Best Drill Press Vise Under $50 (2026): 4 Picks Compared
Four drill press vises under $50 compared on jaw width, opening, weight and build for home and small-shop drill presses.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallForward Q194A 4 Inch Vise9.6/10View on Amazon - 2
Best Quick ReleaseMYTEC 3 Inch Quick Release Vise9.6/10View on Amazon - 3
Best Soft Jaw PadsZTUKOMN 4 Inch Drill Press Vise9.5/10View on Amazon - 4
Best Simple 4 InchROLIN 4 Inch Drill Press Vise9.5/10View on Amazon
Drilling a clean hole starts with a workpiece that does not move. A part held by hand can spin, grab the bit, or wander off the mark, and a vise that fits the drill press table keeps the work square to the bit. This guide compares the best drill press vise under 50 for home and small-shop drill presses, scored on jaw size, opening, build and value from what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Forward Q194A 4 Inch Vise: 4 inch jaw, 4-3/8 inch opening, serrated plate, slotted base Check price on Amazon
- Best Quick Release MYTEC 3 Inch Quick Release Vise: One-click button and locking jaw for fast part swaps Check price on Amazon
- Best Soft Jaw Pads ZTUKOMN 4 Inch Drill Press Vise: Multi-groove pads for irregular small items, 4.2 inch jaw Check price on Amazon
- Best Simple 4 Inch ROLIN 4 Inch Drill Press Vise: Plain gray cast iron vise with a hardened steel jaw Check price on Amazon
The machines

Forward Q194A 4 Inch Drill Press Vise Portable
A 4 inch cast iron drill press vise with a slotted base, a serrated jaw plate and the widest opening in this guide.
Pros
- Widest opening here at 4-3/8 inches, with a 4 inch jaw width
- Serrated jaw plate with a maker-claimed clamping force of about 2200 lbs
- Cast iron construction rated at 30,000 PSI by the maker
- Slotted base mounts and locates on drill presses
Cons
- Light duty design, so it suits light tasks rather than heavy milling
- Jaw throat depth of 3/4 inch limits tall work held on edge
- No warranty term stated on the listing
- No safety certification stated on the listing

MYTEC Drill Press Vise, 3.0" Black
A 3.0 inch cast steel drill press vise with a quick positioning button, a locking function and hardened steel jaws.
Pros
- Quick positioning button moves the jaws in one motion, with a locking function
- Hardened steel jaws with a maker-claimed capacity of up to 1120 lbs
- Cast steel construction with a sprayed, corrosion-resistant surface
- Lightest pick here at 4.5 pounds in the bullets, easy to move between jobs
Cons
- Smallest jaw here at 3.0 inches, with the smallest opening at 2.95 inches
- No warranty term stated on the listing
- No safety certification stated on the listing

Drill Press Vise,4" Heavy Duty Bench Vise
A 4 inch drill press vise with a quick adjustment button and multi-groove soft jaw pads for irregular small items.
Pros
- Widest jaw here at 4.2 inches, with a 4.25 inch max opening
- Quick button adjusts the jaw range without full handle travel
- Multi-groove soft jaw pads handle irregular small items
- Screws listed for fixing the vise to a drill floor or desktop
Cons
- No material stated on the listing, so build cannot be compared on stated specs
- No clamping force figure stated on the listing
- No warranty term stated on the listing
- No safety certification stated on the listing

