Best 1/8 Inch Blind Rivets (2026)
5 packs of 1/8 inch blind rivets compared on grip length, grip range, pack count, storage and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVGBUY 2709.7/10View on Amazon - 2
Assortment PickZQZ Assortment9.7/10View on Amazon - 3
Longest GripALLCLEAN 2009.6/10View on Amazon - 4
Black FinishMaozaa 100 Black9.6/10View on Amazon
A bracket needs joining to a panel where you can only reach one side, or a duct joint needs closing without pulling the whole run apart. The fastener for that job has to set from one side and hold without a back-side wrench. That job is where best 1/8 inch blind rivets earn their place in the shop, and this roundup compares 5 packs on grip length, grip range, pack count, storage and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall VGBUY 270: 270 pcs of 1/8 x 3/8 rivets with a stated grip range of 5.0-7.0mm and the only stated warranty here, 24 months. Check price on Amazon
- Assortment Pick ZQZ Assortment: 320 pcs across 1/4, 5/16, 3/8 and 1/2 inch lengths, 80 pcs of each, in a portable transparent case. Check price on Amazon
- Longest Grip ALLCLEAN 200: 200 pcs at 1/8 x 1/2 with a stated grip range of 7.0-9.0mm, the highest grip range stated here. Check price on Amazon
- Black Finish Maozaa 100 Black: 100 pcs of black 1/8 x 1/4 rivets with a stated grip range of 1-2mm. Check price on Amazon
The machines

(270Pcs) 1/8" x 3/8" Aluminum Blind Rivets
A 270 pc pack of 1/8 x 3/8 aluminum blind rivets with a stated grip range of 5.0-7.0mm and the only stated warranty here, 24 months.
Pros
- 270 pcs in a box, the largest single-size pack here
- Stated grip range of 5.0-7.0mm
- 24-month warranty stated in the listing
- Self-plugging open end design with a smooth surface
Cons
- No certification stated
- Packed in a box, not a compartment case
- Silver only, no color choice stated
- Grip range tops out at 7.0mm, below the ALLCLEAN range

320Pcs 1/8 Pop Rivets Assortment Kit
A 320 pc assortment kit of 1/8 inch aluminum blind rivets in 1/4, 5/16, 3/8 and 1/2 inch lengths, stored in a portable transparent case.
Pros
- 80 pcs of each length, 320 pcs in total
- Portable transparent case with sizes kept separately in plastic bags
- Single-sided installation for tight spaces and hard-to-reach areas
- Aluminum and steel build with corrosion resistance stated
Cons
- No warranty term stated
- No certification stated
- No grip range stated for any single length
- Heaviest stated pack weight here at 13.7 ounces

ALLCLEAN 200 Pcs 1/8" x 1/2" Aluminum Blind
A 200 pc pack of 1/8 x 1/2 aluminum blind rivets with a stated grip range of 7.0-9.0mm, the highest grip range stated here.
Pros
- Grip range of 7.0-9.0mm, the highest stated here
- 200 pcs for larger runs of one size
- Aluminum grip and steel mandrel with corrosion and acid resistance stated
- Self-plugging open end design with a smooth surface
Cons
- No warranty term stated
- No certification stated
- No item weight or package dimensions stated

Maozaa 100 PCS 1/8" x 1/4" Aluminum Blind Rivets
A 100 pc pack of black 1/8 x 1/4 aluminum blind rivets with a stated grip range of 1-2mm and a package weight of 3.84 ounces.
Pros
- Black finish, the only dark color here
- Stated grip range of 1-2mm
- 100 pcs in a small package that stores easily
- Aluminum grip and steel mandrel, light weight and durable per the listing
Cons
- No warranty term stated
- No certification stated
- Grip range of 1-2mm is the narrowest stated here
- No rivet tool included; the listing says you need a compatible blind rivet tool

