Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Center Punch for Metal (2026)

Four center punches for metal compared: a 5-piece manual set, two automatic punches and a high-carbon single punch, with specs and Gear Scores.

Best Center Punch for Metal (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Klein Tools 66313 Center PunchBest single punchKlein Tools 66313 Center Punch9.6/10View on Amazon
  2. 2Starrett S117PC 5-Piece Steel Center Punch SetBest setStarrett S117PC 5-Piece Steel Center Punch Set9.6/10View on Amazon
  3. 3Starrett 18C Automatic Center PunchBest automaticStarrett 18C Automatic Center Punch9.5/10View on Amazon
  4. 4SANDOR Automatic Center Punch, 2-PackBest value 2-packSANDOR Automatic Center Punch, 2-Pack9.5/10View on Amazon

A drill bit walks across the steel, the hole lands off the mark, and the part is scrap. This roundup of the best center punch for metal compares four Amazon listings on what each one states: punch type, sizes, adjustment, materials, weight and warranty, with a Gear Score for each.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best single punch Klein Tools 66313 Center Punch: High-carbon steel with heat-treated points and a 1 year manufacturer warranty. Check price on Amazon
  • Best set Starrett S117PC 5-Piece Steel Center Punch Set: Five sizes from 1/16 to 5/32 in hardened and tempered steel with a plastic case. Check price on Amazon
  • Best automatic Starrett 18C Automatic Center Punch: Adjustable stroke with one-handed automatic strike, no hammer needed. Check price on Amazon
  • Best value 2-pack SANDOR Automatic Center Punch, 2-Pack: Two automatic punches with adjustable tension and a hard-shell case. Check price on Amazon

The machines

Klein Tools 66313 1/2-Inch Center Punch

Klein Tools 66313 1/2-Inch Center Punch

KLEIN TOOLS9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The Klein Tools 66313 is a 1/2 in center punch, 6 in long, in high-carbon steel. The listing states smooth-ground heat-treated points, a rugged design for impact strength, a corrosion-resistant black finish and Made in USA. Weight 4 ounces with a 1 year manufacturer warranty. Model 66313.

Pros

  • High-carbon steel, heat-treated points
  • Rugged design for impact strength
  • Corrosion-resistant black finish
  • 1 year manufacturer warranty

Cons

  • Single punch, one size only
  • Manual only, needs a hammer
  • No adjustment stated
  • 4 ounces for a single punch
Starrett Steel Center Punch, 0-4" Length

Starrett Steel Center Punch, 0-4" Length

Starrett9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The Starrett S117PC is a 5-piece steel center punch set, 4 in length, in 1/16, 5/64, 3/32, 1/8 and 5/32 in diameters. The listing states tapered points with round shanks and knurled finger grips, hardened and tempered steel, accurately centered tips and a plastic case. Weight 6.3 ounces. Part S117PC.

Pros

  • Five sizes from 1/16 to 5/32 in
  • Hardened and tempered steel
  • Knurled finger grips for control
  • Accurately centered tips for accuracy

Cons

  • Manual only, needs a hammer
  • 5 pieces to keep track of
  • 6.3 ounces is the heaviest set here
  • No adjustment stated
Starrett Steel Automatic Center Punch

Starrett Steel Automatic Center Punch

Starrett9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The Starrett 18C is an automatic center punch, 5-1/4 in long with an 11/16 in punch diameter. The listing states an internal mechanism that strikes on downward pressure, adjustable force via the knurled cap and a knurled steel handle. Weight 4.64 ounces. For metals, plastics, wood and other machinable materials.

Pros

  • Automatic strike, no hammer needed
  • Adjustable stroke via knurled cap
  • Knurled steel handle
  • Works on metal, plastic and wood

Cons

  • Single punch, one size only
  • No warranty term stated, so no warranty score
  • No safety certification stated, so no safety score
  • 4.64 ounces for a single punch
Heavy Duty Automatic Center Punch with Hardened

Heavy Duty Automatic Center Punch with Hardened

SANDOR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The SANDOR 2-pack is a pair of automatic center punches, each 5 in long with a 1/2 in shank, in hardened steel. The listing states a spring-loaded mechanism for one-handed operation, an adjustable knurled cap for tension, a deeply knurled surface and a point that removes for sharpening or replacement. A zippered hard-shell case is included. Weight 0.23 kg. Model SR088.

Pros

  • Two automatic punches in one box
  • Adjustable tension via end cap
  • Point removes for sharpening
  • Hard-shell zippered case included

Cons

  • No warranty term stated, so no warranty score
  • No safety certification stated, so no safety score
  • 0.23 kg for two punches
  • Automatic only, no manual option

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Type Sizes Length Adjustment Weight Warranty
Klein Tools 66313 Center Punch 9.6/10 Manual 1/2 in shank 6 in None stated 4 ounces 1 year
Starrett S117PC 5-Piece Steel Center Punch Set 9.6/10 Manual set 1/16 to 5/32 in 4 in None stated 6.3 ounces Term not stated
Starrett 18C Automatic Center Punch 9.5/10 Automatic 11/16 in dia 5-1/4 in Adjustable stroke 4.64 ounces None stated
SANDOR Automatic Center Punch, 2-Pack 9.5/10 Automatic 1/2 in shank 5 in Adjustable tension 0.23 kg None stated

All specs here repeat what the maker rates and the listing prints, copied down 22 October 2026.

