Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Ultrasonic Cleaner Maintenance: Care and Cleaning Tips

Ultrasonic cleaner maintenance means changing the solution when it is dirty, rinsing and drying the parts, and picking a concentrate that suits the job, with concentrates for gun parts and carburetors compared here.

Ultrasonic Cleaner Maintenance: Care and Cleaning Tips
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Sylvan Hills 32 Oz. Ultrasonic Carburetor & PartsSylvan Hills 32 Oz. Ultrasonic Carburetor & Parts9.7/10View on Amazon
  2. 2Ultrasonic Gun Cleaning SolutionUltrasonic Gun Cleaning Solution9.6/10View on Amazon

A tank full of cloudy fluid and parts that come out filmed are the signs that the cleaning routine has slipped. The fluid carries the cleaning in an ultrasonic cleaner, and spent fluid cleans less well. Ultrasonic cleaner maintenance is the routine that keeps the tank and the fluid working: change the solution when it is dirty, rinse and dry the parts, and keep the tank clean between runs.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Sylvan Hills 32 Oz. Ultrasonic Carburetor & Parts

Sylvan Hills 32 Oz. Ultrasonic Carburetor & Parts

Sylvan Hills9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 32 oz concentrate that mixes into 50 gallons of fluid for carburetors, engine parts and small metal parts, with a cloth in the box.

Pros

  • 32 oz of concentrate mixes into 50 gallons of fluid at 1:250
  • Suits aluminum, brass, copper and steel parts
  • Works in ultrasonic and immersion machines
  • A microfiber cloth is in the box for drying parts

Cons

  • No warranty term is stated
  • Mixing at 1:250 needs measuring for each batch
  • A concentrate, so clean water and a container are needed to mix each batch
  • No measuring cup is included for the 1:250 mix
Ultrasonic Gun Cleaning Solution

Ultrasonic Gun Cleaning Solution

Samorillo9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 gallon jug that mixes into 8 gallons of fluid for firearms, brass and small parts, safe on steel, aluminum, polymer and brass.

Pros

  • 1 gallon jug mixes into 8 gallons of cleaning fluid
  • Safe on steel, aluminum, polymer and brass finishes
  • Lifts carbon residue, powder buildup and oils
  • Made in the USA

Cons

  • No warranty term is stated
  • Makes 8 gallons, far less fluid than the Sylvan Hills concentrate
  • Aimed at gun parts, so it is not the pick for carburetor work
  • The 8.5 lb jug is heavy to lift and pour

Ultrasonic cleaner maintenance in the shop

Maintenance here means looking after the fluid and the tank, not the machine electronics. The solution carries the cleaning to the parts, and the tank holds the solution, so both need care. When the fluid is visibly dirty it lifts less residue, and the maker of the Sylvan Hills concentrate says to replace the mixture when visibly dirty. Fresh fluid, a rinse and a dry finish the job.

When to change the solution

Change the solution when the fluid is visibly dirty or when parts come out with a film. The Sylvan Hills listing says to replace the mixture when visibly dirty, and to rinse parts and dry them with the included microfiber cloth. A dirty bath cleans less well, so a fresh mix is the simple fix.

Side by side

Fluid it makes Size Suits Made in
Sylvan Hills Carburetor Solution 50 gal 32 oz concentrate Carburetors and engine parts USA
Samorillo Gun Cleaning Solution 8 gal 1 gal jug Firearms, brass and small parts USA

The concentrates differ mainly in what they are made for: a jug for gun parts and a bottle for carburetors and engine hardware. Both are concentrates that mix into cleaning fluid, and both are made in the USA.

The gear for the job

The fluid is the part of the routine that gets bought and mixed, so the concentrates below cover the jobs in this guide: the Samorillo jug for gun parts and brass, and the Sylvan Hills bottle for carburetors and engine hardware.

FAQ for welders

How often should the solution in an ultrasonic cleaner be changed?

Change it when the fluid is visibly dirty. The Sylvan Hills listing says to replace the mixture when visibly dirty, and dirty fluid lifts less residue from the parts. Rinse the parts and dry them after each run so residue does not dry back onto the metal.

Can the same solution clean gun parts and carburetor parts?

Yes, the Sylvan Hills bottle can. It is made for carburetors, engine parts and small metal components, and its listing also names gun components among the parts it cleans. The Samorillo jug is made for firearms, brass and small parts. Pick the concentrate that matches the parts in the tank.

Do parts need rinsing after ultrasonic cleaning?

Yes. The Sylvan Hills listing says to rinse parts and dry them with the included microfiber cloth after cleaning. Rinsing takes the loosened residue and the used solution off the parts before they dry.

What metals can go in an ultrasonic cleaner with these solutions?

The Samorillo solution (on Amazon) is listed as safe on steel, aluminum, polymer and brass. The Sylvan Hills solution is listed for aluminum, brass, copper and steel. Check the finish on the part before it goes in the tank, and keep parts with unknown finishes out.

Related: what can you clean in an ultrasonic cleaner and the metal fab tools hub.

More buying guides

Metal Fab Tools ·

Can Ultrasonic Cleaner Remove Rust?

An ultrasonic cleaner lifts loose rust off small steel parts when the solution suits rust and the cycle runs long enough.

Metal Fab Tools ·

Ultrasonic Parts Cleaner Solution Guide

An ultrasonic parts cleaner solution lifts grease, varnish and dirt off metal parts in the tank, and the right one matches the metal and…