Best Variable Speed Bench Grinder (2026): 3 Compared
Three variable speed bench grinders compared by RPM range, motor, wheels and warranty: dial-adjustable speed for sharpening and shaping.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDELTA 23-196 Grinder9.6/10View on Amazon - 2
Best 8-InchShop Fox W1840 Grinder9.5/10View on Amazon - 3
Brushless PickGreteefor 6-Inch Grinder9.5/10View on Amazon
The best variable speed bench grinder lets you dial the RPM to the job, from slow sharpening to faster grinding. We compared three listings by speed range, motor, wheels and warranty, using only what each listing publishes. All three list dial-adjustable variable speed.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
- Best Overall DELTA 23-196 Grinder: 2000-3400 RPM variable, 5-year warranty, 36 and 60 grit. Check price on Amazon
- Best 8-Inch Shop Fox W1840 Grinder: 2000-3400 RPM variable, 3/4 HP, work light, 2-year warranty. Check price on Amazon
- Brushless Pick Greteefor 6-Inch Grinder: 1725-3450 RPM variable, brushless motor, LED light, dresser. Check price on Amazon
The machines

Delta Power Tools 23-196 6-Inch Variable Speed
A 6-inch variable speed grinder from 2000 to 3400 RPM with a 5-year warranty.
Pros
- 2000 to 3400 RPM variable
- 5 year warranty, longest
- 36 and 60 grit wheels
- Drill bit rest in tool rest
Cons
- No safety certification stated
- 6-inch, smaller than 8-inch
- 2.5 Amp motor
- 29.5 pounds

Shop Fox W1840 Variable-Speed Grinder with Work
An 8-inch variable speed grinder from 2000 to 3400 RPM with work light and 2-year warranty.
Pros
- 2000 to 3400 RPM variable
- 3/4 HP motor
- Work light included
- 2 year warranty
Cons
- No safety certification stated
- Wheel grit not stated
- 40 pounds
- Black/white color only