Buying guide: the best center punch for metal

Manual or automatic

Two listings here are manual punches struck with a hammer: the Starrett 5-piece set and the Klein 66313. Two are automatic: the Starrett 18C with an internal mechanism that strikes when downward pressure is applied, and the SANDOR 2-pack with a spring-loaded mechanism for one-handed operation. Automatic suits one-handed marking and overhead work; manual suits the heaviest marks with a hammer behind them.

Sizes and sets

The Starrett S117PC listing states five punches in 1/16, 5/64, 3/32, 1/8 and 5/32 in diameters with a plastic case. The SANDOR listing states two automatic punches, each 5 in long with a 1/2 in shank, in a zippered hard-shell case. The Starrett 18C is a single automatic punch, 5-1/4 in long with an 11/16 in punch diameter. The Klein 66313 is a single punch, 6 in long with a 1/2 in shank. A 5-piece set covers small to large marks; a single automatic covers repeat marking at one size.

Adjustment

The Starrett 18C listing states an adjustable stroke: turning the knurled cap adjusts the force of the blow for different materials. The SANDOR listing states adjustable tension via the end cap, with lighter marks from releasing tension. The Starrett 5-piece and Klein listings state no adjustment. Adjustable force suits mixed materials; fixed suits one material.

Materials and points

The Starrett 5-piece listing states hardened and tempered steel with accurately centered tips ground at the proper angle. The Starrett 18C listing states corrosion-resistant steel. The SANDOR listing states hardened steel with a deeply knurled surface and a fine point tip that can be removed for sharpening or replacement. The Klein listing states high-carbon steel with smooth-ground heat-treated points and a corrosion-resistant black finish. Hardened and tempered or high-carbon steel is what keeps the point sharp.

Grip design follows the punch type. The Starrett 5-piece listing states round shanks with knurled finger grips for stability and control. The Starrett 18C listing states a knurled steel handle. The SANDOR listing states a deeply knurled surface that will not slip. The Klein listing states no grip texture beyond its rugged design. Knurling matters because the punch must not rotate or slip between marking and the hammer strike.

Weight and warranty

Listed weights: 6.3 ounces on the Starrett 5-piece set, 4.64 ounces on the Starrett 18C, 0.23 kg on the SANDOR 2-pack and 4 ounces on the Klein. The Klein listing states a 1 year manufacturer warranty. The Starrett S117PC listing states a warranty on defects in material and workmanship without a specific term. The other two listings state no concrete warranty term. A stated term is checkable; its absence leaves the warranty criterion unscored.

Before You Strike an Arc

  • Match the punch to the mark: 1/16 to 5/32 in on the Starrett set, single sizes on the others.
  • Set the adjustable stroke on the Starrett 18C or the SANDOR before marking hard steel.
  • Check the point on arrival: the SANDOR point removes for sharpening or replacement.
  • Wear eye protection; punching throws metal chips.
  • Clamp the workpiece; a moving part ruins the mark.

FAQ for welders

What does a center punch do?

It makes a small indentation that keeps a drill bit from walking. The Starrett 5-piece listing describes it: place the punch over the mark and strike with a hammer to indent the workpiece, then drill without slipping. The automatic listings do the same with a spring mechanism instead of a hammer.

Can you use a center punch on wood?

On the listings here, yes for some. The Starrett 18C listing states use on metals, plastics, wood and other machinable materials. The SANDOR listing names wood, metal, steel, aluminum, brass and copper. The Starrett 5-piece and Klein listings focus on metal; check the listing for your material.

How do you adjust an automatic center punch?

The Starrett 18C listing states the force is adjusted by turning the knurled cap for different materials. The SANDOR listing states tension is adjusted by unscrewing the end cap, with lighter marks from less tension. Start light and increase until the mark is clear.

What size punch do I need?

Match the punch to the drill bit that follows. The Starrett 5-piece set states 1/16, 5/64, 3/32, 1/8 and 5/32 in diameters, which covers small pilot holes to larger bits. Single punches suit one repeated size; a set covers the range.

Which warranty is stated here?

Only the Klein listing states a warranty with a concrete term, a 1 year manufacturer warranty. The Starrett S117PC listing states a warranty on defects in material and workmanship but no specific term, so it is not scored. The other two listings state no concrete warranty term.

Related: the best center punch for hardened steel, transfer punch vs center punch, the best transfer punch set and the metal fab tools hub.

Scoring, line by line

Each listing is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. One listing states a warranty with a concrete term: 1 year on the Klein. The Starrett S117PC listing states a warranty on defects in material and workmanship, but gives no specific term, so it is not scored on warranty. None states a safety certification, so every listing scores zero on safety; the ranking comes from performance, build, value and the Klein warranty.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Klein Tools 66313 Center Punch 9.6 27 21 19 n/a 2
Starrett S117PC 5-Piece Steel Center Punch Set 9.6 28 21 20 n/a 0
Starrett 18C Automatic Center Punch 9.5 28 20 19 n/a 0
SANDOR Automatic Center Punch, 2-Pack 9.5 26 19 20 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides

Metal Fab Tools ·

How to Use Center Punch on Metal

How to use a center punch to mark an exact starting spot for drilling, with the steps and the 4 punch sets that cover…