Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Dewalt DCS387B Review: Pros, Cons & Who It’s For

A DEWALT DCS387B review from the listing: a compact 20V MAX reciprocating saw, bare tool only, with a 1-1/8 in stroke, 0-2,900 spm trigger and LED, its gaps and who it fits.

Dewalt DCS387B Review: Pros, Cons & Who It’s For
On this page

Cutting a rusted exhaust hanger off a frame rail or trimming angle iron in a tight engine bay is where a full-size recip saw will not fit. This dewalt dcs387b review looks at DEWALT’s compact 20V MAX answer: a 14 in reciprocating saw with a 1-1/8 in stroke, a 0-2,900 spm variable-speed trigger and an LED work light, sold as a bare tool. We have not used the saw ourselves; this review is based on DEWALT’s Amazon listing and the specs published there.

As an Amazon Associate I earn from qualifying purchases. WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The saw

DEWALT 20V MAX Compact Reciprocating Saw

DEWALT 20V MAX Compact Reciprocating Saw

DEWALT9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact 20V MAX cordless reciprocating saw, 14 in long, with a 1-1/8 in stroke, a 0-2,900 spm variable-speed trigger, a 4-position blade clamp and an LED work light, sold as a bare tool.

Pros

  • 1-1/8 in stroke with a 0-2,900 spm variable trigger
  • 14 in compact body fits between studs and in tight spaces
  • 4-position blade clamp with tool-free changes for flush cuts
  • 3-year limited manufacturers warranty stated

Cons

  • Blade length listed as 14 in, the same as the tool's stated length
  • Weight stated as 2.25 kg only, with no lb figure given

Dewalt DCS387B review: the short verdict

The DCS387B is a compact cordless reciprocating saw on the 20V MAX battery platform. The pitch is size: at 14 inches long it fits between studs and into confined spaces where a full-size saw will not go. The working specs are a 1-1/8 in stroke length, a variable-speed trigger rated 0-2,900 spm, a 4-position blade clamp with tool-free changes, a pivoting shoe and a bright LED for dark work areas.

The listing trips over itself in the spec table. The title says bare tool only, but the table says 1 battery is required. The bullets say 0-2,900 spm, but the table says 2900 rpm. The bullets say the tool is 14 inches long, but the table lists a 14 in blade length. Trust the title and bullets: bare tool, 0-2,900 spm, 14 in saw. The warranty is stated plainly as a 3 year limited manufacturers warranty, which is the strongest part of the paper spec.

Key specs

Spec DEWALT DCS387B Stated in Watch for
Power 20V MAX battery, bare tool only Title Spec table says 1 battery is required; the title says bare tool only
Stroke length 1-1/8 in Bullets
Speed 0-2,900 spm, variable trigger Bullets Spec table lists 2900 rpm; recip saws are rated in spm
Overall length 14 in Bullets Spec table also lists 14.75 in L x 3.5 in W x 7.5 in H
Blade clamp 4-position, tool-free changes Bullets
Blade material High Speed Steel Spec table
Shoe Pivoting shoe Bullets
LED Bright LED work light Bullets
Weight 2.25 kg Spec table Stated in kg only; no lb figure
Surface recommendation Wood Spec table A gap for metal fab buyers
Warranty 3 year limited manufacturers warranty Spec table Stated under Manufacturer Warranty Description

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 19 October 2026. Where the spec table disagrees with the title and bullets, the table is noted as the source of the conflict.

What the DCS387B does well

Compact enough for real confined spaces

Fourteen inches is the number that defines this saw. The listing says the compact, lightweight design fits between studs and lets you cut in confined spaces, and that is the whole reason to buy a compact recip over a full-size one. Overhead cuts, cuts inside a frame rail, cuts where the wall is in the way: the short body is the feature.

A real variable-speed trigger

The trigger runs 0-2,900 spm, so blade speed follows your finger. Slow for starting a cut or working around a line, fast once the blade is in the material. The listing frames that as blade control for precision cuts, and for a compact saw that lives in tight spots, control matters more than raw speed.

Blade changes without tools

The 4-position blade clamp allows flush cutting and gives positional versatility, and blade changes are tool-free. On a job where the blade dulls mid-cut, that means a swap with no hex key hunt. The pivoting shoe adds to the same idea: it rides the work surface and gives the saw something to pivot against while cutting.

