Best Clamp On Bench Vise (2026): 5 Portable Picks
Best clamp on bench vise, scored on five portable picks: jaw opening and width, table grip thickness, swivel, pipe jaws and the warranty terms each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallWilton Super-Junior Clamp-On Vise9.5/10View on Amazon - 2
Best 2-in-1 MountGOEHNER’s 2-in-1 Clamp-On Bench Vise9.6/10View on Amazon - 3
Strongest Stated Clamping ForceHousolution 3 Inch Universal Table Vise9.5/10View on Amazon - 4
Best for Pipe WorkIRWIN 3 Inch Clamp-On Vise9.4/10View on Amazon - 5
Most PortableMYTEC 2.5 Inch Clamp-On Home Vise9.3/10View on Amazon
A clamp-on bench vise is the portable answer to workholding: no bolts, no drilled holes, just a clamp that bites the edge of any bench or table. The best clamp on bench vise for your shop depends on jaw size, how thick a table it can grip, and whether you need extras like pipe jaws or a swivel base. We scored five clamp-on vises using only what each listing states.
We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
Quick picks
- Best Overall Wilton Super-Junior Clamp-On Vise: The widest jaws here at 4 inches, replaceable grooved jaws, double lockdowns, and the only stated lifetime warranty. Check price on Amazon
- Best 2-in-1 Mount GOEHNER’s 2-in-1 Clamp-On Bench Vise: Bolts down or clamps on, 360 degree swivel, hardened jaws, and a stated 3 year warranty. Check price on Amazon
- Strongest Stated Clamping Force Housolution 3 Inch Universal Table Vise: A stated 300 kg clamping force from a cast steel body with a chrome-plated spindle and 360 degree swivel. Check price on Amazon
- Best for Pipe Work IRWIN 3 Inch Clamp-On Vise: The only integrated pipe jaws here, plus an anvil shaping horn, in a compact 3 inch vise. Check price on Amazon
- Most Portable MYTEC 2.5 Inch Clamp-On Home Vise: A stated 3.31 lb net weight with 360 degree swivel and rubber table protectors for grab-and-go work. Check price on Amazon
The machines

2-In-1 Table Vise 3.3" Bench Clamp
A 2-in-1 vise that bolts down or clamps on, with a 360 degree swivel base, hardened jaws, a 2.5 inch jaw opening and a stated 3 year warranty.
Pros
- Works bolted down or clamped on
- 360 degree swivel base for multi-angle work
- Stated 3 year warranty
- Hardened jaws with a non-slip texture
Cons
- Title lists 3.3, 4.5 and 6 inch jaws while the bullets say 3.3 inch jaw width
- Tensile strength of 1500 lb is stated without context
- 2.32 kg weight is the heaviest here if you carry it around
- No anvil or pipe jaws stated

Wilton Super-Junior Clamp-On Vise, 4" Jaw Width
A 4 inch clamp-on vise from Wilton with grooved replaceable top jaws, double lockdowns, a base that rotates 45 degrees left or right, and a stated limited lifetime warranty.
Pros
- Limited lifetime warranty against manufacturing defects
- Grooved and replaceable top jaws
- Double lockdowns for stability
- Enclosed design keeps contaminants out and lubrication in
Cons
- Base rotates 45 degrees each way, not a full 360
- Only 2-1/4 inch jaw opening
- No clamping force figure is stated

Housolution Universal Table Vise 3 Inch
A 3 inch clamp-on vise in cast steel with a chrome-plated spindle, a stated 300 kg clamping force, a 360 degree swivel base and a 5 mm thickened jaw.
Pros
- Stated 300 kg jaw clamping force
- Cast steel body with chrome-plated spindle and nuts
- 360 degree swivel base with 2.4 inch throat capacity
- 0.2 inch thickened jaw for grip
Cons
- The listing warns against adding lever force to the screw rod
- No warranty term is stated
- Clamps tables up to 2.4 inches only
- No anvil or pipe jaws stated