6-Inch Variable Speed Bench Grinder with Grinding
A 6-inch variable speed grinder from 1725 to 3450 RPM with brushless motor and LED light.
Pros
- 1725 to 3450 RPM variable
- Brushless induction motor
- LED work light
- Diamond dresser included
Cons
- No warranty term stated
- No safety certification stated
- 6-inch, smaller
- Green color only
Other welders and gear to compare
WEN BG625V 2.5-Amp 6-Inch Variable Speed Bench Grinder withCheck price on Amazon
WEN BG4276 2.1-Amp 6-Inch Single Speed Bench Grinder withCheck price on Amazon
WEN BG4260 2.1-Amp 6-Inch Single Speed Bench GrinderCheck price on Amazon
WEN BG4282 4.8-Amp 8-Inch Single Speed Bench Grinder with LEDCheck price on Amazon
Berkling BT 6323 1/4in Angle Air Die GrinderCheck price on Amazon
Spec sheet comparison
| Grinder | Gear Score | Speed | Motor | Wheels | Warranty |
|---|---|---|---|---|---|
| DELTA 23-196 Grinder | 9.6/10 | 2000-3400 RPM variable | 2.5A | 36 and 60 grit | 5 year |
| Shop Fox W1840 Grinder | 9.5/10 | 2000-3400 RPM variable | 3/4 HP | Not stated | 2 year |
| Greteefor 6-Inch Grinder | 9.5/10 | 1725-3450 RPM variable | Brushless | 36 and 60 grit | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 22 October 2026.
How to choose the best variable speed bench grinder
True variable speed
All three listings are truly variable: the DELTA (2000 to 3400 RPM via dial), the Shop Fox (2000 to 3400 RPM) and the Greteefor (1725 to 3450 RPM).
Motor and wheels
The Shop Fox lists 3/4 HP; the DELTA lists 2.5 Amp; the Greteefor lists a brushless induction motor. Wheel grits: DELTA 36 and 60, Shop Fox not stated, Greteefor 36 and 60.
Warranty
The DELTA lists a 5 year limited warranty, the longest here. The Shop Fox lists a 2 year warranty. The Greteefor lists no warranty term. For a tool that vibrates, the warranty term matters.
Speed control types compared
The DELTA lists an upfront variable speed dial from 2000 to 3400 RPM on a 2.5 Amp induction motor, with 36 and 60 grit wheels and a drill bit rest milled into the left tool rest for the correct tip angle. The Shop Fox lists a 3/4 HP variable-speed induction motor at 2000 to 3400 RPM with dual 8 in aluminum-oxide wheels and dual adjustable aluminum work rests. The Greteefor lists a 2.5A brushless induction motor at 1725 to 3450 RPM with 36 and 60 grit wheels on a 1/2 in arbor. A dial gives infinite speeds between the endpoints.
Wheel grit and the job
Stated grits: DELTA 36 and 60; Shop Fox not stated; Greteefor 36 and 60. Coarse 36 grit shapes and removes stock fast; 60 grit is the general sharpening grit. Match the grit to the job: 36 for shaping, 60 for sharpening.
Tool rests and setup
The DELTA’s left tool rest has a drill bit rest milled in for the correct tip angle. The Shop Fox lists dual adjustable aluminum work rests. An adjustable tool rest is not a luxury: as the wheel wears, the gap grows, and a rest that cannot move closer becomes unsafe and imprecise. Check that the rests adjust and lock, per the listing.
Motor types
The DELTA lists a 2.5 Amp induction motor; the Shop Fox a 3/4 HP variable-speed induction motor; the Greteefor a 2.5A brushless induction motor stated for steady torque, quieter operation and durability. Induction motors are the standard for bench grinders: quiet, durable, no brushes to replace. The Greteefor’s brushless claim is the outlier here. For a grinder that runs hours a week, motor type and duty matter more than peak HP.
Slow speed and heat
The slow end of the range is where sharpening happens: 1725 RPM (Greteefor low) and 2000 RPM (DELTA, Shop Fox low). If the work is mostly sharpening, the low-speed figure matters more than the high.
What buyers get wrong
The classic mistake is buying on HP alone: a big motor at one fixed speed cannot slow down for delicate edges. The second is ignoring the low-speed figure: 1725 RPM versus 2000 RPM matters for heat-sensitive edges. The third is skipping the mount: bolt down if the listing recommends it. Match the speed type to the work first, then the motor. For a first grinder, the dial-variable three cover the most jobs: slow for edges, fast for shaping.
Wheel size and arbor
The Shop Fox lists dual 8 in wheels with a 5/8 in bore. The Greteefor lists a 1/2 in arbor for its 36 and 60 grit wheels. Wheel size sets the surface speed at a given RPM: an 8 in wheel at 3450 RPM cuts faster than a 6 in wheel at the same RPM. Check the arbor size when buying replacement wheels: a 5/8 in bore wheel does not fit a 1/2 in arbor without a bushing.
Setup Notes
- Verify the speed range per the listing: 2000 to 3400 RPM on the DELTA and Shop Fox, 1725 to 3450 RPM on the Greteefor.
- Check wheel grit: 36 for shaping, 60 to 120 for sharpening, per the listings.
- Mounting: the listings describe cast iron bases; bolt down if the listing recommends it.
FAQ for welders
What speed ranges do the three cover?
The DELTA covers 2000 to 3400 RPM, the Shop Fox covers 2000 to 3400 RPM, and the Greteefor covers 1725 to 3450 RPM, all dial-adjustable.
Which has the longest warranty?
The DELTA lists a 5 year limited warranty. The Shop Fox lists 2 years. The Greteefor lists none.
Do any list a safety certification?
None of the three listings states a safety certification. Safety scores zero across the board.
Which grinder has a brushless motor?
The Greteefor lists a 2.5A brushless induction motor. The DELTA lists a 2.5 Amp induction motor and the Shop Fox lists a 3/4 HP variable-speed induction motor.
What wheel sizes do the three use?
The DELTA and Greteefor are 6-inch grinders. The Shop Fox is an 8-inch grinder with dual 8-inch wheels.
Scoring, line by line
The Gear Score weighs performance, build, value, safety and warranty. Performance favors dial-adjustable RPM. Safety scores stated certifications; none of the three lists one, so safety is zero across the board. Warranty scores the stated terms: 5 year, 2 year or none. How we pick explains the weights.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DELTA 23-196 Grinder | 9.6 | 32 | 21 | 21 | 0 | 3 |
| Shop Fox W1840 Grinder | 9.5 | 30 | 21 | 20 | 0 | 3 |
| Greteefor 6-Inch Grinder | 9.5 | 30 | 20 | 20 | 0 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.
More welding guides
See every metal fab tools guide. Also see our best bench grinder for beginners and fixed vs variable speed angle grinder.
More picks: belt grinder for welders and bench grinder vs die grinder.




