Ultrasonic Cleaner Sizes: Tank Capacity Chart
Match the tank to the largest part you need to submerge, then check power, heat and timer against the three sizes in this chart.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
VEVOR 50L Ultrasonic Cleaner 840W Professional9.5/10View on Amazon - 2
CREWORKS 15L Ultra Sonic Cleaning Machine9.5/10View on Amazon - 3
CREWORKS 10L Digital Ultrasonic Cleaning Machine9.5/10View on Amazon
A carburetor caked in varnish, a handful of bolts rusted solid, a chain that needs every link clean. The part goes in the tank, the tank goes in the machine, and the size question comes down to one thing: the tank has to swallow the largest part whole, basket and all. That is the whole answer to ultrasonic cleaner sizes. Pick the smallest tank that fits the largest part you clean, and let power follow the tank.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

VEVOR 50L Ultrasonic Cleaner 840W Professional
A 50L cleaner with 840W at 40kHz, a 0 to 80°C range, a stainless basket and tank, wheels and a digital display.
Pros
- 840W is the highest ultrasonic power here
- 40kHz waves, 40,000 microbubbles per second stated
- Temperature adjusts from 0 to 80°C
- Wheels and an upgraded handle move a full tank
Cons
- No heater watt figure is stated
- No timer range is stated
- No warranty term is stated
- 53.79 lb is the heaviest stated weight here

CREWORKS 15L Ultra Sonic Cleaning Machine
A 15L cleaner with 360W at 40kHz, heat up to 300W, a 1 to 30 minute timer and a 70 to 175°F range.
Pros
- 360W with heat up to 300W
- 40kHz cavitation with a 1 to 30 minute timer
- Temperature sets between 70 and 175°F
- 304 stainless inner basket and tank with 201 stainless outside
Cons
- No warranty term is stated
- 4 gallon basin is smaller than the 50L tank
- No drain valve is stated
- No wheels are stated for moving a full tank

CREWORKS 10L Digital Ultrasonic Cleaning Machine
A 10L cleaner with 240W, heat up to 300W, a timer up to 30 minutes and a built-in drain valve.
Pros
- 240W with heat up to 300W for small and intricate surfaces
- Temperature sets between 20 and 80°C, 68 and 176°F
- Timer sets up to 30 minutes on an intuitive control panel
- Built-in drain valve and inset handles for emptying and carrying
Cons
- 10L tank is the smallest here
- No 40kHz frequency is stated
- No wheels are stated
- No spare basket is named
Ultrasonic cleaner sizes: the tank capacity chart
The three cleaners in this guide span the sizes a home shop meets: a 10L tank, a 15L tank and a 50L tank. The basket sits inside the tank, so the part has to fit the basket, not just the tank.
| Cleaner | Gear Score | Tank size | Ultrasonic power | Temperature range | Timer |
|---|---|---|---|---|---|
| VEVOR 50L | 9.5/10 | 50L | 840W | 0 to 80°C | Not stated |
| CREWORKS 15L | 9.5/10 | 15L, 4 gallon basin | 360W | 70 to 175°F | 1 to 30 minutes |
| CREWORKS 10L | 9.5/10 | 10L, 2.6 gal | 240W | 20 to 80°C, 68 to 176°F | Up to 30 minutes |
The 10L CREWORKS runs 240W with heat up to 300W. The 15L CREWORKS runs 360W with heat up to 300W. The 50L VEVOR runs 840W. All three state a stainless tank and basket.
How to measure the part against the tank
Measure the longest side of the largest part, then check it against the basket. The basket holds the part off the tank floor, and the solution has to cover the part. A carburetor fits the 15L basket the maker describes, and a full set of industrial parts needs the 50L tank with its basket and wheels. Jewelry, glasses and retainers fit the 10L tank.
What changes as the tank gets bigger
Power climbs with the tank. The 10L CREWORKS uses 240W of ultrasonic power, the 15L CREWORKS uses 360W, and the 50L VEVOR uses 840W at 40kHz. Both CREWORKS machines state heat up to 300W, while the VEVOR states an adjustable temperature from 0 to 80°C without a heater watt figure. Timer range is stated on the two smaller machines, up to 30 minutes on the 10L and 1 to 30 minutes on the 15L, while the VEVOR states timer settings without a range. The 50L VEVOR adds wheels and a digital display, and the 10L CREWORKS adds a built-in drain valve for emptying it. Drill bits are named among the uses of the 15L CREWORKS; see our best drill bit to drill through metal guide.
The gear: three cleaners that cover the sizes
Each cleaner below handles one step of the sizing job: small parts, carburetors and tools, then full industrial parts.
FAQ for welders
What size ultrasonic cleaner do I need for bike parts?
Measure the largest part against the basket. The 15L CREWORKS states automotive parts, tools and drill bits among its uses, and the 10L CREWORKS states small and intricate surfaces. A part that fits the 10L basket needs no bigger tank.
What size ultrasonic cleaner do I need for a carburetor?
The 15L CREWORKS names carburetors among its uses, and the 50L VEVOR names carburetor channels too. Either tank takes a carburetor: the 15L runs 360W with heat up to 300W, and the 50L runs 840W with wheels. The 10L names auto tool and machine parts, so measure the carburetor against its basket first.
How hot does the solution get?
The 10L CREWORKS states a temperature between 20 and 80°C, which the maker also gives as 68 and 176°F. The 15L CREWORKS states a temperature between 70 and 175°F. The 50L VEVOR states an adjustable temperature from 0 to 80°C. Set the temperature the part calls for.
How long should a cleaning cycle run?
The 10L CREWORKS states a cleaning time of up to 30 minutes. The 15L CREWORKS states a timer from 1 to 30 minutes. The 50L VEVOR states customizable timer settings without a range.
Do I need a basket in the tank?
All three cleaners state a stainless basket, and the basket holds the part off the tank floor. The 10L and 15L CREWORKS state a 304 stainless basket and tank, and the 50L VEVOR states a stainless steel basket and inner tank. Use the basket every cycle.
Related: what you can clean in an ultrasonic cleaner, ultrasonic parts cleaner solution, parts washer ultrasonic, and the metal fab tools hub. Also see our high pressure parts washer.
Scoring, line by line
The Gear Score weighs performance (tank size, ultrasonic power, heat and timer), build (stainless tank and basket, feet, handles and wheels), value, safety and warranty. None of the three states a safety certification or a warranty term, so safety and warranty score zero across the group. How we pick explains the weights.




