Arbor Press Uses: Pressing, Bearings and Shop Jobs
Arbor press uses range from pressing and stamping to bending, stretching, forming, riveting, cutting and carving small parts in the home shop.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
VEVOR Arbor Press, 3 Ton Manual Arbor Press9.6/10View on Amazon - 2
VEVOR Arbor Press, 1 Ton Manual Arbor Press9.6/10View on Amazon
An arbor press uses a lever and a rack to push a ram down with steady, controlled force, and that simple motion covers a surprising range of shop jobs. Arbor press uses include pressing, stamping, bending, stretching and forming small parts, plus riveting, cutting and carving. This guide walks through the common jobs, shows how to use an arbor press, and compares the presses below.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

VEVOR Arbor Press, 3 Ton Manual Arbor Press
A 3 ton cast iron arbor press with a 12.2 inch stroke, three molds, and a 6.5 inch four-hole anvil plate.
Pros
- 3 ton working pressure with a 12.2 inch maximum stroke
- Three molds included: flat drift, pointed drift and round drift
- 0.5 inch ram bore takes multiple molds for riveting, cutting and carving
- 6.5 inch four-hole steel anvil plate fixes items of different shapes
Cons
- No warranty term is stated in the listing
- Item weight of 85.98 pounds makes it a bench fixture rather than a portable tool
- No handwheel is stated for ram height adjustment
- At 18.1 x 9.5 x 22.1 inches it needs a dedicated bench spot

VEVOR Arbor Press, 1 Ton Manual Arbor Press
A 1 ton cast iron arbor press with a handwheel for ram height, a 5.9 inch stroke, three molds, and a 3.5 inch four-hole anvil plate.
Pros
- Handwheel adjusts ram height smoothly before the lever does the work
- Three molds included: flat drift, pointed drift and round drift
- 0.4 inch ram bore takes multiple molds for riveting, cutting and carving
- 3.5 inch four-hole steel anvil plate fixes items of different shapes
Cons
- Warranty field reads not_applicable, so no warranty term is stated
- 1 ton capacity and 5.9 inch stroke suit smaller work only
- Item weight of 26.01 pounds still needs a steady bench
- At 9.5 x 8.3 x 11.4 inches the working area is compact
Arbor press uses in one paragraph
An arbor press suits jobs where a part needs steady pressure in a straight line rather than a hammer blow. Pressing fits parts together and seats them, stamping marks leather, aluminum and small metal parts, and bending and forming shape sheet and small stock. Stretching and forming work the material slowly, while riveting, cutting and carving use the molds. Every job below shares one need: the work sits on the anvil plate, the ram comes down straight, and the lever gives the force.
Side by side
| Capacity | Max stroke | Ram bore | Anvil plate | |
|---|---|---|---|---|
| VEVOR 3 Ton Arbor Press | 3 Ton | 12.2 inch / 310 mm | 0.5 inch | 6.5 inch, four-hole steel |
| VEVOR 1 Ton Arbor Press with Handwheel | 1 Ton | 5.9 inch / 150 mm | 0.4 inch | 3.5 inch, four-hole steel |
The 3 ton press gives the longer stroke and larger anvil plate, while the 1 ton press adds the handwheel. Both presses share the same three molds and cast iron build, with four-hole anvil plates in different sizes. Pick by the size of the work and the stroke it needs.
When the 3 ton press is the better choice
- Larger parts. The 12.2 inch stroke and 6.5 inch anvil plate suit work the smaller press cannot take.
- Heavier pressing. A 3 ton working pressure covers jobs that need more force.
- Larger ram bore. The 0.5 inch ram bore is wider than the 0.4 inch bore on the 1 ton press.
- A fixed bench spot. At 85.98 pounds it stays put once it is set up.
See the best drift punch set guide for hand tools that pair with press work.
When the 1 ton press is the better choice
- Small, careful work. Stamping leather, aluminum and jewelry suits the 5.9 inch stroke.
- Ram height control. The handwheel sets ram height before the lever does the pressing.
- A compact bench. At 9.5 x 8.3 x 11.4 inches it fits a crowded bench.
- Lighter handling. At 26.01 pounds it moves around the shop more easily.
How to use an arbor press
Set the work on the anvil plate, fix it with the four holes, then fit the mold the job needs into the ram bore. On the 1 ton press, turn the handwheel to bring the ram near the work. Pull the lever smoothly so the ram comes down straight, then lift the lever to raise it. Keep hands clear of the ram path and the anvil plate, and check the work before pressing again.
What do you use an arbor press for
Pressing bearings into place is a core press job, and the same push seats pins and rivets. Stamping marks leather, aluminum and jewelry, while bending, stretching and forming shape small parts. The molds open up riveting, cutting and carving, and the four-hole anvil plate holds items of different shapes steady while you work.
More arbor press uses and shop tool guides live in the metal fab tools hub.
The gear for these jobs
The presses below cover the jobs above: the 3 ton press for larger parts, the 1 ton for small work.
Can one press do both jobs?
Yes, within its limits: either press stamps, bends, stretches, forms, rivets, cuts and carves, since both share the same molds and build. The difference is capacity and stroke: a press too small for the work runs out of stroke or force first. Match the press to the largest job you plan to run, and see the best bench vise under 100 guide for holding work while you press.
Press safety. Keep hands clear of the ram and the anvil plate, fix the work before you pull the lever, and lock the lever when the press is not in use. Wear safety glasses when stamping or cutting.
For more options, see our metal fab tools guides.
FAQ for welders
What can you press with an arbor press?
An arbor press handles pressing, stamping, bending, stretching and forming on small parts, plus riveting, cutting and carving. It suits leather, aluminum, jewelry and handicraft work.
Can an arbor press press bearings?
Yes, pressing bearings into place is a core arbor press use, since the ram comes down straight and the lever gives steady, controlled force. Seat the bearing square on the anvil plate and press steadily so it stays straight.
Can an arbor press stamp leather?
Yes, stamping leather is one of the uses the listings name, along with aluminum, jewelry and handicraft production. Fit the mold the job needs, fix the leather on the anvil plate, and pull the lever smoothly.
What is the difference between the 1 ton and 3 ton arbor press?
The 3 ton press gives a 12.2 inch stroke, a 0.5 inch ram bore and a 6.5 inch anvil plate; the 1 ton press gives a 5.9 inch stroke, a 0.4 inch ram bore and a 3.5 inch anvil plate. The 1 ton press adds a handwheel for ram height. Pick by the size of the work and the stroke it needs.
What molds come with an arbor press?
Both presses come with three molds: flat drift, pointed drift and round drift. The molds fit the ram bore and enable basic deformation and extrusion work.
Related: best drift punch set, best punch set for steel, best bench vise under 100, and the metal fab tools hub.




