Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Dewalt DW758 Review: Pros, Cons and Who It Suits

Review of the DEWALT DW758 8-inch bench grinder: 3/4 HP induction motor, cast iron build, two wheels and guards included, plus the weight error to check.

Dewalt DW758 Review: Pros, Cons and Who It Suits
On this page

The bench grinder

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more

DEWALT DW758 8-Inch Bench Grinder

DEWALT DW758 8-Inch Bench Grinder

DEWALT9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-inch bench grinder with a 3/4 HP induction motor, cast iron build and two wheels plus guards in the box, reviewed from its listing.

Pros

  • 3/4 HP induction motor at 3600 rpm
  • Cast iron base and motor housing
  • 36-grit and 60-grit wheels included
  • Eye shields, spark deflectors and tool rests included

Cons

  • Stated weight of 0.22 kg is implausible
  • No warranty stated
  • Fixed 3600 rpm, no speed control stated
  • Corded only, no battery option stated

DEWALT DW758 review: the short verdict

The DEWALT DW758 is an 8-inch bench grinder with a 3/4 HP induction motor running 3600 rpm, built on a cast iron base for the workshop bench. It ships with both a 36-grit and a 60-grit wheel plus eye shields, spark deflectors and tool rests. We have not used this grinder ourselves; this review is based on the Amazon listing and the specs published there. The short verdict: a straightforward cast iron bench grinder with a useful two-wheel setup, but the listing states an impossible weight, so read the specs section before buying.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Key specs

Spec Stated value Where stated Note
Model number DW758 Title and spec table –
Motor 3/4 HP induction, 3600 rpm Bullets and spec table –
Wheels 8 in; 36-grit and 60-grit included Title and box contents –
Wheel spacing 12-1/2 in Bullets –
Tool rests Precision-machined aluminum Bullets –
Guards Eye shields, spark deflectors Box contents –
Build Cast iron base and housing Bullets –
Dimensions 17.75 x 12.63 x 11.73 in Spec table –
Weight 0.22 kg Spec table Implausible for a cast iron 8-inch grinder
Warranty Not stated – No warranty in listing

Ratings in this table are the makers’ own claims taken from each product page (19 October 2026). The stated weight is implausible, detailed under Limitations.

A bench grinder is the shop’s sharpening and deburring station: two wheels on one arbor for grinding and shaping. The DW758 runs a 3/4 HP induction motor at 3600 rpm, which the listing positions for industrial grinding applications and high-speed material removal. The listing describes the 3/4 HP induction motor as providing superior power for industrial grinding applications.

The build is cast iron for both the base and the motor housing, which the listing says provides durability and prolonged life. The 12-1/2-inch distance between the wheels gives room for larger and longer workpieces, and the precision-machined aluminum tool rests let the user position work accurately against the wheels. Rear exhaust ports in the wheel guards are stated to smooth operation.

The two included wheels cover the common jobs: 36 grit for fast material removal and shaping, 60 grit for finer grinding and edge work. Eye shields and spark deflectors are in the box. It measures 17.75 by 12.63 by 11.73 inches.

What the DW758 does well

Motor. 3/4 HP induction at 3600 rpm is the power the listing positions for industrial grinding applications.

Build. Cast iron base and motor housing, which the listing says provide durability and prolonged life.

Two wheels included. 36-grit and 60-grit wheels in the box cover rough shaping and finer work with no extra purchase.

Safety accessories. Eye shields, spark deflectors and tool rests are all included in the box per the listing.

Wheel spacing. 12-1/2 inches between wheels suits larger and longer grinding applications per the listing.

Limitations

Impossible weight. The spec table lists item weight as 0.22 kg, which is absurd for a cast iron 8-inch bench grinder. Confirm the real weight with the seller.

No stated warranty term. The listing states no warranty at all. For a grinder aimed at industrial applications, that is a gap.

No speed control stated. The motor runs at a fixed 3600 rpm per the listing. Fine grinding and heat-sensitive edges sometimes want slower speeds.

Corded only. Corded electric with no battery option stated.

