Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Cost of a Propane Furnace: Prices and What Affects Them

A propane melting furnace melts gold, silver, copper and aluminum with a gas burner, and what it costs depends on capacity, burner output and the kit in the box.

Cost of a Propane Furnace: Prices and What Affects Them
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1MMasters 18KG Large Propane Melting Furnace KitMMasters 18KG Large Propane Melting Furnace Kit9.7/10View on Amazon
  2. 2VEVOR Propane Melting Furnace Kit 16KG/35lbs GasVEVOR Propane Melting Furnace Kit 16KG/35lbs Gas9.7/10View on Amazon
  3. 3Nelyrho 6KG Propane Melting Furnace KitNelyrho 6KG Propane Melting Furnace Kit9.6/10View on Amazon
  4. 4Nelyrho 12KG Hinged Flip Top Propane MeltingNelyrho 12KG Hinged Flip Top Propane Melting9.5/10View on Amazon

Pouring an ingot starts with a simple question: what does the furnace itself cost, and what pushes that cost up or down. The cost of a propane furnace comes down to how much metal it melts in one batch, how hot its burner runs, and how much kit arrives in the box. A small furnace for jewelry and hobby casting costs less than a large one built for bigger pours, while a kit that includes the crucible, tongs and mold costs more than a bare furnace on its own. This guide explains each of those cost drivers, then looks at the propane melting furnaces in this guide so the price of each one makes sense against what it melts.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

MMasters 18KG Large Propane Melting Furnace Kit

MMasters 18KG Large Propane Melting Furnace Kit

Molten Masters9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The largest capacity here at 18KG, with a burner rated up to 135,000 BTU and a full kit that includes a crucible, tongs, an ingot mold and gloves.

Pros

  • Largest capacity in this guide at 18KG per batch
  • Burner rated up to 135,000 BTU
  • Kit includes crucible, tongs, graphite ingot mold and heat-resistant gloves
  • 1-inch thick insulation layer inside the chamber

Cons

  • No warranty term is stated
  • No dimensions stated in the listing data
  • No regulator pressure is stated
  • 18KG capacity suits larger batches, less handy for small jewelry pours
VEVOR Propane Melting Furnace Kit 16KG/35lbs Gas

VEVOR Propane Melting Furnace Kit 16KG/35lbs Gas

VEVOR9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16KG dual-burner furnace in 1.3mm thickened stainless steel, with a 35lbs capacity rating and a clean body free of visible welds.

Pros

  • Dual-burner structure for rapid temperature rise
  • 1.3mm thickened stainless steel body and burners
  • 16KG capacity, stated as 35lbs in the listing
  • Flange-connected burner sleeve and threaded propane hose connections

Cons

  • No warranty term is stated
  • No burner output in BTU is stated
  • No regulator pressure is stated
  • 34.6 pounds, so plan the bench spot before lighting the burner
Nelyrho 6KG Propane Melting Furnace Kit

Nelyrho 6KG Propane Melting Furnace Kit

Nelyrho9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A complete 6KG kit with a 135,000 BTU burner, a 30 PSI propane regulator and the only stated warranty here.

Pros

  • 135,000 BTU burner with a 30 PSI propane regulator
  • Complete kit: 6KG graphite crucible with pouring spout, ingot mold, dual tongs, fire brick and gloves
  • 1 year manufacturer warranty, the only stated term here
  • Dual tongs for lifting and pouring

Cons

  • 6KG capacity limits each batch to small pours
  • 6KG graphite crucible has no larger size listed for bigger pours
  • No ingot mold dimensions are stated
  • Gloves are included but the listing states no glove material
Nelyrho 12KG Hinged Flip Top Propane Melting

Nelyrho 12KG Hinged Flip Top Propane Melting

Nelyrho9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12KG stainless furnace with a hinged flip-top lid, a 1-inch thick insulation layer and a kit that includes tongs, a crucible and a gas hose with regulator.

Pros

  • Hinged flip-top lid for easy loading and removal
  • 1-inch thick insulation layer
  • Heavy-duty stainless steel body
  • Kit includes tongs, a crucible and a gas hose with regulator

Cons

  • No burner output in BTU is stated
  • No ingot mold is listed in the kit
  • Hinged lid needs clearance above the furnace to swing open
  • No crucible material is stated

Cost of a Propane Furnace: What Sets the Price

Capacity sets the price more than anything else. The furnaces in this guide melt from 6KG to 18KG per batch, and the larger crucible, thicker body and stronger burner of the bigger furnaces cost more to build. A 6KG furnace suits jewelry, small ingots and scrap too small for a larger pour, while an 18KG furnace suits larger batches and longer casting sessions.