IRWIN Tools Clamp-On Vise, 3", 226303
A 3 inch IRWIN clamp-on vise with integrated pipe jaws, an anvil shaping horn and a clamp that fits tables up to 2 inches thick.
Pros
- Integrated pipe jaws for round stock
- Anvil shaping horn built into the design
- Clamps onto tables up to 2 inches thick
- Simple, compact general purpose vise
Cons
- 2 inch jaw capacity is smaller than the Housolution
- No swivel base stated
- No warranty term is stated
- Material listed only as blend

MYTEC Home Vise Clamp-On Vise,2.5"
A compact 2.5 inch clamp-on vise in cast iron with a 360 degree swivel base, rubber table protectors and a 3.31 lb net weight.
Pros
- 3.31 lb net weight is the most portable here
- 360 degree swivel base
- Rubber washers protect the table top
- No drilling into the table needed
Cons
- 2 inch jaw width and 2.5 inch opening are the smallest here
- No warranty term stated, only a refund or exchange promise
- No anvil or pipe jaws stated
- Clamps tables up to 2.4 inches only
Other welders and gear to compare
Bench ViseCheck price on Amazon
2” Gray Cast Iron Mini Table Clamp Bench Vise 2” mini viseCheck price on Amazon
MAXMAN Clamp Bench ViseCheck price on Amazon
Mini Vise ClampCheck price on Amazon
IRWIN VISE-GRIP Original Locking C-ClampCheck price on Amazon
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Spec sheet comparison
| Spec | Wilton Super-Junior Clamp-On Vise | GOEHNER’s 2-in-1 Clamp-On Bench Vise | Housolution 3 Inch Universal Table Vise | IRWIN 3 Inch Clamp-On Vise | MYTEC 2.5 Inch Clamp-On Home Vise |
|---|---|---|---|---|---|
| Jaw width | 4 in | 3.3 in (bullets); title lists 3.3 in, 4.5 in and 6 in | 2.75 in (70 mm) | Not stated | 2.0 in |
| Jaw opening | 2-1/4 in | 2.5 in | 3 in (77.5 mm) | 2 in jaw capacity | 2.5 in |
| Max table thickness | Not stated | 4 in | 2.4 in (61 mm) | 2 in | 2.4 in |
| Swivel | 45 deg left or right | 360 deg | 360 deg | Not stated | 360 deg |
| Pipe jaws | Not stated | Not stated | Not stated | Integrated | Not stated |
| Anvil | Not stated | Not stated | Not stated | Shaping horn | Not stated |
| Material | Cast iron | Cast steel | Cast steel | Blend | Cast iron |
| Weight | 0.27 g listed (error) | 2.32 kg | 3.5 lb | 1.7 kg | 3.31 lb |
| Warranty | Limited lifetime | 3 year | Not stated | Not stated | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 22 October 2026.
Buying guide: the best clamp on bench vise
Jaw opening and width
Jaw opening decides what fits between the jaws; jaw width decides how much of the part gets gripped. The Housolution opens to 3 inches with a 2.75 inch jaw width, the widest opening here. The Wilton has the widest jaws at 4 inches but opens only 2-1/4 inches. The IRWIN and MYTEC are the smallest, with 2 inch and 2.5 inch openings respectively. Match the opening to the thickest stock you clamp regularly.
Table grip thickness
The clamp underneath the vise decides which benches it fits. The GOEHNER’s clamps tables up to 4 inches thick, the most here. The Housolution and MYTEC take up to 2.4 inches, and the IRWIN takes up to 2 inches. Measure your bench edge before ordering; a thick farm bench can rule out the smaller clamps.
Swivel or fixed base
A swivel base lets you rotate the work to the angle that suits the weld or the file stroke. The Housolution, GOEHNER’s and MYTEC state 360 degree swivel bases. The Wilton rotates 45 degrees left or right, which is enough for positioning but not a full turn. The IRWIN listing states no swivel. If you work both left and right handed, or clamp long parts at odd angles, favor the full swivel.
Pipe jaws and anvils
Only the IRWIN states integrated pipe jaws for holding round stock, plus an anvil shaping horn for light forming. None of the other four listings state pipe jaws or an anvil. If your work is mostly tube, conduit and round bar, the IRWIN’s pipe jaws are the deciding feature; for flat stock and plate, the wider jaws of the Wilton or Housolution matter more.
Weight and portability
Clamp-on vises get carried to the work, so weight matters. The MYTEC states a 3.31 lb net weight, the most portable here, and the IRWIN states 1.7 kg. The Housolution states 3.5 lb and the GOEHNER’s 2.32 kg. The Wilton’s spec table lists 0.27 g, which is a listing error, so ignore it. The lighter the vise, the easier the carry; heavier sits steadier under a hammer.
Warranty reality check
Only two listings state a warranty term. The Wilton states a limited lifetime warranty against manufacturing defects, the strongest term here. The GOEHNER’s states a 3 year warranty. The MYTEC promises refund or exchange for dissatisfaction with no time limit, which is a satisfaction promise rather than a warranty. The Housolution and IRWIN state no warranty term at all.
FAQ for welders
Can I weld with the workpiece held in a clamp-on vise?
Yes, for tacking and light fabrication. A clamp-on vise holds the part while you tack it, but it is not a substitute for a welding table on heavy work. The Housolution’s stated 300 kg clamping force and the Wilton’s double lockdowns are the sturdiest holding features stated here.
Will a clamp-on vise damage my workbench?
It can mark the edge if the clamp bites bare wood or metal. The MYTEC includes rubber washers specifically to prevent table scratches, and the GOEHNER’s clamps without drilling. Put a scrap of wood or leather under the clamp pads on a bench you care about.
How much jaw opening do I need?
Match it to your stock. The picks here range from a 2 inch jaw capacity on the IRWIN to a 3 inch opening on the Housolution. If you regularly clamp 2×2 tube or thick plate, the Housolution’s 3 inch opening or the Wilton’s 4 inch wide jaws give more room than the smaller picks.
Can I hammer on a clamp-on vise?
Lightly. Clamp-on vises are for holding, not for heavy hammering the way a bolted-down forge vise is. The IRWIN’s anvil shaping horn is built for light forming. Heavy hammer blows can shift the clamp or, per the Housolution’s own warning, break the jaw if you add lever force to the screw.
Clamp-on or bolt-on: which holds better?
Bolt-on holds better for heavy work, but the GOEHNER’s gives you both: it bolts down or clamps on. Choose clamp-on when you need portability, a rented space, or multiple work spots. Our bench vise vs welding vise comparison covers the broader choice.
What is the difference between jaw opening and jaw width?
Jaw opening is how far the jaws separate, the thickest part they accept. Jaw width is the length of the jaw face, how much of the part gets gripped. The Wilton shows the split clearly: 4 inch jaw width but only 2-1/4 inch opening. Both numbers are in each listing’s spec table, so check both.
Scoring, line by line
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| GOEHNER’s 2-in-1 Clamp-On Bench Vise | 9.6 | 29 | 21 | 21 | 4 | 3 |
| Wilton Super-Junior Clamp-On Vise | 9.5 | 28 | 21 | 21 | 0 | 3 |
| Housolution 3 Inch Universal Table Vise | 9.5 | 28 | 21 | 20 | 4 | 0 |
| IRWIN 3 Inch Clamp-On Vise | 9.4 | 26 | 20 | 19 | 0 | 0 |
| MYTEC 2.5 Inch Clamp-On Home Vise | 9.3 | 26 | 19 | 19 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.
The WeldGear Score weighs performance, build, value, safety and warranty. The Wilton earns top safety and warranty points for its replaceable grooved jaws, double lockdowns and stated limited lifetime warranty. The GOEHNER’s earns warranty points for its stated 3 year term and cert points for hardened jaws. The Housolution earns cert points for its quenched, hardened jaws and stated 300 kg clamping force. The IRWIN and MYTEC state no warranty term, so neither earns warranty points.
More welding guides
Related: best heavy duty bench vise, best small bench vise, best bench vise for metal work, and best bench vise for farm shop. Also see our welding tables and carts for the work surface under the vise.