100pcs 1/8" x 1/4" Aluminum Blind Rivets
A 100 pc pack of 1/8 x 1/4 aluminum blind rivets with a stated grip range of 1.0-3.0mm, packed in a paper bag.
Pros
- Stated grip range of 1.0-3.0mm
- Aluminum grip and steel mandrel with corrosion and acid resistance stated
- Domed head style stated
- Packed in a paper bag for easy storage
Cons
- No warranty term stated
- No certification stated
- Color given as Silver in one field and Silver+Orange in another
Other welders and gear to compare
BCP Fasteners Stainless Steel Pop RivetsCheck price on Amazon
Arrow RSAW1/8IP Short Aluminum 1/8-Inch Pop Rivets for MetalCheck price on Amazon
100pcs 3/16" x 1/4" Aluminum Blind RivetsCheck price on Amazon
WensilonCheck price on Amazon
1/8 x 3/8 304 Stainless Blind Rivets 100 PackCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Size | Grip range | Pack | Warranty |
|---|---|---|---|---|---|
| VGBUY 270 | 9.7/10 | 1/8 x 3/8 in | 5.0-7.0mm | 270 pcs | 24 months |
| ZQZ Assortment | 9.7/10 | 1/8 in, mixed lengths | Not stated | 320 pcs | None stated |
| ALLCLEAN 200 | 9.6/10 | 1/8 x 1/2 in | 7.0-9.0mm | 200 pcs | None stated |
| Maozaa 100 Black | 9.6/10 | 1/8 x 1/4 in | 1-2mm | 100 pcs | None stated |
| ISPINNER 100 | 9.5/10 | 1/8 x 1/4 in | 1.0-3.0mm | 100 pcs | None stated |
Ratings in this table are the makers’ own claims taken from each product page (28 October 2026).
Buying guide: what matters in best 1/8 inch blind rivets
Grip length and grip range
Grip length is the rivet length in the size, from 1/4 inch to 1/2 inch across these packs, and grip range is the material thickness the rivet can clamp, stated as 1-2mm on the Maozaa pack, 1.0-3.0mm on the ISPINNER pack, 5.0-7.0mm on the VGBUY pack and 7.0-9.0mm on the ALLCLEAN pack. Match the range to the stack you are joining, not just the diameter: a 1/4 inch rivet with a 1-2mm range and a 1/2 inch rivet with a 7.0-9.0mm range serve different stacks.
Aluminum grip, steel mandrel
Every pack here pairs an aluminum grip with a steel mandrel, and every listing claims corrosion resistance, with acid resistance claimed on the ISPINNER, VGBUY and ALLCLEAN listings. That pairing keeps the rivet light and rust resistant while the steel mandrel pulls clean. Check the material line before ordering, since a pack that only states aluminum may read the same at a glance.
Pack size and storage
Pack counts here run 100, 200, 270 and 320 pieces, with the ZQZ kit splitting 320 pcs into 80 pcs of each length in a portable transparent case. A single-size pack suits repeat work in one size, while the assortment kit suits a bench that sees mixed jobs. The ISPINNER pack is packed in a paper bag, so plan a small bin if the bag will not survive the shop.
Watch the count
Two listings in this roundup disagree with themselves on count: ISPINNER says 100pcs in the title and bullets but 225pcs in the spec table, and ALLCLEAN says 200 pieces in the title and bullets but 100Pcs in the spec table. Trust the title and bullets, and count the pack on arrival before starting a run of joints.
Use as directed. Set rivets with a blind rivet tool compatible with the rivet diameter and material, as the Maozaa listing states, and keep children away from these rivets. Check the grip range against the stack before pulling, and count the pack on arrival where the listing disagrees with itself.
Before You Strike an Arc
- Match the grip range to the stack: 1-2mm, 1.0-3.0mm, 5.0-7.0mm and 7.0-9.0mm are all stated across these packs.
- Check rivet gun fit: the Maozaa listing says you need a blind rivet tool compatible with the rivet diameter and material, and VGBUY says its rivets are well matched with the rivet gun.
- Count the pack on arrival: the ISPINNER and ALLCLEAN listings disagree with themselves on count.
- Keep sizes apart: the ZQZ kit stores each length separately in plastic bags inside a portable transparent case.
- Check the color on arrival: the ISPINNER listing reads Silver in one field and Silver+Orange in another.
FAQ for welders
What are blind rivets?
A blind rivet is a fastener that sets from one side, for joints where you cannot reach the back of the work. These listings describe aluminum blind rivets with a steel mandrel, set with a rivet gun, for metal, automotive and DIY work. The ZQZ listing notes single-sided installation for tight spaces and hard-to-reach areas.
What grip length do I need?
Match the grip range to the stack, not just the diameter. These packs state 1-2mm, 1.0-3.0mm, 5.0-7.0mm and 7.0-9.0mm ranges, with grip lengths from 1/4 inch to 1/2 inch. Measure the stack first, then pick the pack whose stated range covers it.
Do blind rivets need a special tool?
Yes, a blind rivet tool, also called a rivet gun. The Maozaa listing says you need a tool compatible with the rivet diameter and material, and the VGBUY listing says its rivets are well matched with the rivet gun. No tool is included in any pack here.
How much is 1 box of blind rivets?
By count, not by price: the packs here hold 100, 200, 270 or 320 pieces, depending on the listing. The ZQZ kit holds 320 pcs split into 80 pcs of each length, while the single-size packs hold 100, 200 or 270 pieces. No prices are stated in this article.
When is a blind rivet set?
When the mandrel breaks and the rivet body holds the joint. The VGBUY listing describes it plainly: put the rivet into the gun and pull the rod repeatedly until the rivet breaks, then the work is done. The ALLCLEAN and Maozaa listings describe the same self-plugging open end design.
Related: the metal fab tools hub, the best air rivet gun, the best rivet gun kit, the best rivet gun for aluminum rivets, and the pneumatic vs electric rivet gun.
Scoring, line by line
Each rivet is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the site’s How We Pick page. Rivets have no electrical safety listing to state, so every pick here scores nothing on that criterion; the ranking comes from the other criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VGBUY 270 | 9.7 | 30 | 21 | 21 | n/a | 3 |
| ZQZ Assortment | 9.7 | 30 | 21 | 22 | n/a | 0 |
| ALLCLEAN 200 | 9.6 | 28 | 20 | 21 | n/a | 0 |
| Maozaa 100 Black | 9.6 | 28 | 20 | 20 | n/a | 0 |
| ISPINNER 100 | 9.5 | 27 | 20 | 19 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.