How we scored it

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
DEWALT DW758 9.5 30 22 21 0 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

The Gear Score weighs performance, build, value, safety and warranty from the listing figures. The DW758 scores on the 3/4 HP induction motor, cast iron build and the complete two-wheel accessory set; it loses points for the implausible weight and the missing warranty. How we pick explains the weights.

Who should buy the DEWALT DW758, and who should skip it

Buy it if you want a no-nonsense 8-inch bench grinder for sharpening, deburring and shaping in a home or farm shop. The cast iron build, induction motor and included guards are the right combination. Skip it if you need a stated warranty term, variable speed, or a grinder you can verify the weight of before ordering.

Buying advice: getting the most from the DW758

Match the motor to the work. The listing rates the DW758 at 3/4 HP with an induction motor running 3600 rpm, positioned for industrial grinding applications and high-speed material removal. At 3600 rpm on 8-inch wheels, this is a fast grinder, which suits shaping and deburring; fine edges that cannot take heat want a lighter touch or a slower machine.

Two wheels, two jobs. The 36-grit wheel is the roughing wheel: shaping, heavy deburring and fast stock removal. The 60-grit wheel is the refining wheel: touching up edges and finer grinding. Having both in the box means no extra purchase to start, and the listing includes the eye shields, spark deflectors and tool rests too. As the wheels wear, replace like with like unless the work changes; the listing states no other grit options.

Use the wheel spacing. The 12-1/2-inch distance between the wheels is generous for an 8-inch grinder, and the listing calls it out for larger and longer grinding applications. That spacing matters when grinding long tools: a lawnmower blade or a long chisel needs room to travel across the wheel without hitting the opposite guard. The precision-machined aluminum tool rests give a stable platform to register the work against.

Plan the bench spot. At 17.75 by 12.63 by 11.73 inches, the DW758 needs a real footprint on a flat, solid bench. Leave clearance behind the machine: the rear exhaust ports in the wheel guards need open air for the smoother operation the listing promises. The cast iron base needs a bench that does not flex.

Verify the gaps before buying. The 0.22 kg listed weight is a listing error on a cast iron 8-inch grinder; confirm the real weight with the seller, since it affects shipping cost and whether the bench can carry it. The listing states no warranty at all, so ask for the terms in writing. And the speed is a fixed 3600 rpm with no speed control stated: if the work is mostly fine edges and heat-sensitive tools, a variable-speed or wet grinder suits better, as the Alternatives section notes.

Do not skip the guards. The listing includes eye shields and spark deflectors. Set the eye shields close to the wheels and keep the spark deflectors adjusted as the wheels wear down. The tool rests need the same attention: reset them close to the wheel as it shrinks, so work cannot wedge between the rest and the wheel.

Power and placement. The DW758 is corded electric with no battery option stated, so it lives where an outlet reaches. The listing does not state the cord length or the amperage draw, only the 3/4 HP motor rating. Plan the outlet before the bench spot: an extension cord shared with other shop tools is a poor permanent setup for a grinder that runs long sessions.

Before the first grind

  • Confirm the actual weight with the seller: 0.22 kg is a listing error.
  • Ask the seller for the warranty terms in writing, since the listing states none.
  • Check the wheels for true running before first use and dress them if needed.
  • Mount it solidly to the bench: vibration can make a loose grinder walk at 3600 rpm.

Alternatives

If the missing warranty puts you off, look for a grinder whose listing states its warranty terms up front. For slower, cooler grinding of fine edges, look at variable-speed or wet grinders instead of this fixed-speed unit.

FAQ for welders

What is the motor power of the DW758?

The listing states a 3/4 HP induction motor running at 3600 rpm.

What wheels are included?

A 36-grit wheel and a 60-grit wheel, plus eye shields, spark deflectors and tool rests.

How much does it weigh?

The listing says 0.22 kg, which is implausible for a cast iron 8-inch grinder; confirm the real weight with the seller.

Does it have a warranty?

The listing states no warranty. Ask the seller for the terms.

What is the wheel spacing?

12-1/2 inches between the wheels per the listing, suited to larger and longer workpieces.

More buying guides