five states a warranty term.

FAQ for welders

Can I cut exhaust pipe with an angle grinder?

Yes, with a thin cut-off wheel: the 4.5 and 6 in wheels here fit standard angle grinders. Mark the cut, keep the wheel square to the pipe, and let the wheel do the work instead of forcing it.

What size cut-off wheel for exhaust pipe?

A 4.5 in wheel is the common pick, and the VOISEN 100-pack is sized for 4.5 in grinders. A 6 in wheel like the S SATC gives more reach. The 9 in DEWALT needs a cutoff saw, not a grinder.

Do I need a special wheel for stainless exhaust?

The Sbestily diamond wheel lists stainless among its uses, and the S SATC lists stainless steel. Standard aluminum oxide wheels also cut stainless; the listings do not claim a stainless-only requirement.

How do I know the wheel fits my grinder?

Match the arbor: the 4.5 and 6 in wheels use 7/8 in arbors, the standard for those grinders. The Dremel needs the EZ402 mandrel, and the Sbestily includes a 1/4 in mandrel. Never force a wheel onto the wrong arbor.

Can a cut-off wheel explode?

Any wheel can fail if abused. The Sbestily listing says its wheel will not explode or fall apart, a maker claim. Check the max RPM, mount with the right flanges, and wear eye and face protection.

Related: best angle grinder for cutting metal, cut off tool vs angle grinder, best angle grinder for welding prep and the metal fab tools hub.

Scoring, line by line

Each wheel is scored on performance, build, value, safety and warranty, using only what its listing publishes. The weights are on our How We Pick page. No listing here states a safety certification or a warranty term, so those criteria score zero across the board and the ranking comes from the other three.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
VOISEN 4.5 in 100-Pack 9.6 29 20 22 n/a 0
S SATC 6 in 25-Pack 9.6 29 19 21 n/a 0
DEWALT 9 in Wheel 9.5 28 21 18 n/a 0
Sbestily Diamond 2 in 9.5 27 20 19 n/a 0
Dremel EZ456B 12-Pack 9.5 26 20 19 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides