Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Hydraulic Knockout Punch Set (2026): 5 Kits, Compared

Five hydraulic knockout punch sets for punching round holes in sheet metal, compared on punching capacity, die range, stated thickness capacity and warranty.

Best Hydraulic Knockout Punch Set (2026): 5 Kits, Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1TEMCo TH0037Best OverallTEMCo TH00379.6/10View on Amazon
  2. 2TEMCo TH0004Best Compact KitTEMCo TH00049.6/10View on Amazon
  3. 3VEVOR SYK-15-10Widest Kit InclusionsVEVOR SYK-15-109.5/10View on Amazon
  4. 4VEVOR TPA-15Laser Marked DiesVEVOR TPA-159.5/10View on Amazon

A steel sheet on the fab bench needs a clean round hole in the right spot, without the ragged edge a hole saw can leave. This guide compares five options for the best hydraulic knockout punch set, each scored on what its Amazon listing states: punching capacity, die range, stated thickness capacity and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall TEMCo TH0037: True 13 US ton capacity, 10 dies from 1/2 to 4 in, and a stated 5 year warranty. Check price on Amazon
  • Best Compact Kit TEMCo TH0004: 9 US ton, 6 dies from 1/2 to 2 in, laser marked dies, stated 5 year warranty. Check price on Amazon
  • Widest Kit Inclusions VEVOR SYK-15-10: 15 ton, 10 dies, step drill bit, 2 draw studs and sealing rings included. Check price on Amazon
  • Laser Marked Dies VEVOR TPA-15: 15 ton, 10 dies with dual inch-millimeter laser scales, plus a step drill. Check price on Amazon

The machines

TEMCo TH0037 4" Hydraulic Knockout Punch

TEMCo TH0037 4" Hydraulic Knockout Punch

TEMCo Industrial9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The biggest stated capacity here, a true 13 US ton hydraulic punch with 10 dies from 1/2 to 4 inches, slug-splitting dies to 2 inches, deep draw dies above that, and the only stated 5 year warranty in its class.

Pros

  • Stated true 13 US ton capacity, the highest stated here
  • 10 dies cover 1/2 to 4 inch hole sizes
  • Slug-splitting dies to 2 inches, deep draw dies above that
  • Stated 5 year warranty, the only one at this size

Cons

  • 26.38 kg stated weight, the heaviest here
  • Dies above 2 inches need roomy workpieces to seat and draw
  • GREENLEE tooling compatibility is claimed, not detailed
  • Stainless capacity is limited to 1/16 inch
TEMCo Hydraulic Knockout Punch TH0004

TEMCo Hydraulic Knockout Punch TH0004

TEMCo Industrial9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A stated 9 US ton hydraulic punch with 6 dies from 1/2 to 2 inches, laser engraved alignment marks, and a stated 5 year warranty in a 24 lb kit.

Pros

  • Stated 5 year warranty, matching the larger kit
  • Laser engraved alignment marks on every die
  • Rated for brass, copper, aluminum, fiberglass and plastic, per bullets
  • 24 lb stated weight, the lightest here

Cons

  • 6 dies stop at 2 inches; nothing above that
  • 9 US ton is the lowest stated capacity here
  • Stainless capacity is limited to 1/16 inch
  • No storage case is detailed in the listing
VEVOR 15 T Hydraulic Knockout Punch Kit 1/2" to 4"

VEVOR 15 T Hydraulic Knockout Punch Kit 1/2" to 4"

VEVOR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A stated 15 ton hydraulic kit with 10 punches and dies from 1/2 to 4 inches, a step drill bit, 2 draw studs and sealing rings, in 40 Cr and 45# steel.

Pros

  • Stated 15 ton hydraulic capacity, the joint highest here
  • Step drill bit, 2 draw studs and sealing rings included
  • 40 Cr steel and 45# steel construction, per title
  • On/off knob on the pump for quick pressure release

Cons

  • No warranty term is stated
  • The listing spends words on handle comfort rather than die specs
  • The case measures 21.6 x 11.8 x 6.7 in, a large footprint
  • No draw stud thread standard is stated
VEVOR Knockout Punch Set

VEVOR Knockout Punch Set

VEVOR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A stated 15 ton hydraulic set with 10 dies from 1/2 to 4 inches, laser scale markings in dual inch-millimeter units, a step drill and a portable storage case.

Pros

  • Laser scale markings in dual inch-millimeter units
  • 10 dies from 1/2 to 4 in, stated as 22.5 to 115.4 mm
  • Heavy-duty alloy steel with corrosion-resistant black coating
  • Ergonomic non-slip curved handle, per bullets

Cons

  • No warranty term is stated
  • Die tolerances are not stated
Hydraulic Knockout Punch Kit 15 Ton 1/2-4 Inch 10

Hydraulic Knockout Punch Kit 15 Ton 1/2-4 Inch 10

AMZCNC9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A stated 15 US ton hydraulic punch kit with 10 die sets from 1/2 to 4 inches, 3/4-16 thread compatibility, and a long plastic handle.

Pros

  • Stated 15 US ton punching capacity
  • 10 die sets cover 1/2 to 4 inch hole sizes
  • Compatible with GREENLEE and other domestic punch tooling, 3/4-16 threads
  • Fits draw stud size 7/16-20UN, per spec table

Cons

  • No warranty term is stated
  • The bullets list is short for a 10-die kit

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Punching capacity Die range Thickness capacity Item weight Warranty
TEMCo TH0037 9.6/10 13 US ton 1/2 to 4 in (10 dies) 1/8 in steel, 1/16 in stainless 26.38 kg 5 years
TEMCo TH0004 9.6/10 9 US ton 1/2 to 2 in (6 dies) 1/8 in steel, 1/16 in stainless 24 lb 5 years
VEVOR SYK-15-10 9.5/10 15 ton 1/2 to 4 in (10 dies) 0.1 in soft steel, 0.08 in stainless 38 lb Not stated
VEVOR TPA-15 9.5/10 15 ton 1/2 to 4 in (10 dies) 1/8 in steel, 1/16 in stainless 35 lb Not stated
AMZCNC SYK-green 9.4/10 15 US ton 1/2 to 4 in (10 dies) 1/8 in steel, 1/16 in stainless 20.07 kg Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 22 October 2026.

How to choose the best hydraulic knockout punch set

Punching capacity

Capacity is the tonnage the pump states. The TEMCo TH0004 states 9 US true ton, the TEMCo TH0037 states true 13 US ton, and the two VEVOR kits and the AMZCNC state 15 ton. More tonnage means the pump can draw larger dies through thicker metal, but only the stated tonnage counts. None of these listings states a measured force at a specific die size, so treat the numbers as the maker’s rating. The TH0037’s deep draw dies above 2-1/2 inches pair with its higher stated tonnage, which matches the larger hole sizes it covers.

Die range

Four of the five kits ship 10 dies covering hole sizes from 1/2 to 4 inches, which covers the hole sizes these tools are made for. The TEMCo TH0004 ships 6 dies from 1/2 to 2 inches, which suits shop work that never needs larger holes. The TH0037 splits its die design: slug-splitting dies from 1/2 to 2 inches for easy slug removal, and deep draw dies from 2-1/2 to 4 inches with an optimized cutter face angle that the listing says needs less force. The VEVOR SYK-15-10 states its dies in 40 Cr and 45# steel, and the VEVOR TPA-15 lists heavy-duty alloy steel with a corrosion-resistant black coating.

Stated thickness capacity

Four listings state 1/8 inch steel capacity with 1/16 inch stainless capacity, and the VEVOR SYK-15-10 states 0.1 inch for soft carbon steel plate with 0.08 inch for stainless steel plate. Check your sheet thickness against those numbers before you buy. Each listing names the materials its dies are rated for, so confirm your sheet metal, brass, copper, aluminum, fiberglass or plastic, is on that list before you punch.

Warranty and what it covers

Two listings state a warranty: the TEMCo TH0004 and the TH0037 both state a 5 year warranty, and both score on that criterion. The other three list no warranty term, so they score zero on warranty. A stated term matters on a tool with hydraulic seals, many loose dies and draw studs that see hard use in the shop.

Before You Strike an Arc

  • Match the draw stud thread to your dies: the TEMCo kits and the AMZCNC state 3/4-16 threads, and the TH0037 adds 3/8-23.
  • Keep the step drill bit with the kit; the two VEVOR kits include one for the pilot hole.
  • Check the die count on arrival: 6 dies in the TH0004, 10 in the other four kits.
  • Confirm your sheet metal is on the listing’s supported materials list before punching stainless or fiberglass.
  • Release the pressure after the cut, clear the slug, and check the hole edge before moving to the next one.

FAQ for welders

What is a knockout punch?

A knockout punch is a tool that punches a round hole in sheet metal by drawing a punch through the metal against a die. A draw stud connects the punch and die, and the drive pulls the punch through, leaving a clean hole sized to the die.

How does a hydraulic knockout punch work?

A hydraulic pump drives a ram that pulls the punch through the metal against the die. The operator pumps a handle to build pressure, and a release valve drops the pressure after the cut. Compared with a ratchet wrench drive, the hydraulic pump does the work so the operator applies less force on the handle.

How to use a hydraulic knockout punch?

Drill a pilot hole in the sheet metal, pass the draw stud through the punch, the workpiece and the die, then pump the handle until the punch draws through the metal. Release the pressure, remove the slug, and check the hole edge. Two of the kits here include a step drill bit for the pilot hole.

What is a knockout punch tool?

It is the full kit for cutting round holes in sheet metal: the hydraulic punch, punches and dies, draw studs and a storage case. The kits in this guide are sized for holes from 1/2 to 4 inches, per the listings.

Related: the knockout punch set hydraulic category hub, step drill bit vs twist drill bit for the pilot hole, best center punch for metal and best transfer punch set for layout.

Scoring, line by line

Each set is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. These are manual hydraulic tools with no safety listing to state, so every set here scores zero on safety and the ranking comes from the other four criteria.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
TEMCo TH0037 9.6 33 22 21 0 4
TEMCo TH0004 9.6 30 21 21 0 4
VEVOR SYK-15-10 9.5 32 22 21 0 0
VEVOR TPA-15 9.5 29 21 20 0 0
AMZCNC SYK-green 9.4 28 20 21 0 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

More buying guides

Metal Fab Tools ·

Best Metal Knockout Hole Punch Set (2026)

Five manual knockout punch sets compared for conduit and panel holes, with sizes, thickness limits, and kit contents from the listings.