Burner output is the next driver. The 6KG Nelyrho and the 18KG Molten Masters both state a burner rated up to 135,000 BTU, and the 6KG kit pairs that burner with a 30 PSI propane regulator. The VEVOR lists a dual-burner structure instead of a BTU figure, and the 12KG Nelyrho states no burner output, so compare the stated figures rather than guessing at the unstated ones.

Kit contents are the last driver. A kit that includes a graphite crucible with a pouring spout, an ingot mold, dual tongs, fire brick and gloves costs more than a furnace that ships with tongs and a crucible alone, because each of those parts would need buying separately. Check the kit list before ordering, and check what the listing leaves out.

Compare the Furnaces

Furnace Capacity Max temp Burner Kit
Molten Masters 18KG 18KG 2500°F Up to 135,000 BTU Crucible, tongs, mold, gloves
VEVOR 16KG 16KG (35lbs) 2500°F Dual burner Crucibles and tongs
Nelyrho 6KG 6KG 2500°F 135,000 BTU, 30 PSI regulator Crucible, mold, dual tongs, fire brick, gloves
Nelyrho 12KG 12KG 2500°F Not stated Tongs, crucible, hose with regulator

Every furnace here reaches 2500°F, so temperature does not separate them. Capacity, burner output and kit contents do, and the table above shows where each one stands on each of those points.

The Gear: Propane Melting Furnaces for the Pour

Melting is the step that needs the furnace, so the gear below is ranked by how well each furnace melts a batch, how solidly it is built, and how much value the kit gives for the money.

How to Choose the Right Size

Match the furnace to the batch. A 6KG furnace melts enough for jewelry, small ingots and hobby casting, and it is the easiest here to move and store. A 12KG furnace suits a hobby caster who pours larger ingots or melts scrap in bigger lots, and the hinged flip-top lid makes loading and removal easier. A 16KG or 18KG furnace suits larger batches and longer sessions, where the extra capacity saves repeat melts.

Check the kit list against the pour. If the kit has no ingot mold, plan on buying one. If it has no gloves, plan on heat-resistant gloves of the right size. And if the listing states no regulator, check that the hose and regulator in the box fit the propane tank on hand.

Melting Safely With a Propane Furnace

Molten metal and propane demand respect. Melt outdoors or with strong ventilation, keep a carbon monoxide alarm nearby, and keep a fire extinguisher within reach. Use dry tools and dry molds only, wear a full face shield and leather protective gear, and never melt unknown or sealed scrap. Check the guidance from OSHA on machine guarding and from CPSC on carbon monoxide before lighting the burner.

FAQ for welders

How much metal does a 6KG propane furnace melt in one batch?

The listing states the 6KG Nelyrho handles up to 6KG of metal per batch. That suits jewelry, small ingots and hobby casting. Larger batches call for a larger crucible, such as the 12KG, 16KG or 18KG furnaces in this guide.

How hot does a propane melting furnace get?

Every furnace in this guide reaches up to 2500°F, according to the listings. That covers gold, silver, copper and aluminum, and the 6KG and 18KG kits also list brass. Check the listing for the metal in hand before ordering, since the stated maximum is the same across the furnaces here.

What comes with a propane melting furnace kit?

It varies by kit. The 6KG Nelyrho kit includes a 6KG graphite crucible with a pouring spout, an ingot mold, dual tongs, fire brick and gloves. The 18KG Molten Masters kit includes a crucible, tongs, a graphite ingot mold, heat-resistant gloves, a burner, a hose with regulator, a manifold splitter and a ceramic fiber insulation board, while the 12KG Nelyrho kit includes tongs, a crucible and a gas hose with regulator.

Do I need a regulator with a propane furnace?

Three of the kits in this guide include one. The 6KG Nelyrho lists a 30 PSI propane regulator, and the 12KG Nelyrho and the 18KG Molten Masters list a hose with regulator. The VEVOR lists a standard threaded propane hose connection and no regulator, so check what the kit includes and that the hose fits the propane tank on hand before ordering.

Can a propane furnace melt gold and silver?

Yes, according to the listings. All of the furnaces here state gold, silver, copper and aluminum among the metals they melt, and the 6KG and 18KG kits also list brass. Melt outdoors or with strong ventilation, and never melt unknown or sealed scrap.

What size propane furnace should a beginner start with?

A 6KG furnace is a sensible start for jewelry, small ingots and hobby casting, since it melts a small batch and the kit includes the crucible, tongs, mold and gloves. A caster who already pours larger ingots can step up to a 12KG or 16KG furnace. Match the size to the batch, not to the bench.

Related: /Metal Fab Tools/, best gold melting furnace, electric vs propane melting furnace, graphite vs silicon carbide crucible, and best sand for sand casting.

More buying guides