Types of Deburring Tools and When to Use Each
Swivel blade tools, 19-piece kits and 11-blade sets all remove burrs, but they suit different edges, materials and hands.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Deburring Tool 3D Printing Kit 19-Pcs for Resin9.7/10View on Amazon - 2
AFA Tooling Deburring Tool, 11 M2 HSS Blades9.6/10View on Amazon - 3
DKIBBITH Deburring Tool Set 11 Pieces of High9.6/10View on Amazon
A fresh cut leaves a sharp edge, and that edge catches gloves, snags cloth and keeps parts from fitting together. Types of deburring tools all answer the same problem in different ways: a swivel blade that follows the edge, a kit that adds files and cutters, or a plain set of spare blades. This guide lays out each type, what it handles, and how to match the tool to the edge in front of you.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Deburring Tool 3D Printing Kit 19-Pcs for Resin
A 19-piece kit with 11 M2 HSS blades, 5 diamond files, flush cutters and needle-nose pliers, built for 3D printing cleanup and metal edge work.
Pros
- 11 M2 HSS blades in two geometries, curved and flat
- 5 diamond files reach where blades cannot
- Flush cutters and needle-nose pliers for tight spaces
- Thick knurled aluminum grip, 5.12 in long, 0.71 in across
Cons
- No warranty term is stated
- Loose files and cutters need a home in your own toolbox
- Built for 3D printing, so metal-only shops pay for files they may not need
- Two blade geometries to keep track of

AFA Tooling Deburring Tool, 11 M2 HSS Blades
A swivel deburring tool with 11 M2 HSS blades, a 148 mm anodized aluminum handle and a storage case for the spare blades.
Pros
- 11 BS1010 blades in M2 steel, tempered to HRC 62 to 64
- 148 mm anodized aluminum handle, 12 mm hex grip
- 360-degree swivel follows edges, cross bores and recesses
- Storage case holds the 10 spare blades
Cons
- No warranty term is stated
- No files or cutters, so fine detail work needs another tool
- BS1010 blades only, no other blade shape in the kit
- 148 mm handle suits a full grip, not a pencil grip

DKIBBITH Deburring Tool Set 11 Pieces of High
An 11-blade set with a black anodized aluminum hex handle, a blade that rotates in the handle, and 10 extra blades in an organized case.
Pros
- 11 high-speed steel blades with 10 spares in a case
- Blade rotates in the handle for round workpieces
- Black matte hex handle will not roll off the bench
- Anodized aluminum handle, heavy-duty yet lightweight
Cons
- No files, cutters or pliers in the set
- Stainless steel is not among the materials the maker lists
- No spare handle in the set
- High-speed steel blades, not the M2 grade the other tools state
Types of deburring tools at a glance
A swivel blade tool holds a blade in a handle that lets it rotate, so the cutting edge tracks curves and bores without forcing the angle. A deburring kit adds diamond files, flush cutters and pliers around the swivel head, which suits 3D print cleanup and tight spots. A blade set keeps it simple: a handle and a case of spare blades for steady hand deburring on metal, plastic and pipe.
Side by side
| Swivel blade tool | 19-piece kit | 11-blade set | |
|---|---|---|---|
| Blades | 11 M2 HSS blades | 11 M2 HSS blades | 11 HSS blades |
| Handle | 148 mm anodized aluminum, 12 mm hex grip | 5.12 in knurled aluminum grip | Black anodized aluminum hex handle |
| Extras | Case for 10 spare blades | 5 diamond files, flush cutters, pliers | 10 extra blades in a case |
| Swivel | 360-degree rotation | 360-degree rotation | Blade rotates in the handle |
| Materials listed | Stainless steel, copper, brass, aluminum, PVC | Metal, resin, PVC, copper | Aluminum, copper, PVC, brass, plastic, resin |
Blade count looks the same across the tools here, since each carries 11 blades, but the kits part ways on what sits around the blade: files and cutters, a storage case, or nothing but spares. Match the extras to the work, not the blade count.
The deburring tools
Each tool below handles a step in the same job: taking the sharp edge off a cut part so it fits, feels and looks right.
How to match the tool to the edge
Start with the material. Every tool here lists aluminum, copper and PVC, and the AFA also lists stainless steel, so stainless work narrows the choice fast. Then look at the edge: a swivel blade follows curves, cross bores and recesses, while diamond files reach spots a blade cannot.
Then weigh the handle. The AFA handle measures 148 mm with a 12 mm hex grip, and the 19-piece kit grip measures 5.12 in long and 0.71 in across. A hex grip will not roll off the bench.
When to swap a blade
A blade that drags, skips or leaves a rough edge is done, and the listings make the fix easy: every tool here ships with spare blades, from 10 spares in a case to a full 11-blade set. Swap the blade when the cut feels rough, and keep the spares in the case so they stay sharp.
FAQ for welders
What is a deburring tool?
A deburring tool is a hand tool that removes the sharp burr left by cutting, drilling or printing a part. A swivel blade tracks the edge and shaves the burr off, leaving a clean edge that fits and feels smooth.
What is the difference between a deburring tool and a metal file?
A deburring blade shaves a burr off an edge in a pass, while a file abrades the surface and suits fine detail work. The 19-piece kit here pairs blades with 5 diamond files, so the files handle spots the blade cannot reach. See our deburring tool vs metal file guide.
Do deburring blades fit every handle?
Not always. The tools here use BS1010 blades or the blades in their own kits, so check the blade type in the listing before ordering spares.
Can a deburring tool clean up 3D prints?
Yes. The AFA tool and the 19-piece kit are made for 3D printing cleanup, handling brims, rafts, support artifacts and skirts on PLA, PETG, ABS and resin prints. The swivel blade follows print edges without gouging the part.
How long do deburring blades last?
It depends on the material and how much edge you run through them. The AFA blades are M2 high-speed steel tempered to HRC 62 to 64, and the maker states they hold an edge up to 80% longer than standard carbon steel. Keep spares on hand, since every kit here includes them.
Related: best air powered deburring tool, best deburring tool for stainless steel, and the metal fab tools hub.