Vise Drill Press Vise 4 Inch Light Duty Workbench
A 4 inch gray cast iron drill press vise with a hardened steel jaw for woodworking, metalworking and drilling.
Pros
- 4 inch jaw with a 4.33 inch opening covers broad stock
- Hardened steel jaw for woodworking, metalworking and drilling
- Gray cast iron body at 6.5 pounds, steady on the table
- Simple design with easy installation on a workstation
Cons
- Thinnest listing here: no jaw height, no clamping force and no opening detail beyond 4.33 inches
- No warranty term stated on the listing
- No safety certification stated on the listing
- No quick release or jaw pads listed, so jaw changes run on the screw handle
Other welders and gear to compare
4 Inches Cast Iron Drill Press Vise 4" Brand: AnnurssyCheck price on Amazon
VEVOR Drill Press ViseCheck price on Amazon
WEN Tilting ViseCheck price on Amazon
Drill Press ViseCheck price on Amazon
WEN Drill Press ViseCheck price on Amazon
PONY Drill Press ViseCheck price on Amazon
Spec sheet comparison
| Vise | Gear Score | Jaw Width | Opening | Weight |
|---|---|---|---|---|
| Forward Q194A 4 Inch Vise | 9.6/10 | 4 inch | 4-3/8 inch | 6.6 pounds |
| MYTEC 3 Inch Quick Release Vise | 9.6/10 | 3.0 inch | 2.95 inch | 4.5 pounds |
| ZTUKOMN 4 Inch Drill Press Vise | 9.5/10 | 4.2 inch | 4.25 inch | 7 pounds |
| ROLIN 4 Inch Drill Press Vise | 9.5/10 | 4 inch | 4.33 inch | 6.5 pounds |
Ratings in this table are the makers’ own claims taken from each product page (28 October 2026).
Buying guide: the best drill press vise under 50
Jaw width and opening
Jaw width sets how wide a part the vise can hold, and opening sets how thick a part it can swallow. The Forward and ROLIN vises offer a 4 inch jaw, the ZTUKOMN a 4.2 inch jaw, and the MYTEC a 3.0 inch jaw, so the MYTEC suits smaller work while the wider jaws cover broader stock. Openings run from 2.95 inches on the MYTEC to 4-3/8 inches on the Forward, and the vise should open wider than the thickest part you plan to drill. Measure the work first, then buy the opening, not the other way around.
Quick release and jaw pads
A quick release button moves the jaws fast without cranking the handle through its full travel, which matters when swapping parts all day. The MYTEC and ZTUKOMN both list a quick button, while the Forward and ROLIN use a plain screw handle. The ZTUKOMN adds multi-groove soft jaw pads for irregular small items, and the Forward uses a serrated jaw plate for grip, so match the jaw face to the work: serrated jaws bite, soft pads protect odd shapes.
Weight and mounting
Weight here runs from 4.5 pounds on the MYTEC to 7 pounds on the ZTUKOMN, with the Forward at 6.6 pounds and the ROLIN at 6.5 pounds, so none of these anchors a big press by mass alone. Mounting does the real holding: the Forward lists a slotted base for mounting on drill presses, and the ZTUKOMN lists screws for fixing the vise to a drill floor or desktop. Bolt the vise down before drilling, and check that the base slots line up with the table slots on your press.
Cast iron versus cast steel
The Forward lists cast iron rated at 30,000 PSI, the MYTEC lists high-grade cast steel, and the ROLIN lists gray casting iron, while the ZTUKOMN states no material at all. A stated material and a stated strength figure give something to compare; an unstated material gives nothing, and that gap costs the ZTUKOMN on build. Cast iron and cast steel both serve light duty drill press work, but a vise used for milling or heavy drilling deserves a closer look at the jaw and screw before buying. For holding work beyond the drill press, see our best quick clamps for metal.
Clamping safety. A vise only holds what it grips, so seat the work fully on the jaw faces, keep hands clear of the bit path, and follow the manual the maker points to. The Forward listing says to read, understand and follow all instructions in the manual before setup and use, and that advice applies to every vise here. Disconnect power before changing the setup, and clear chips before re-clamping.
Before You Strike an Arc
- Bolt the vise down through its base slots or screws before drilling, and check the slots line up with the drill press table.
- Check the jaw opening against the thickest part you plan to drill, and confirm the jaw width covers the part.
- Read the manual before setup and use, as the Forward listing instructs.
- Check the jaw faces on arrival: serrated plates on the Forward, soft pads on the ZTUKOMN, hardened jaws on the MYTEC and ROLIN.
- For irregular small items, use the soft jaw pads the ZTUKOMN lists rather than bare steel jaws.
FAQ for welders
What jaw width do I need for a drill press vise?
Match the jaw to the work, not the press. The picks here offer jaws from 3.0 inches on the MYTEC to 4.2 inches on the ZTUKOMN, with the Forward and ROLIN at 4 inches. A wider jaw holds broader stock, while a narrower jaw suits small parts and keeps the vise light on a small table.
Does a quick release button matter?
It matters when you swap parts often, since it moves the jaws without cranking the handle through its full travel. The MYTEC lists a one-click quick positioning button with a locking function, and the ZTUKOMN lists a quick button for jaw adjustment. The Forward and ROLIN use a plain screw handle, which is fine for one-off holes but slower across a batch.
Can I mount these vises on any drill press?
Check the base against your table before buying. The Forward lists a slotted base for mounting on drill presses, the MYTEC claims a universal design for the majority of drill presses, and the ZTUKOMN lists screws for a drill floor or desktop. The ROLIN lists easy installation on a workstation, with no base detail stated, so confirm its footprint against your table slots.
What should I check on arrival?
Check the jaw opening, the jaw faces and the mounting hardware first. The Forward should show a serrated jaw plate and a slotted base, the ZTUKOMN its multi-groove soft jaw pads, and the MYTEC its quick positioning button and locking function. Read the manual before setup, as the Forward listing instructs, and confirm the vise sits flat on the table before drilling.
Related: best quick clamps for metal, and the metal fab tools hub. Also see our best bar clamps under $40.
Scoring, line by line
Each vise is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing, and no pick here states a warranty term or a safety certification, so those two scores sit at zero across the board.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Forward Q194A 4 Inch Vise | 9.6 | 30 | 21 | 21 | n/a | 0 |
| MYTEC 3 Inch Quick Release Vise | 9.6 | 28 | 21 | 20 | n/a | 0 |
| ZTUKOMN 4 Inch Drill Press Vise | 9.5 | 28 | 19 | 20 | n/a | 0 |
| ROLIN 4 Inch Drill Press Vise | 9.5 | 27 | 19 | 19 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