Light where it is dark

The bright LED illuminates dark work areas. Engine bays, under-dash work, inside cabinets: the places a compact saw fits are usually the places you cannot see. A built-in light is a small thing until you are cutting blind.

A stated 3-year warranty

The listing states a 3 year limited manufacturers warranty, a concrete term. For a bare tool that will see shop abuse, a stated warranty beats the silence most listings offer.

Limitations

  • Battery confusion: the title and included components say bare tool only, but the spec table says 1 battery is required. Trust the title: no battery is in the box. You supply the 20V MAX battery.
  • Speed units disagree: the bullets say 0-2,900 spm while the spec table says 2900 rpm. Reciprocating saws are rated in strokes per minute, so trust the bullets and ignore the rpm row.
  • Blade length row is suspect: the spec table lists a 14 in blade length, but the bullets say the tool itself is 14 inches long. A 14 in blade on a 14 in compact saw reads as a copied row rather than a real blade spec; trust the bullets’ tool length and treat the blade row as a listing error.
  • Weight in kg only: the listing states 2.25 kg and never gives the figure in pounds, so there is no US-unit weight to quote.
  • Surface recommendation says Wood: the spec table recommends wood. If your work is mostly metal, that is a gap worth noting before you buy a saw for the fab shop.
  • Odd 20-watt row: the spec table lists 20 watts, a strange figure for a 20V MAX tool. It reads like a default row rather than a real spec.

How we scored it

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
DEWALT DCS387B 9.5 27 19 20 0 4

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

The Gear Score weighs performance, build, value, safety and warranty. The DCS387B scores for its compact 14 in body, the 1-1/8 in stroke with a true variable trigger, and the stated 3-year warranty. The listing contradictions on battery, speed units and blade length, plus the metric-only weight, hold it back. Safety scores zero because the listing states no certification.

Who should buy the DCS387B, and who should skip it

Buy it if

  • You already own 20V MAX batteries and want a compact saw for tight spaces.
  • Your cuts happen between studs, in engine bays, or anywhere a full-size recip will not fit.
  • You want tool-free blade changes and a 4-position clamp for flush cuts.
  • A stated 3-year limited warranty matters to you.

Skip it if

  • You have no 20V MAX batteries: this is a bare tool, and the battery is a separate purchase.
  • Your work is mostly metal: the listing’s surface recommendation says Wood. A portable band saw for metal or an angle grinder for cutting metal may fit the fab shop better.
  • Sloppy listing math bothers you: the spec table fights the title and bullets on battery, speed and blade length.

Before You Strike an Arc

  • Power: this is a bare tool on the 20V MAX platform, so confirm you own a charged 20V MAX battery before the first cut; none is in the box.
  • Blades are consumables: stock the blades your work needs. The spec table lists high speed steel blade material and 24 teeth, so match the blade to the material.
  • On arrival, check that the 4-position blade clamp locks a blade solidly and releases it without tools, and that the pivoting shoe moves freely.
  • Plan the cut: 14 inches of saw still needs room for the 1-1/8 in stroke plus the blade, so check clearance beyond the confined space, not just inside it.

Alternatives

FAQ for welders

Does the DEWALT DCS387B come with a battery?

No. The title says bare tool only, and the included components list just the saw. The spec table’s row saying 1 battery is required contradicts the title; trust the title and supply your own 20V MAX battery.

What is the stroke length and speed?

The bullets state a 1-1/8 in stroke length and a 0-2,900 spm variable-speed trigger. The spec table lists 2900 rpm, but reciprocating saws are rated in strokes per minute, so the bullets’ figure is the one to use.

Can the DCS387B cut metal?

The listing’s surface recommendation says Wood, which is a gap for a fab shop buyer. For steel work, a plasma cutter or angle grinder is the more honest tool for the job.

How long is the saw?

The bullets state 14 inches in total length, which is why the listing says it fits between studs. The spec table lists 14.75 in long, 3.5 in wide and 7.5 in high; treat the bullets’ 14 in as the working figure.

Is there a warranty?

Yes. The listing states a 3 year limited manufacturers warranty, a concrete term.

Related: the best portable band saw for metal, cut off wheel vs grinding wheel, how to bevel metal for welding, and the best metal chop saw for home shop.

More buying guides